Carlos Ivan Briones-Herrera

Prof. Carlos Ivan Briones-Herrera

Universidad Juárez del Estado de Durango, Durango, Mexico
orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
26 June 2020 in Remote Sensing
Verified
Journal Article
Open access
PDF file
CBCarlos Ivan Briones-Herrera
Carlos Ivan Briones-Herrera
Daniel Jose Vega-NievaDaniel Jose Vega-Nieva
Daniel Jose Vega-Nieva
NMNorma Monjaras
Norma Monjaras
JBJaime Briseño-Reyes
Jaime Briseño-Reyes
Pablito Marcelo López-SerranoPablito Marcelo López-Serrano
Pablito Marcelo López-Serrano
SPSean Parks
Sean Parks
In contrast with current operational products of burned area, which are generally available one month after the fire, active fires are readily available, with potential application for early evaluation of approximate fire perimeters to support fire management decision making in near real time. While previous coarse-scale studies have focused on relating the number of active fires to a burned area, some local-scale studies have proposed the spatial aggregation of active fires to directly obtain early estimate perimeters from active fires. Nevertheless, further analysis of this latter technique, including the definition of aggregation distance and large-scale testing, is still required. There is a need for studies that evaluate the potential of active fire aggregation for rapid initial fire perimeter delineation, particularly taking advantage of the improved spatial resolution of the Visible Infrared Imaging Radiometer (VIIRS) 375 m, over large areas and long periods of study. The current study tested the use of convex hull algorithms for deriving coarse-scale perimeters from Moderate Resolution Imaging Spectroradiometer (MODIS) and Visible Infrared Imaging Radiometer Suite (VIIRS) active fire detections, compared against the mapped perimeter of the MODIS collection 6 (MCD64A1) burned area. We analyzed the effect of aggregation distance (750, 1000, 1125 and 1500 m) on the relationships of active fire perimeters with MCD64A1, for both individual fire perimeter prediction and total burned area estimation, for the period 2012–2108 in Mexico. The aggregation of active fire detections from MODIS and VIIRS demonstrated a potential to offer coarse-scale early estimates of the perimeters of large fires, which can be available to support fire monitoring and management in near real time. Total burned area predicted from aggregated active fires followed the same temporal behavior as the standard MCD64A1 burned area, with potential to also account for the role of smaller fires detected by the thermal anomalies. The proposed methodology, based on easily available algorithms of point aggregation, is susceptible to be utilized both for near real-time and historical fire perimeter evaluation elsewhere. Future studies might test active fires aggregation between regions or biomes with contrasting fuel characteristics and human activity patterns against medium resolution (e.g., Landsat and Sentinel) fire perimeters. Furthermore, coarse-scale active fire perimeters might be utilized to locate areas where such higher-resolution imagery can be downloaded to improve the evaluation of fire extent and impact.

29 July 2022 in Forests
Verified
Journal Article
Open access
PDF file
ARAdrian Jimenez Ruano
Adrian Jimenez Ruano
WJWilliam Matthew Jolly
William Matthew Jolly
Patrick FreebornPatrick Freeborn
Patrick Freeborn
Daniel Jose Vega-NievaDaniel Jose Vega-Nieva
Daniel Jose Vega-Nieva
NMNorma Monjaras
Norma Monjaras
MRMarcos Rodrigues
Marcos Rodrigues
Spatial wildfire ignition predictions are needed to ensure efficient and effective wildfire response, and robust methods for modeling new wildfire occurrences are ever-emerging. Here, ignition locations of natural and human-caused wildfires across the state of Montana (USA) from 1992 to 2017 were intersected with static, 30 m resolution spatial data that captured topography, fuel availability, and human transport infrastructure. Once combined, the data were used to train several simple and multiple logistic generalized linear models (GLMs) and generalized additive models (GAMs) to predict the spatial likelihood of natural and human-caused ignitions. Increasingly more complex models that included spatial smoothing terms were better at distinguishing locations with and without natural and human-caused ignitions, achieving area under the receiver operating characteristic curves (AUCs) of 0.84 and 0.89, respectively. Whilst both ignition types were more likely to occur at intermediate fuel loads, as characterized by the local maximum Normalized Difference Vegetation Index (NDVI), naturally-ignited wildfires were more locally influenced by slope, while human-caused wildfires were more locally influenced by distance to roads. Static maps of ignition likelihood were verified by demonstrating that mean annual ignition densities (# yr−1 km−1) were higher within areas of higher predicted probabilities. Although the spatial models developed herein only address the static component of wildfire hazard, they provide a foundation upon which dynamic data can be superimposed to forecast and map wildfire ignition probabilities statewide on a timely basis.

