Liquid water under Mars' southern ice cap: Mars is known to host large quantities of water in solid or gaseous form, and surface rocks show clear evidence that there was liquid water on the planet in the distant past. Whether any liquid water remains on Mars today has long been debated. Orosei et al. used radar measurements from the Mars Express spacecraft to search for liquid water in Mars' southern ice cap (see the Perspective by Diez). They detected a 20-km-wide lake of liquid water underneath solid ice in the Planum Australe region. The water is probably kept from freezing by dissolved salts and the pressure of the ice above. The presence of liquid water on Mars has implications for astrobiology and future human exploration. Science , this issue p. 490 ; see also p. 448

Deals with the use of multipass synthetic aperture radar (SAR) data in order to achieve three-dimensional tomography reconstruction in presence of volumetric scattering. Starting from azimuth- and range-focused SAR data relative to the same area, neglecting any mutual interaction between the targets, and assuming the propagation in homogeneous media, we investigate the possibility to focus the data also in the elevation direction. The problem is formulated in the framework of linear inverse problem and the solution makes use of the singular value decomposition of the relevant operator. This allows us to properly take into account nonuniform orbit separation and to exploit a priori knowledge regarding the size of the volume interested by the scattering mechanism, thus leading to superresolution in the elevation direction. Results obtained on simulated data demonstrate the feasibility of the proposed processing technique.

Synthetic aperture radar (SAR) interferometry is a modern efficient technique that allows reconstructing the height profile of the observed scene. However, apart for the presence of critical nonlinear inversion steps, particularly crucial in abrupt topography scenarios, it does not allow one to separate different scattering mechanisms in the elevation (height) direction within the ground pixel. Overlay of scattering at different elevations in the same azimuth-range resolution cell can be due either to the penetration of the radiation below the surface or to perspective ambiguities caused by the side-looking geometry. Multibaseline three-dimensional (3-D) SAR focusing allows overcoming such a limitation and has thus raised great interest in the recent research. First results with real data have been only obtained in the laboratory and with airborne systems, or with limited time-span and spatial-coverage spaceborne data. This work presents a novel approach for the tomographic processing of European Remote Sensing satellite (ERS) real data for extended scenes and long time span. Besides facing problems common to the airborne case, such as the nonuniformly spaced passes, this processing requires tackling additional difficulties specific to the spaceborne case, in particular a space-varying phase calibration of the data due to atmospheric variations and possible scene deformations occurring for years-long temporal spans. First results are presented that confirm the capability of ERS multipass tomography to resolve multiple targets within the same azimuth-range cell and to map the 3-D scattering properties of the illuminated scene.

Accurate subpixel registration of synthetic aperture radar (SAR) images is an issue that is again growing interest since its initial developments related to two-pass interferometry. Recent progress in coherent (multichannel) SAR processing raises the need for accurate registration of data takes acquired with large baseline spans, high temporal coverage, and with different frequency and/or operational modes. In this paper, we discuss a SAR image-registration procedure, based on the use of external measures which allows obtaining a very accurate alignment of SAR images. The presented technique makes use of a digital elevation model and of the precise information about the acquisition flight tracks, to compute the warping functions that map the position of each pixel in the different takes, thus avoiding any approximation. The resulting algorithm is simple, robust, precise, and very efficient; as a matter of fact, it may achieve high accuracy even in critical areas, such as steep topography regions. Moreover, the availability of an analytical and exact model allows performing a detailed sensitivity analysis that can be useful in evaluating the applicability of this technique even to future high-precision satellite systems. Extensive testing, carried out on several real European Remote Sensing and ENVISAT datasets, clearly shows the effectiveness of such algorithm in registering critical SAR images

The superposition of contributions from different stable targets within the same pixel is a phenomenon that may impair the imaging and monitoring of ground scatterers via the multipass synthetic aperture radar (SAR) interferometry technique. Three-dimensional SAR imaging, also known as SAR tomography, uses multiple views to profile the scattering power at different heights. This technique has been shown to be capable of separating interfering target responses on real data. Differential SAR tomography has been recently proposed as a technique that extends the potentialities of SAR tomography to the target deformation monitoring. It performs a 4-D space-velocity imaging that enables not only separating interfering targets in elevation but also distinguishing their single slow deformation velocities. This work addresses for the first time the application of 4-D SAR imaging to real data to determine the height and mean deformation velocity of single scatterers and double-scattering mechanisms interfering at high resolution in the same pixel. It also discusses the postprocessing steps required to identify the presence of stable single and double scatterers after elevation-velocity focusing. Moreover, it proposes a technique for the extraction of time series from interfering targets to measure possible nonlinear temporal deformations.

This paper presents the design, fabrication, and characterization of a microwave resonator as a tool for concentration measurements of liquid compounds. The sensing device is a rectangular waveguide cavity tuned at 1.91 GHz, which exploits the fundamental TE₁₀₁ mode in a transmission-type configuration. The coupling structure is optimized by means of a finite element code so as to achieve a high Q-factor. According to the type of substance inside the mixture, its concentration is conveniently related to changes of the S₂₁ scattering parameter (transmission coefficient) in terms of: 1) resonance frequency; 2) 3-dB bandwidth; and 3) amplitude at the resonance frequency. Experimental tests on liquid solutions in controlled conditions are presented to evaluate the performance of the device.