31 October 2013 in Optics Letters
The generation of wavelengths above 3 μm by nonlinear processes in short silica photonic crystal fibers is investigated numerically. It was found that wavelengths in the 3–3.5 μm range may be generated quite efficiently in centimeter-long fiber pieces when pumping with femtosecond pulses in the 1.55–2 μm range. Wavelengths in the range of 3.5–4 μm can in principle be generated, but these require shorter fiber lengths for efficient extraction. The results indicate that useful 3 μm sources may be fabricated with existing silica-based fiber technology.
7 June 2010 in Journal of the Optical Society of America B
Optics InfoBase is the Optical Society's online library for flagship journals, partnered and copublished journals, and recent proceedings from OSA conferences.
9 December 2015 in Journal of Physics D: Applied Physics
We review the recent developments in the field of ultrafast Cherenkov fiber lasers. Two essential properties of such laser systems—broad wavelength tunability and high efficiency of Cherenkov radiation wavelength conversion are discussed. The exceptional performance of the Cherenkov fiber laser systems are highlighted—dependent on the realization scheme, the Cherenkov lasers can generate the femtosecond output tunable across the entire visible and even the UV range, and for certain designs more than 40% conversion efficiency from the pump to Cherenkov signal can be achieved. The femtosecond Cherenkov laser with all-fiber architecture is presented and discussed. Operating in the visible range, it delivers 100–200 fs wavelength-tunable pulses with multimilliwatt output power and exceptionally low noise figure an order of magnitude lower than the traditional wavelength tunable supercontinuum-based femtosecond sources. The applications for Cherenkov laser systems in practical biophotonics and biomedical applications, such as bio-imaging and microscopy, are discussed.
9 June 2016 in Optics Express
A coupled-mode formalism, earlier used to describe transverse mode instabilities in single-pass optical fiber amplifiers is extended to the case of double-pass amplifiers. Contrary to the single-pass case, it is shown that the thermo-optic nonlinearity can couple light at the same frequency between the LP01 and LP11 modes, leading to a static deformation of the output beam profile. This novel phenomenon is caused by the interaction of light propagating in either direction with thermo-optic index perturbations caused by light propagating in the opposite direction. The threshold power for the static deformation is found to be several times lower than what is typically found for the dynamic modal instabilities observed in single-pass amplifiers.
18 December 2018 in Journal of the Optical Society of America B
We investigate various methods for extending the simple analytical capillary model to describe the dispersion and loss of anti-resonant hollow-core (HC) fibers without the need of detailed finite-element simulations across the desired wavelength range. This poor-man’s model can with a single fitting parameter quite accurately mimic dispersion and loss resonances and anti-resonances from full finite-element simulations. Because of the analytical basis of the model, it is easy to explore variations in core size and cladding wall thickness, and should therefore provide a valuable tool for numerical simulations of the ultrafast nonlinear dynamics of gas-filled HC fibers.
1 June 2018 in Optics Letters
Recent experiments with pulse propagation in multimode graded-index fibers have shown a nonlinear improvement in beam quality, even in situations where dissipative processes such as Raman scattering play no significant role. In this Letter, numerical simulations of beam cleanup by third-order Kerr nonlinearities in a multimode fiber are used to demonstrate that in the absence of dissipative processes beam cleanup is crucially dependent on spectral/temporal disorder and does not occur in a continuous-wave model. This finding is in accordance with fundamental considerations on entropy.