We have demonstrated a new strategy for enhancing solar evaporation by using floating light-absorbing materials. Floating Fe₃O₄/C magnetic particles with an average size of 500 nm were synthesized by carbonization of poly(furfuryl alcohol) (PFA) incorporated with Fe₃O₄ nanoparticles. The Fe₃O₄/C particles had a BET surface area of 429 m² g⁻¹, and a density of 1.44 g cm⁻³. Because of their hydrophobicity and a bulk packing density of 0.53 g cm⁻³, Fe₃O₄/C particles were floatable on water. Our results indicated that these Fe₃O₄/C particles enhanced the water evaporation rate by as much as a factor of 2.3 in the solar evaporation of 3.5% salt water. In addition, Fe₃O₄/C particles were easily recycled using a magnet, and stable after being recycled three times. Our work provides a low-cost and highly effective way for accelerating solar evaporation for industrial applications such as solar desalination, salt production, brine management and wastewater treatment.

Solid oxide fuel cells (SOFCs) have been considered as promising candidates to tackle the need for sustainable and efficient energy conversion devices. However, the current operating temperature of SOFCs poses critical challenges relating to the costs of fabrication and materials selection. To overcome these issues, many attempts have been made by the SOFC research and manufacturing communities for lowering the operating temperature to intermediate ranges (600–800 °C) and even lower temperatures (below 600 °C). Despite the interesting success and technical advantages obtained with the low-temperature SOFC, on the other hand, the cell operation at low temperature could noticeably increase the electrolyte ohmic loss and the polarization losses of the electrode that cause a decrease in the overall cell performance and energy conversion efficiency. In addition, the electrolyte ionic conductivity exponentially decreases with a decrease in operating temperature based on the Arrhenius conduction equation for semiconductors. To address these challenges, a variety of materials and fabrication methods have been developed in the past few years which are the subject of this critical review. Therefore, this paper focuses on the recent advances in the development of new low-temperature SOFCs materials, especially low-temperature electrolytes and electrodes with improved electrochemical properties, as well as summarizing the matching current collectors and sealants for the low-temperature region. Different strategies for improving the cell efficiency, the impact of operating variables on the performance of SOFCs, and the available choice of stack designs, as well as the costing factors, operational limits, and performance prospects, have been briefly summarized in this work.

Hydrogen is known to be the carbon-neutral alternative energy carrier with the highest energy density. Currently, more than 95% of hydrogen production technologies rely on fossil fuels, resulting in greenhouse gas emissions. Water electrolysis is one of the most widely used technologies for hydrogen generation. Nuclear power, a renewable energy source, can provide the heat needed for the process of steam electrolysis for clean hydrogen production. This review paper analyses the recent progress in hydrogen generation via high-temperature steam electrolysis through solid oxide electrolysis cells using nuclear thermal energy. Protons and oxygen-ions conducting solid oxide electrolysis processes are discussed in this paper. The scope of this review report covers a broad range, including the recent advances in material development for each component (i.e., hydrogen electrode, oxygen electrode, electrolyte, interconnect, and sealant), degradation mechanisms, and countermeasures to mitigate them.

Solid oxide electrolyser (SOE) technology emerges as a promising alternative, typified by high-efficiency water-splitting capability and lower cost for large-scale hydrogen production. Electrolytes are the critical part of SOECs and SOFCs, which affect the performance and operation temperatures.