Andrzej Szymon Borkowski

Prof. Andrzej Szymon Borkowski

Faculty of Geodesy and Cartography, Warsaw University of Technology, Warsaw, Mazowieckie, Poland
orcid

Research Focus & Metrics

Academic Career Length

16Years (2011-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
7 October 2023 in Journal of Information Technology in Construction
Verified
Journal Article
Open access
PDF file
Andrzej Szymon BorkowskiAndrzej Szymon Borkowski
Andrzej Szymon Borkowski
There is no consensus among BIM practitioners and theorists as to whether BIM is an evolution from CAD systems or a total revolution in construction. In the history of BIM, there have been a number of important, epoch-making events that have changed the direction of BIM. From the concept of BIM, to the technology used in construction, to the methodology, to the process, to the holistic idea of BIM, one can see the evolution of user approaches to its use. BIM has two dimensions: an information system and a philosophy. Thus, BIM is both a tool and a philosophy that brings about a revolution. Several decades of BIM development prompts reflection and the delineation of perhaps some stages of maturation. This paper presents a theory of cognition (epistemology), essential for understanding the history of BIM. The genesis of the separation of BIM from CAD makes it clear that specific factors influenced further developments. Thus, the aim of the study was to periodise BIM in view of various factors that may be relevant to researchers interested in BIM and companies using or implementing BIM. The literature survey maintained inclusivity to reflect both positive and critical aspects of BIM. The periodisation of the history of BIM was done due to 3 factors: idea, approach and organisational culture. The development of the BIM idea established the direction in which systems and software development was heading, the user approach forced interoperability and the organisational culture emphasised increasing efficiency. Working according to the openBIM approach or within an IPD framework is probably not the end of the anticipated level of BIM maturity. The division into periods will probably be the subject of much discussion, but will perhaps set the directions for the future.

11 December 2023 in Technologies
Verified
Journal Article
Open access
PDF file
Andrzej Szymon BorkowskiAndrzej Szymon Borkowski
Andrzej Szymon Borkowski
In the scientific community, it is difficult to find a consensus on defining BIM. Just as the acronym BIM has developed in different ways, it is also understood in different ways. Depending on its understanding, different definitions emerge. It is defined differently by organizations and standards, differently still even by academics. Many years of academic discourse on the subject have failed to produce a solution. Despite the fact that the acronym BIM has already done its work for the construction industry, it still stirs up excitement. There is still no clear definition, as the view of BIM varies from one perspective to another. This article attempts to sort out the definitions cited so far by important organizations and key academics. This review was based on a deep literature study that has attempted to be inclusive and consistent. The question still remains open: do we need a single, correct definition of BIM? The aim of this article is to try to answer this question, open up a renewed discussion and come to a satisfactory consensus. BIM can be identified with an activity, product or system. This article breaks down the definitions of BIM, identifies six key attributes of BIM, presents the evolution of the understanding of BIM and proposes new definitions in a narrow and broad approach.

26 September 2024 in Eng
Verified
Journal Article
Open access
PDF file
Andrzej Szymon BorkowskiAndrzej Szymon Borkowski
Andrzej Szymon Borkowski
AKAlicja Kubrat
Alicja Kubrat
Building information modeling (BIM) is the hottest topic of the last decade in the construction sector. BIM is interacting with other technologies toward the realization of digital twins. The integration of laser scanning technology and BIM is progressing. Increasingly, solid, mesh models are being semantically enriched for BIM. A point cloud can provide an excellent source of data for developing a BIM model. The BIM model will be refined not only geometrically but can also be saturated with non-graphical data. The problem is the lack of a clear methodology for compiling such models based on TLS and images. The research and development work between universities and companies has put modern digital solutions into practice. Thus, the purpose of this work was to develop a universal methodology for the acquisition and extraction of data from disconnected sources. In this paper, three BIM models were made based on point clouds derived from laser scanning. The case studies presented confirm the validity of the “scan to BIM approach, especially in the context of historic buildings (HBIMs). The paper posits that the integration of laser scanning, digital photogrammetry and BIM provides value in the preservation of heritage buildings. In the process of the practical work and an in-depth literature study, the ever-present limitations of BIM were identified as research challenges. The paper contributes to the discussion on the use of BIM in the design, construction and operation of buildings, including historic buildings. The acronym HBIM (heritage building information modeling) will increasingly resonate in the academic and practical work of the discipline of conservation and maintenance of historic buildings and cultural heritage sites.