29 June 2022 in Remote Sensing
Verified
Journal Article
Open access
PDF file
Adrián Silva-CardozaAdrián Silva-Cardoza
Adrián Silva-Cardoza
Daniel Jose Vega-NievaDaniel Jose Vega-Nieva
Daniel Jose Vega-Nieva
JBJaime Briseño-Reyes
Jaime Briseño-Reyes
CBCarlos Ivan Briones-Herrera
Carlos Ivan Briones-Herrera
Pablito Marcelo López-SerranoPablito Marcelo López-Serrano
Pablito Marcelo López-Serrano
LHLisa M. Holsinger
Lisa M. Holsinger
The remote sensing of fire severity and burned area is fundamental in the evaluation of fire impacts. The current study aimed to: (i) compare Sentinel-2 (S2) spectral indices to predict field-observed fire severity in Durango, Mexico; (ii) evaluate the effect of the compositing period (1 or 3 months), techniques (average or minimum), and phenological correction (constant offset, c, against a novel relative phenological correction, rc) on fire severity mapping, and (iii) determine fire perimeter accuracy. The Relative Burn Ratio (RBR), using S2 bands 8a and 12, provided the best correspondence with field-based fire severity (FBS). One-month rc minimum composites showed the highest correspondence with FBS (R2 = 0.83). The decrease in R2 using 3 months rather than 1 month was ≥0.05 (0.05–0.15) for c composites and <0.05 (0.02–0.03) for rc composites. Furthermore, using rc increased the R2 by 0.05–0.09 and 0.10–0.15 for the 3-month RBR and dNBR compared to the corresponding c composites. Rc composites also showed increases of up to 0.16–0.22 and 0.08–0.11 in kappa values and overall accuracy, respectively, in mapping fire perimeters against c composites. These results suggest a promising potential of the novel relative phenological correction to be systematically applied with automated algorithms to improve the accuracy and robustness of fire severity and perimeter evaluations.

9 May 2019 in Forests
Verified
Journal Article
Open access
PDF file
CBCarlos Ivan Briones-Herrera
Carlos Ivan Briones-Herrera
Daniel Jose Vega-NievaDaniel Jose Vega-Nieva
Daniel Jose Vega-Nieva
NMNorma Monjaras
Norma Monjaras
FFFavian Flores-Medina
Favian Flores-Medina
Pablito Marcelo López-SerranoPablito Marcelo López-Serrano
Pablito Marcelo López-Serrano
WJWilliam Matthew Jolly
William Matthew Jolly
Understanding the spatial patterns of fire occurrence is key for improved forest fires management, particularly under global change scenarios. Very few studies have attempted to relate satellite-based aboveground biomass maps of moderate spatial resolution to spatial fire occurrence under a variety of climatic and vegetation conditions. This study focuses on modeling and mapping fire occurrence based on fire suppression data from 2005–2015 from aboveground biomass—expressed as aboveground carbon density (AGCD)—for the main ecoregions in Mexico. Our results showed that at each ecoregion, unimodal or humped relationships were found between AGCD and fire occurrence, which might be explained by varying constraints of fuel and climate limitation to fire activity. Weibull equations successfully fitted the fire occurrence distributions from AGCD, with the lowest fit for the desert shrub-dominated north region that had the lowest number of observed fires. The models for predicting fire occurrence from AGCD were significantly different by region, with the exception of the temperate forest in the northwest and northeast regions that could be modeled with a single Weibull model. Our results suggest that AGCD could be used to estimate spatial fire occurrence maps; those estimates could be integrated into operational GIS tools for assistance in fire danger mapping and fire and fuel management decision-making. Further investigation of anthropogenic drivers of fire occurrence and fuel characteristics should be considered for improving the operational spatial planning of fire management. The modeling strategy presented here could be replicated in other countries or regions, based on remote-sensed measurements of aboveground biomass and fire activity or fire suppression records.

