Datacenters have become the digital backbone of the modern world. To support the growing demands on bandwidth, Datacenter Networks (DCNs) consume an increasing amount of power. Additionally, the complex cabling in traditional datacenters poses design and maintenance challenges and increases the energy cost of the cooling infrastructure by obstructing the flow of chilled air. In this paper, we present a wireless server-to-server datacenter network architecture using millimeter-wave links to eliminate the need for power-hungry switching fabric of traditional fat-tree based datacenter networks. The server-to-server wireless datacenter network (S2S-WiDCN) architecture requires Line-of-Sight (LoS) between servers to establish direct communication links. However, in the presence of an obstruction such as an IT technician, the LoS may be blocked. To address this issue, we propose a novel obstruction-aware adaptive routing algorithm for S2S-WiDCN. We evaluate the performance of S2S-WiDCN in terms of traffic flow completion duration and throughput, with different kinds of datacenter traffic as well as in presence of obstruction to LoS links. We also compare the performance and power efficiency of S2S-WiDCN with the traditional fat tree DCN as well as a Top-of-Rack (ToR)-to-ToR wireless DCN.
In this paper, a VHF air-to-ground multipath propagation channel model is proposed and channel characteristics and BER performance are analyzed. A tapped-delay line filter model with time-varying coefficients is used to model the channel. The taps represent signals with delay corresponding to their relative propagation time. Each delayed signal is modulated in amplitude and phase by independent baseband random functions of time that produces Rayleigh fading. Doppler frequency shift is also incorporated in the channel model. Channel characteristics are analyzed in terms of power delay profile, Doppler frequency shift and burst error occurrence probability. Finally, BER performance of the channel is analyzed using computer simulation and effect of interleaving and error correcting code on the performance is observed.
Datacenters have become the digital backbone of the modern society and consume enormous amounts of power. Significant portion of the power consumption is due to the power hungry switching fabric necessary for communication in the datacenter. Additionally, the complex cabling in traditional datacenters pose design and maintenance challenges and increase the energy cost of the cooling infrastructure by obstructing the flow of chilled air. In this work we address these problems of traditional datacenters by designing a server-to-server wireless datacenter network (DCN). We propose design methodologies for the use of 60GHz unlicensed millimeter-wave bands to establish direct communication links between servers in a DCN without the need for a conventional fabric. This will reduce the power consumption of the DCN significantly. We first demonstrate that such a power-efficient wireless DCN can sustain the traffic requirements encountered in small to mid-size real datacenters and provide data rates that are comparable to traditional DCNs. Having established the feasibility of a server-to-server wireless DCN in terms of performance, we estimate that its power consumption is lower by four to six times in comparison to a conventional DCN fabric.
With the increase in number of processing chips in platform based computation intensive systems such as servers, a seamless, scalable, energy efficient and high bandwidth interconnection network is required. Newly envisioned silicon interposers with Network-on-Chip (NoC) interconnection framework have emerged as an energy efficient technology for 2.5D integration of multiple processor and memory chips, where multiple chips are mounted on another die called the interposer and are interconnected using the metal layers of the interposer die. However, conventional interposer based multichip integration is limited to edge-to-edge connections between the adjacent dies leaving the interposer's routing resources underutilized. In this paper, we propose large scale utilization of the available abundant interposer resources for multichip integration by implementing a hypercube interconnection architecture in an interposer for chip-to-chip communication. Through system level simulations, we demonstrate that such multichip system integrated with interposer can provide high bandwidth and energy-efficient communication under various traffic patterns.
Servers in a data center are underutilized due to over-provisioning, which contributes heavily toward the high-power consumption of the data centers. Recent research in optimizing the energy consumption of High Performance Computing (HPC) data centers mostly focuses on consolidation of Virtual Machines (VMs) and using dynamic voltage and frequency scaling (DVFS). These approaches are inherently hardware-based, are frequently unique to individual systems, and often use simulation due to lack of access to HPC data centers. Other approaches require profiling information on the jobs in the HPC system to be available before run-time. In this paper, we propose a reinforcement learning based approach, which jointly optimizes profit and energy in the allocation of jobs to available resources, without the need for such prior information. The approach is implemented in a software scheduler used to allocate real applications from the Princeton Application Repository for Shared-Memory Computers (PARSEC) benchmark suite to a number of hardware nodes realized with Odroid-XU3 boards. Experiments show that the proposed approach increases the profit earned by 40% while simultaneously reducing energy consumption by 20% when compared to a heuristic-based approach. We also present a network-aware server consolidation algorithm called Bandwidth-Constrained Consolidation (BCC), for HPC data centers which can address the under-utilization problem of the servers. Our experiments show that the BCC consolidation technique can reduce the power consumption of a data center by up-to 37%.