Hydrogels are polymeric networks having the ability to absorb a large volume of water. Flexibility, versatility, stimuli-responsive, soft structure are the advantages of hydrogels. It is classified based on its source, preparation, ionic charge, response, crosslinking and physical properties. Hydrogels are used in various fields like agriculture, food industry, biosensor, biomedical, etc. Even though hydrogels are used in various industries, more researches are going in the field of biomedical applications because of its resembles to living tissue, biocompatibility, and biodegradability. Here, we are mainly focused on the commercially available hydrogels used for biomedical applications like wound dressings, contact lenses, cosmetic applications, tissue engineering, and drug delivery.
Artificial skin substitute made of polymeric films are of great demand in the field of skin tissue engineering. We report here the fabrication of carboxymethyl cellulose (CMC) and poly(ethylene glycol) (PEG) blend films by solution casting method for wound healing applications. The physicochemical characteristics and the thermal stability of the films were analyzed. The surface morphology shows crystalline structures with large hexagonal-like platelet crystals of CMC on the surface of the films. Pure CMC films exhibited higher tensile strength than the CMC/PEG blend films. The swelling ratio (SR) of the films was influenced by the pH of Tris–HCL buffer (2.0, 5.0, and 7.0), which increased with increase in pH. The hemocompatibility assay and cytotoxicity test using NIH 3T3 fibroblast cells showed that the films were biocompatible. To evaluate the wound healing efficacy, the films were applied in full-thickness wounds created in normal and diabetic Wistar albino rats. The wounds healed faster with pure CMC film compared to blend films in both normal and diabetic rats, evidenced by intensive collagen formation in histopathological analysis. Thus, the films have potential application in skin regeneration, thereby to restore the structural and functional characteristics of the skin.
22 February 2010 in Journal of Materials Chemistry
Triple-shape polymers (TSP) can memorize two independent shapes, which are recovered when the temperature is subsequently increased. Certain applications do not allow triggering of the triple-shape effect (TSE) by environmental heating (e.g. potential damaging of surrounding tissue) and therefore require a non-contact activation. Here we explored whether polymer nanocomposites can be designed, which enable non-contact activation of TSE in an alternating magnetic field. A series of nanocomposites were synthesized by incorporation of silica coated iron(III)oxide nanoparticles into a polymer network matrix containing poly(ε-caprolactone) (PCL) and poly(cyclohexyl methacrylate) (PCHMA) segments. Triple-shape functionalization of the materials was realized by application of different thermomechanical procedures (single or two dual-step), in which samples were deformed by bending to minimize changes in S/V ratio during shape recovery. For quantification of triple-shape properties inductive heating experiments were conducted in an alternating magnetic field at frequency of f = 258 kHz. By increasing the magnetic field strength H the triple-shape effect was triggered, while the maximum achievable temperature Tmax and the shape change was monitored using an infrared video camera. Excellent triple-shape properties were achieved for nanocomposites containing 40 wt-% of PCL exhibiting a two-step recovery of shapes B and C, when stimulated by step-wise increasing the magnetic field strength. In this way the TSE could be characterized by two distinct switching magnetic strengths Hsw,1(A → B) and Hsw,2(B → C) corresponding to the switching temperatures determined in cyclic, thermomechanical tensile tests for thermally-induced TSP.
The present study involves the development of citric acid-cross-linked carboxymethyl cellulose (C3CA) scaffolds by a freeze-drying process. Scaffolds were fabricated at different freezing temperatures of −20, −40, or −80 °C to investigate the influence of scaffold pore size on bone regeneration. All three scaffolds were porous in structure, and the pore size was measured to be 74 ± 4, 55 ± 6, and 46 ± 5 μm for −20, −40, and −80 °C scaffolds. The pores were larger in scaffolds processed at −20 °C compared to −40 and −80 °C, indicating the reduction in pore size of the scaffolds with a decrease in freezing temperature. The cytocompatibility, cell proliferation, and differentiation in C3CA scaffolds were assessed with the Saos-2 osteoblast cell line. These scaffolds supported the proliferation and differentiation of Saos-2 cells with significant matrix mineralization in scaffolds processed at −40 °C. Subcutaneous implantation of C3CA scaffolds in the rat model was investigated for its ability of vascularization and new matrix tissue formation. The matrix formation was observed at the earliest of 14 days in the scaffolds when processed at −40 °C while it was observed only after 28 days of implantation with the scaffolds processed at −20 and −80 °C. These results suggest that the citric acid-cross-linked CMC scaffolds processed at −40 °C can be promising for bone tissue engineering application.