15 January 2022 in Forests
Verified
Journal Article
Open access
PDF file
CBCarlos Ivan Briones-Herrera
Carlos Ivan Briones-Herrera
Daniel Jose Vega-NievaDaniel Jose Vega-Nieva
Daniel Jose Vega-Nieva
JBJaime Briseño-Reyes
Jaime Briseño-Reyes
NMNorma Monjaras
Norma Monjaras
Pablito Marcelo López-SerranoPablito Marcelo López-Serrano
Pablito Marcelo López-Serrano
WJWilliam Matthew Jolly
William Matthew Jolly
Context and Background. Active fires have the potential to provide early estimates of fire perimeters, but there is a lack of information about the best active fire aggregation distances and how they can vary between fuel types, particularly in large areas of study under diverse climatic conditions. Objectives. The current study aimed at analyzing the effect of aggregation distances for mapping fire perimeters from active fires for contrasting fuel types and regions in Mexico. Materials and Methods. Detections of MODIS and VIIRS active fires from the period 2012–2018 were used to obtain perimeters of aggregated active fires (AGAF) at four aggregation distances (750, 1000, 1125, and 1500 m). AGAF perimeters were compared against MODIS MCD64A1 burned area for a total of 24 fuel types and regions covering all the forest area of Mexico. Results/findings. Optimum aggregation distances varied between fuel types and regions, with the longest aggregation distances observed for the most arid regions and fuel types dominated by shrubs and grasslands. Lowest aggregation distances were obtained in the regions and fuel types with the densest forest canopy and more humid climate. Purpose/Novelty. To our best knowledge, this study is the first to analyze the effect of fuel type on the optimum aggregation distance for mapping fire perimeters directly from aggregated active fires. The methodology presented here can be used operationally in Mexico and elsewhere, by accounting for fuel-specific aggregation distances, for improving rapid estimates of fire perimeters. These early fire perimeters could be potentially available in near-real time (at every satellite pass with a 12 h latency) in operational fire monitoring GIS systems to support rapid assessment of fire progression and fire suppression planning.

29 January 2025 in Fire
Verified
Journal Article
Open access
PDF file
DODiana Aime Tinoco Orozco
Diana Aime Tinoco Orozco
Daniel Jose Vega-NievaDaniel Jose Vega-Nieva
Daniel Jose Vega-Nieva
JBJaime Briseño-Reyes
Jaime Briseño-Reyes
MAMESIAS EDWIN DOMINGUEZ AMAYA
MESIAS EDWIN DOMINGUEZ AMAYA
Adrián Silva-CardozaAdrián Silva-Cardoza
Adrián Silva-Cardoza
AGAna Daría Ruiz González
Ana Daría Ruiz González
Mapping potential fire intensity is a fundamental tool for fire management planning. Despite the wide use of Fire Radiative Power (FRP) as an indicator of expected fire intensity and fire emissions, very few studies have spatially analyzed the role of remotely sensed proxies of vegetation productivity to explain FRP. The current study aimed at modeling and mapping the relationships between aboveground biomass and Moderate Resolution Imaging Spectroradiometer (MODIS) maximum FRP, at 1 km pixel, in 2011–2020, for each of 46 fuel regions in the entirety of Mexico. Maximum FRP–biomass relationships supported a novel hypothesis of varying constraints of fire intensity. In lower-productivity areas, such as semiarid shrub- and grass-dominated ecosystems, fine fuel loads limited fire occurrence and FRP was positively related to biomass. In the more productive areas, such as temperate or tropical forests, a humped relationship of FRP against biomass was observed, suggesting an intermediate-productivity hypothesis of maximum fire intensity within those regions. In those areas, the highest fire intensity was observed in the intermediate biomass areas, where surface (timber understory) and crown fuel availability, together with higher wind penetration, can result in crown fires. On the contrary, within the most productive areas, the lowest intensity occurred, likely due to weather and fuel (timber litter) limitations.