Jyoti Sinha

Prof. Jyoti Sinha

The University of Manchester
orcid

Research Focus & Metrics

Academic Career Length

20Years (2007-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
24 September 2015 in Structural Health Monitoring
Verified
Journal Article
Closed access
Akilu Yunusa-kaltungoAkilu Yunusa-kaltungo
Akilu Yunusa-kaltungo
Jyoti SinhaJyoti Sinha
Jyoti Sinha
ANAdrian D Nembhard
Adrian D Nembhard
Equipment standardisation as a cost-effective means of rationalising maintenance spares has significantly increased the existence of several identical (similar components and configurations) ‘as installed’ machines in most industrial sites. However, the dynamic behaviours of such identical machines usually differ due to variations in their foundation flexibilities, which is perhaps why separate analysis is often required for each machine during fault diagnosis. In practice, the fault diagnosis process is even further complicated by the fact that analysis is often conducted at individual measurement locations for different speeds, since a significant number of rotating machines operate at various speeds. Hence, through the experimental simulation of a similar practical scenario of two identically configured ‘as installed’ rotating machines with different foundation flexibilities, this study proposes a simplified vibration-based fault diagnosis technique that may be valuable for fault detection irrespective of foundation flexibilities or operating speeds. On both experimental rigs with different foundation flexibilities, several common rotor-related faults were independently simulated. Data combination method was then used for computing composite higher order spectra (composite bispectrum and composite trispectrum), after which principal component analysis is used for fault separation and diagnosis of the grouped data. Hence, this article highlights the usefulness of the proposed fault diagnosis approach for enhancing the reliability of identical ‘as installed’ rotating machines, irrespective of the rotating speeds and foundation flexibilities.

26 February 2014 in Structural Health Monitoring
Verified
Journal Article
Closed access
ANAdrian D Nembhard
Adrian D Nembhard
Jyoti SinhaJyoti Sinha
Jyoti Sinha
APAndrew J Pinkerton
Andrew J Pinkerton
KEKeri Elbhbah
Keri Elbhbah
Traditional practice in vibration-based condition monitoring of rotating machines with a multiple bearing system, such as turbo-generator sets, is data intensive. Since a number of sensors are required at each bearing location, the task of diagnosing faults on these systems may be daunting for even an experienced analyst. Hence, this study seeks to develop a simplified fault diagnosis method that uses just a single vibration and a single temperature sensor on each bearing. Experiments were done on a laboratory rig with two dissimilar length rotors supported through four ball bearings. Commonly encountered rotor-related faults were independently simulated and compared to a baseline condition. For reference, conventional vibration spectrum analysis was done first. Overall vibration analysis was then conducted and combined with temperature data in two diagnosis approaches. Learning from the first combined approach, which had some limitations, was used to propose a principal component analysis–based approach that was demonstrated with and without temperature data. Results of the proposed principal component analysis–based method suggest that supplementing vibration data with temperature measurements gives improved fault diagnosis when compared to fault diagnosis using vibration data alone. The experimental rig, measurements done, description of both combined approaches and results obtained are presented in this article.

23 October 2020 in Machines
Verified
Journal Article
Open access
PDF file
NSNatalia Espinoza Sepulveda
Natalia Espinoza Sepulveda
Jyoti SinhaJyoti Sinha
Jyoti Sinha
Artificial intelligence (AI)-based machine learning (ML) models seem to be the future for most of the applications. Recent research effort has also been made on the application of these AI and ML methods in the vibration-based faults diagnosis (VFD) in rotating machines. Several research studies have been published over the last decade on this topic. However, most of the studies are data driven, and the vibration-based ML (VML) model is generally developed on a typical machine. The developed VML model may not predict faults accurately if applied on other identical machines or a machine with different operation conditions or both. Therefore, the current research is on the development of a VML model by optimising the vibration parameters based on the dynamics of the machine. The developed model is then blindly tested at different machine operation conditions to show the robustness and reliability of the proposed VML model.

3 August 2016 in Structural Health Monitoring
Verified
Journal Article
Closed access
AYAkilu Yunusa-Kaltungo
Akilu Yunusa-Kaltungo
Jyoti SinhaJyoti Sinha
Jyoti Sinha
In an earlier study, the poly-coherent composite higher order spectra (i.e. poly-coherent composite bispectrum and trispectrum) frequency domain data fusion technique was proposed to detect different rotor-related faults. All earlier vibration-based faults detection involving the application of poly-coherent composite bispectrum and trispectrum have been solely based on the notion that the measured vibration data from all measurement locations on a rotating machine are always available and intact. In reality, industrial scenarios sometimes deviate from this notion, due to faults and/or damages associated with vibration sensors or their accessories (e.g. connecting cables). Sensitivity analysis of the method to various scenarios of measured vibration data availability (i.e. complete data from all measurement locations and missing/erroneous data from certain measurement locations) is also examined through experimental and industrial cases, so as to bring out the robustness of the method.

3 January 2024 in Applied Sciences
Verified
Journal Article
Open access
PDF file
HWHaobin Wen
Haobin Wen
LZLong Zhang
Long Zhang
Jyoti SinhaJyoti Sinha
Jyoti Sinha
On top of the condition-based maintenance (CBM) practice for rotating machinery, the robust estimation of remaining useful life (RUL) for rolling-element bearings (REB) is of particular interest. The failure of a single bearing often results in secondary defects in the connected structure and catastrophic system failures. The prediction of RUL facilitates proactive maintenance planning to ensure system reliability and minimize financial loss due to unscheduled downtime. In this paper, to acquire early and reliable estimations of useful life, the RUL prediction of REBs is formulated into nonlinear degradation state estimation tackled by the combination of the envelope spectral indicator (ESI) and extended Kalman filter (EKF). By fusing the spectral energy of the bearing fault characteristic frequencies (FCFs) in the averaged envelope spectrum, the ESI is crafted to remove the interference from rotor-dynamics and reveal the bearing deterioration process. Once the fault is identified, the recursive Bayesian method based on EKF is utilized for estimating the bearing end-of-life time via the exponential state-space model. The distinctive advantage of the proposed approach lies in its ability to make an early prediction of RUL using a small number of ESI observations, offering an efficient practice for predictive health management at the early stage of bearing fault. The performance of the proposed method is validated using publicly available experimental bearing vibration data across three different operating conditions.

5 October 2023 in Machines
Verified
Journal Article
Open access
PDF file
KAKhalid Makhlad Almutairi
Khalid Makhlad Almutairi
Jyoti SinhaJyoti Sinha
Jyoti Sinha
This study builds upon previous research that utilised a vibration-based machine learning (VML) approach for diagnosing rotor-related faults in rotating machinery. The original method used artificial neural networks (ANN) to classify rotor-related faults based on optimised vibration parameters from the time and frequency domains. This study expands the application of this vibration-based machine learning approach to include the anti-friction bearing faults in addition to the rotor faults. The earlier suggested vibration-based parameters, both in time and frequency domains, are further revised to accommodate bearing-related defects. The study utilises the measured vibration data from a laboratory-scale rotating test rig with different experimentally simulated faults in the rotor and bearings. The proposed VML model is developed for both rotor and bearing defects at a rotor speed that is above the first critical speed. To gauge the robustness of the proposed VML model, it is further tested at two different rotating speeds, one below the first critical speed and the other above the second critical speed. The paper presents the methodology, the rig and measured vibration data, the optimised parameters, and the findings.