13 November 2023 in Preprints.org
Verified
Preprint
Open access
PDF file
Andrzej Szymon BorkowskiAndrzej Szymon Borkowski
Andrzej Szymon Borkowski
In the scientific community, it is difficult to find a consensus on defining BIM. Just as the acronym BIM is developed in different ways, it is also understood in different ways. Depending on its understanding, different definitions emerge. It is defined differently by organizations and standards, still differently by academics. Many years of academic discourse on the subject have failed to produce a solution. Despite the fact that the acronym BIM has already done its work for the construction industry, it still stirs up excitement. There is still no clear definition, as the view of BIM varies from one perspective to another. This article attempts to sort out the definitions cited so far by important organizations and key academics. The review was based on deep literature study has attempted to be inclusive and consistent. The question still remains open: do we need a single, correct definition of BIM? The aim of the article is to try to answer this question, open up a renewed discussion and come to a satisfactory consensus. BIM can be identified with an activity, product or system. The article breaks down the definitions of BIM, identifies six key attributes of BIM, presents the evolution of the understanding of BIM and proposes new definitions in a narrow and broad approach.

25 January 2025 in Buildings
Verified
Journal Article
Open access
PDF file
Magdalena KładźMagdalena Kładź
Magdalena Kładź
Andrzej Szymon BorkowskiAndrzej Szymon Borkowski
Andrzej Szymon Borkowski
The era of openBIM is ongoing, and the open standards IDS (Information Delivery Specification) and bSDD (BuildingSMART Data Dictionary) are significantly impacting the automation of information exchange and verification in projects, using predefined data, enabling quick updates and combining it with other data. IDS and bSDD complement the widely used open IFC (Industry Foundation Classes) format, which solves the issue of purchasing both the appropriate hardware and software to work with native files from different sources. As a result, external assignments or internal tasks have the potential to precisely define the desired product, speeding up the entire process carried out according to the BIM (Building Information Modeling) methodology, reducing the number of questions about ambiguous requirements, and eliminating the need for continuous feedback on the model. Both files can be used on the developer’s side as an attachment to BIM documents, as well as on the construction site or during the bidding process. Digital IDS and bSDD files can be interpreted not only by humans but also by machines, bringing added value and usability. An identified research gap is the lack of a clear procedure for applying the mentioned standards, and thus, the common problem of purchasing software to check the quality of the model for information content. This article demonstrates the possibility of creating IDS and bSDD files in tools based on filling in specific fields and their interrelation, as well as their practical use in the process of verifying the information content of BIM models. By adopting open standards, teams can improve communication, increase productivity, and ensure continuity in data exchanges.

Verified
Journal Article
Open access
PDF file
Andrzej Szymon BorkowskiAndrzej Szymon Borkowski
Andrzej Szymon Borkowski
The integration of the Internet of Things (IoT) and Building Information Modeling (BIM) is progressing. The use of microcontrollers and sensors in buildings is described as a level 3B maturity in the use of BIM. Design companies, contractors and building operators can use IoT solutions to monitor, analyze or manage processes. As a rule, solutions based on original Arduino boards are quite an expensive investment. The aim of this research was to find a low-cost IoT solution for monitoring, analysis and management, and integrate it with a BIM model. In the present study, an inexpensive NodeMCU microcontroller and a temperature and pressure sensor were used to study the thermal comfort of users in a single-family home. During the summer season, analysis of the monitored temperature can contribute to installation (HVAC) or retrofit work (for energy efficiency). The article presents a low-cost solution for studying the thermal comfort of users using a digital twin built-in BIM. Data obtained from sensors can support both the design and management processes. The main contribution of the article enables the design, construction and use of low-cost circuits (15.57 USD) even in small developments (single-family houses, semi-detached houses, terraced houses, atrium buildings). Combining IoT sensor telemetry with BIM (maturity level 3C) is a challenge that organizations will face in the near future.