The idea that a solid material can deform when stimulated by electricity originated in the late-18th century with observations of ruptures in overcharged Leyden jars, the first electrical capacitors. In 1776, Italian scientist Alessandro Volta mentioned in a letter that Italian experimenter Felice Fontana had noted volume changes in the Leyden jar upon electrification (1), an observation that launched a new field of investigation—“deformable” materials affected by electricity. More than two centuries later, the concept of “electrically stretchable materials” is at the forefront of devising bioinspired robots, tactile and haptic interfaces, and adaptive optical systems (2, 3).

Dielectric elastomer transducers consist of thin electrically insulating elastomeric membranes coated on both sides with compliant electrodes. They are a promising electromechanically active polymer technology that may be used for actuators, strain sensors, and electrical generators that harvest mechanical energy. The rapid development of this field calls for the first standards, collecting guidelines on how to assess and compare the performance of materials and devices. This paper addresses this need, presenting standardized methods for material characterisation, device testing and performance measurement. These proposed standards are intended to have a general scope and a broad applicability to different material types and device configurations. Nevertheless, they also intentionally exclude some aspects where knowledge and/or consensus in the literature were deemed to be insufficient. This is a sign of a young and vital field, whose research development is expected to benefit from this effort towards standardisation.

This paper describes the early conception and latest developments of electroactive polymer (EAP)-based sensors, actuators, electronic components, and power sources, implemented as wearable devices for smart electronic textiles (e-textiles). Such textiles, functioning as multifunctional wearable human interfaces, are today considered relevant promoters of progress and useful tools in several biomedical fields, such as biomonitoring, rehabilitation, and telemedicine. After a brief outline on ongoing research and the first products on e-textiles under commercial development, this paper presents the most highly performing EAP-based devices developed by our lab and other research groups for sensing, actuation, electronics, and energy generation/storage, with reference to their already demonstrated or potential applicability to electronic textiles

Dielectric elastomer actuators (DEA) are smart lightweight flexible materials integrating actuation, sensing, and structural functions. The field of DEAs has been progressing rapidly, with actuation strains of over 300% reported, and many application concepts demonstrated. However many DEAs are slow, exhibit large viscoelastic drift, and have short lifetimes, due principally to the use of acrylic elastomer membranes and carbon grease electrodes applied by hand. Here a DEA‐driven tunable lens, the world's fastest capable of holding a stable focal length, is presented. By using low‐loss silicone elastomers rather than acrylics, a settling time shorter than 175 μs is obtained for a 20% change in focal length. The silicone‐based lenses show a bandwidth 3 orders of magnitude higher compared to lenses of the same geometry fabricated from the acrylic elastomer. Stretchable electrodes, a carbon black and silicone composite, are precisely patterned by pad‐printing and subsequently cross‐linked, enabling strong adhesion to the elastomer and excellent resistance to abrasion. The lenses operate for over 400 million cycles without degradation, and show no change after more than two years of storage. This lens demonstrates the unmatched combination of strain, speed, and stability that DEAs can achieve, paving the way for complex fast soft machines.

This paper presents the first reported data on the embedding of highly dielectric ceramic inclusions in a rubbery host medium as a means to increase the electromechanical material response for dielectric elastomer actuation. The studied polymer/ceramic composite, consisting of a silicone matrix in which titanium dioxide powder was dispersed, exhibited, in comparison with pure silicone, a decreased elastic modulus, as well as an increased dielectric constant. The measured low frequency permittivity resulted in accordance with several classical dielectric mixing rules. The use of this material as elastomeric dielectric for planar actuators enabled a reduction of the driving electric fields, so that a transverse strain of 11% at 10 V//spl mu/m and a transverse stress of 16.5 kPa at 9 V//spl mu/m were obtained. These levels of strain and stress were respectively more than eight and four times higher than the corresponding values generated with the pure polymer matrix for analogous electrical stimuli.