Xiaomei Feng

Xiaomei Feng

Auto-generated profile, based on publicly available information

Xiaomei Feng


Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 March 2019 in Journal of Alloys and Compounds
Verified
Journal Article
Closed access
YTYe Tian
Ye Tian
YSYifu Shen
Yifu Shen
CLCongyang Lu
Congyang Lu
XFXiaomei Feng
Xiaomei Feng

1 January 2021 in Surface and Coatings Technology
Verified
Journal Article
Closed access
HLHuan Li
Huan Li
JSJing Sun
Jing Sun
JZJiajun Zang
Jiajun Zang
NSNingning Su
Ningning Su
XFXiaomei Feng
Xiaomei Feng
YSYifu Shen
Yifu Shen

1 June 2019 in Surface and Coatings Technology
Verified
Journal Article
Closed access
JJJian Jiang
Jian Jiang
XFXiaomei Feng
Xiaomei Feng
YSYifu Shen
Yifu Shen
CLCongyang Lu
Congyang Lu
YTYe Tian
Ye Tian

27 April 2024 in Materials
Verified
Journal Article
Open access
PDF file
ZYZhiyuan Yang
Zhiyuan Yang
CGChan Guo
Chan Guo
TSTao Sun
Tao Sun
JHJinpeng Hu
Jinpeng Hu
XFXiaomei Feng
Xiaomei Feng
YSYifu Shen
Yifu Shen
A sub-eutectic high-entropy alloy composed of CoCrFeNiNb0.25 was prepared using a combination of mechanical powder mixing and selective laser melting (SLM). The mechanical properties of the alloy were enhanced by employing an interlayer laser remelting process. This study demonstrates the feasibility of using mechanical mixing and SLM to form an CoCrFeNiNb0.25 alloy. The interlayer laser remelting process can effectively promote the melting of Nb particles introduced by mechanical mixing, release the stresses near the unfused Nb particles, and reduce their degradation of the specimen properties. The results indicate that the CoCrFeNiNb0.25 alloy, prepared using the interlayer laser remelting process, had an average microhardness of 376 HV, a tensile strength of 974 MPa, and an elongation at break of 10.51%. This process offers a viable approach for rapidly adjusting the composition of high-entropy alloys for SLM forming.

24 April 2020 in Surface Engineering
Verified
Journal Article
Closed access
XGXiaohan Guo
Xiaohan Guo
YSYifu Shen
Yifu Shen
XFXiaomei Feng
Xiaomei Feng
YTYe Tian
Ye Tian
CLCongyang Lu
Congyang Lu
In the current work, the mono-layer Al–Cr–Ni coating and the bi-layer Al–Ni/Al–Cr coating were successfully synthesised on the Ti–6Al–4V alloy substrate by mechanical alloying. The effect of powder ratio was studied. The microstructure and phase composition of the two coatings were investigated. The mono-layer coating was composed of grey black composite structure. In the bi-layer coating, the Al–Cr outer layer exhibited a composite structure similar to the Al–Cr–Ni coating. The results showed the approximate thickness of Al–Cr–Ni coating was 140 μm, while that of bi-layer coating was more than 200 μm. Both coatings were well bonded to the substrate. After 850°C of cyclic oxidation for 100 h, cracks only occurred at the interface of the mono-layer coating, and no significant defects were found at the two interfaces of the bi-layer coating. The cyclic oxidation test results showed the bi-layer coatings exhibited more excellent oxidation resistance.

4 August 2017 in Journal of Superconductivity and Novel Magnetism
Verified
Journal Article
Closed access
PDF file
DWDing Wang
Ding Wang
XFXiaomei Feng
Xiaomei Feng
GLGuangyao Liu
Guangyao Liu
YSYifu Shen
Yifu Shen
YLYaohai Lan
Yaohai Lan