The demand for rapid and nondestructive methods to determine chemical components in food and agricultural products is proliferating due to being beneficial for screening food quality. This research investigates the feasibility of Fourier transform near-infrared (FT-NIR) and Fourier transform infrared spectroscopy (FT-IR) to predict total as well as an individual type of isoflavones and oligosaccharides using intact soybean samples. A partial least square regression method was performed to develop models based on the spectral data of 310 soybean samples, which were synchronized to the reference values evaluated using a conventional assay. Furthermore, the obtained models were tested using soybean varieties not initially involved in the model construction. As a result, the best prediction models of FT-NIR were allowed to predict total isoflavones and oligosaccharides using intact seeds with acceptable performance (R2p: 0.80 and 0.72), which were slightly better than the model obtained based on FT-IR data (R2p: 0.73 and 0.70). The results also demonstrate the possibility of using FT-NIR to predict individual types of evaluated components, denoted by acceptable performance values of prediction model (R2p) of over 0.70. In addition, the result of the testing model proved the model’s performance by obtaining a similar R2 and error to the calibration model.
Anthocyanins are an important micro-component that contributes to the quality factors and health benefits of black rice. Anthocyanins concentration and compositions differ among rice seeds depending on the varieties, growth conditions, and maturity level at harvesting. Chemical composition-based seeds inspection on a real-time, non-destructive, and accurate basis is essential to establish industries to optimize the cost and quality of the product. Therefore, this research aimed to evaluate the feasibility of near-infrared hyperspectral imaging (NIR-HSI) to predict the content of anthocyanins in black rice seeds, which will open up the possibility to develop a sorting machine based on rice micro-components. Images of thirty-two samples of black rice seeds, harvested in 2019 and 2020, were captured using the NIR-HSI system with a wavelength of 895–2504 nm. The spectral data extracted from the image were then synchronized with the rice anthocyanins reference value analyzed using high-performance liquid chromatography (HPLC). For comparison, the seed samples were ground into powder, which was also captured using the same NIR-HSI system to obtain the data and was then analyzed using the same method. The model performance of partial least square regression (PLSR) of the seed sample developed based on harvesting time, and mixed data revealed the model consistency with R2 over 0.85 for calibration datasets. The best prediction models for 2019, 2020, and mixed data were obtained by applying standard normal variate (SNV) pre-processing, indicated by the highest coefficient of determination (R2) of 0.85, 0.95, 0.90, and the lowest standard error of prediction (SEP) of 0.11, 0.17, and 0.16 mg/g, respectively. The obtained R2 and SEP values of the seed model were comparable to the result of powder of 0.92–0.95 and 0.09–0.15 mg/g, respectively. Additionally, the obtained beta coefficients from the developed model were used to generate seed chemical images for predicting anthocyanins in rice seed. The root mean square error (RMSE) value for seed prediction evaluation showed an acceptable result of 0.21 mg/g. This result exhibits the potential of NIR-HSI to be applied in a seed sorting machine based on the anthocyanins content.
21 April 2023 in Postharvest Biology and Technology
Ensuring the quality of fresh-cut vegetables is the greatest challenge for the food industry and is equally as important to consumers (and their health). Several investigations have proven the necessity of advanced technology for detecting foreign materials (FMs) in fresh-cut vegetables. In this study, the possibility of using near infrared spectral analysis as a potential technique was investigated to identify various types of FMs in seven common fresh-cut vegetables by selecting important wavebands. Various waveband selection methods, such as the weighted regression coefficient (WRC), variable importance in projection (VIP), sequential feature selection (SFS), successive projection algorithm (SPA), and interval PLS (iPLS), were used to investigate the optimal multispectral wavebands to classify the FMs and vegetables. The application of selected wavebands was further tested using NIR imaging, and the results showed good potentiality by identifying 99 out of 107 FMs. The results indicate the high applicability of the multispectral NIR imaging technique to detect FMs in fresh-cut vegetables for industrial application.
With technological developments, the resolution of the display systems is increasing, causing image data to increase. Several technologies are aiding in optimizing these data during transmission and storage while maintaining quality. Still, the internal data transmission for accessing the memory sub‐system during reading and writing cycles consumes significant power while requiring large memory for storage, which is inefficient, especially for portable displays. Hence, this work investigates the feasibility of reducing data through approximation for images in different formats and resolutions for human and computer vision based applications. Different image quality assessment metrics are utilized for performance evaluations with optimum image quality assessment selection according to application requirements. In addition, the feasibility analysis is conducted for three different applications as examples of computer vision. The experimental analysis highlights theoretical and industrial importance by showing that image data can be reduced from 25.0% to 62.5%, while satisfying requirements for HVS‐based and computer vision‐based applications.
For liquid crystal display‐based devices, the memory sub‐system and backlight consume a notable amount of energy, posing a critical concern, especially for portable devices. This work introduces an integrated display system (IDS) aimed at combining technologies for energy‐efficient memory usage and backlight power optimization, which have been addressed independently until now in the existing literature. Two modifications of approximated memory are proposed to find an optimal scheme for energy‐efficient memory usage as part of the proposed IDS schemes. Additionally, three distinct IDS schemes are proposed and compared to identify an optimum solution, ensuring energy efficiency maximization while maintaining image quality for each image. Experimental results demonstrate that 42.19% of energy consumption in memory access and 37.57% of the backlight power consumption can be reduced, while maintaining the image quality in terms of two different metrics.