Viktor Hacker

Prof. Dr. Viktor Hacker

Graz University of Technology, Austria
orcid

Research Focus & Metrics

Academic Career Length

29Years (1998-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
27 November 2013 in RSC Advances
Verified
Journal Article
Open access
PDF file
AGAndrey W Golubkov
Andrey W Golubkov
DFDavid Fuchs
David Fuchs
JWJulian Wagner
Julian Wagner
HWHelmar Wiltsche
Helmar Wiltsche
CSChristoph Stangl
Christoph Stangl
Viktor HackerViktor Hacker
Viktor Hacker
Li-ion batteries play an ever-increasing role in our daily life. Therefore, it is important to understand the potential risks involved with these devices. In this work we demonstrate the thermal runaway characteristics of three types of commercially available Li-ion batteries with the format 18650. The Li-ion batteries were deliberately driven into thermal runaway by overheating under controlled conditions. Cell temperatures up to 850 °C and a gas release of up to 0.27 mol were measured. The main gas components were quantified with gas-chromatography. The safety of Li-ion batteries is determined by their composition, size, energy content, design and quality. This work investigated the influence of different cathode-material chemistry on the safety of commercial graphite-based 18650 cells. The active cathode materials of the three tested cell types were (a) LiFePO4, (b) Li(Ni0.45Mn0.45Co0.10)O2 and (c) a blend of LiCoO2 and Li(Ni0.50Mn0.25Co0.25)O2.

22 June 2015 in RSC Advances
Verified
Journal Article
Open access
PDF file
AGAndrey W Golubkov
Andrey W Golubkov
SSSebastian Scheikl
Sebastian Scheikl
RPRené Planteu
René Planteu
GVGernot Voitic
Gernot Voitic
HWHelmar Wiltsche
Helmar Wiltsche
Viktor HackerViktor Hacker
Viktor Hacker
Thermal runaway characteristics of two types of commercially available 18650 cells, based on LixFePO4 and Lix (Ni0.80Co0.15Al0.05)O2 were investigated in detail. The cells were preconditioned to state of charge (SOC) values in the range of 0% to 143%; this ensured that the working SOC window as well as overcharge conditions were covered in the experiments. Subsequently a series of temperature-ramp tests was performed with the preconditioned cells. Charged cells went into a thermal runaway, when heated above a critical temperature. The following thermal runaway parameters are provided for each experiment with the two cell types: temperature of a first detected exothermic reaction, maximum cell temperature, amount of produced ventgas and the composition of the ventgas. The dependence of those parameters with respect to the SOC is presented and a model of the major reactions during the thermal runaway is made.

1 December 2008 in Journal of Power Sources
Verified
Journal Article
Closed access
GRGerd Rabenstein
Gerd Rabenstein
Viktor HackerViktor Hacker
Viktor Hacker

10 October 2016 in RSC Advances
Verified
Journal Article
Open access
PDF file
GVG. Voitic
G. Voitic
Viktor HackerViktor Hacker
Viktor Hacker
Chemical looping water splitting or chemical looping hydrogen is a very promising technology for the production of hydrogen. In recent years extensive research has enabled remarkable leaps towards a successful integration of the chemical looping technology into a future hydrogen infrastructure. Progress has been reported with iron based oxygen carriers for stable hydrogen production capacity over consecutive cycles without significant signs of degradation. The high stability improvements were achieved by adding alien metal oxides or by integrating the active component into a mineral structure which offers excellent resistance towards thermal stress. Prototype systems from small μ-systems up to 50 kW have been operated with promising results. The chemical looping water splitting process was broadened in terms of its application area and utilization of feedstocks using a variety of renewable and fossil resources. The three-reactor system was clearly advantageous due to its flexibility, heat integration capabilities and possibility to produce separate pure streams of hydrogen, CO2 and N2. However two-reactor and single fixed-bed reactor systems were successfully operated as well. This review aims to survey the recently presented literature in detail and systematically summarize the gathered data.

1 March 2000 in Journal of Power Sources
Verified
Journal Article
Closed access
Viktor HackerViktor Hacker
Viktor Hacker
RFRobert Fankhauser
Robert Fankhauser
GFGottfried Faleschini
Gottfried Faleschini
HFHeidrun Fuchs
Heidrun Fuchs
KFKurt Friedrich
Kurt Friedrich
KKKarl Kordesch
Karl Kordesch

1 August 2008 in Journal of Power Sources
Verified
Journal Article
Closed access
WBW.R. Baumgartner
W.R. Baumgartner
PPP. Parz
P. Parz
SFS.D. Fraser
S.D. Fraser
EWE. Wallnöfer
E. Wallnöfer
Viktor HackerViktor Hacker
Viktor Hacker