Marco Pisco

Prof. Marco Pisco

University of Sannio, Optoelectronics Group - Department of Engineering
orcid

Research Focus & Metrics

Academic Career Length

22Years (2005-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
8 September 2016 in Light: Science & Applications
Verified
Journal Article
Open access
PDF file
Marco PiscoMarco Pisco
Marco Pisco
Francesco GaleottiFrancesco Galeotti
Francesco Galeotti
Giuseppe QueroGiuseppe Quero
Giuseppe Quero
GGGiorgio Grisci
Giorgio Grisci
AMAlberto Micco
Alberto Micco
Andrea CusanoAndrea Cusano
Andrea Cusano
This paper reports a simple and economical method for the fabrication of nanopatterned optical fiber nanotips. The proposed patterning approach relies on the use of the nanosphere lithography of the optical fiber end facet. Polystyrene (PS) nanospheres are initially self-assembled in a hexagonal array on the surface of water. The created pattern is then transferred onto an optical fiber tip (OFT). The PS monolayer colloidal crystal on the OFT is the basic building block that is used to obtain different periodic structures by applying further treatment to the fiber, such as metal coating, nanosphere size reduction and sphere removal. Ordered dielectric and metallo-dielectric sphere arrays, metallic nanoisland arrays and hole-patterned metallic films with feature sizes down to the submicron scale are achievable using this approach. Furthermore, the sizes and shapes of these periodic structures can be tailored by altering the fabrication conditions. The results indicate that the proposed self-assembly approach is a valuable route for the development of highly repeatable metallo-dielectric periodic patterns on OFTs with a high degree of order and low fabrication cost. The method can be easily extended to simultaneously produce multiple fibers, opening a new route to the development of fiber-optic nanoprobes. Finally, we demonstrate the effective application of the patterned OFTs as surface-enhanced Raman spectroscopy nanoprobes.

20 August 2020 in Sensors
Verified
Journal Article
Open access
PDF file
Marco PiscoMarco Pisco
Marco Pisco
Andrea CusanoAndrea Cusano
Andrea Cusano
This review presents an overview of the “lab-on-fiber technology” vision and the main milestones set in the technological roadmap to achieve the ultimate objective of developing flexible, multifunctional plug and play fiber-optic platforms designed for specific applications. The main achievements, obtained with nanofabrication strategies for unconventional substrates, such as optical fibers, are discussed here. The perspectives and challenges that lie ahead are highlighted with a special focus on full spatial control at the nanoscale and high-throughput production scenarios. The rapid progress in the fabrication stage has opened new avenues toward the development of multifunctional plug and play platforms, discussed here with particular emphasis on new functionalities and unparalleled figures of merit, to demonstrate the potential of this powerful technology in many strategic application scenarios. The paper also analyses the benefits obtained from merging lab-on-fiber (LOF) technology objectives with the emerging field of optomechanics, especially at the microscale and the nanoscale. We illustrate the main advances at the fabrication level, describe the main achievements in terms of functionalities and performance, and highlight future directions and related milestones. All achievements reviewed and discussed clearly suggest that LOF technology is much more than a simple vision and could play a central role not only in scenarios related to diagnostics and monitoring but also in the Information and Communication Technology (ICT) field, where optical fibers have already yielded remarkable results.

18 May 2012 in Journal of Lightwave Technology
Verified
Journal Article
Closed access
Massimo MocciaMassimo Moccia
Massimo Moccia
Marco ConsalesMarco Consales
Marco Consales
Agostino IadiciccoAgostino Iadicicco
Agostino Iadicicco
Marco PiscoMarco Pisco
Marco Pisco
ACAntonello Cutolo
Antonello Cutolo
ACAndrea Cusano
Andrea Cusano
In this paper, we report on recent experimental results obtained with fiber-Bragg-grating (FBG) hydrophones for underwater acoustic detection. The optical hydrophones under investigation consist of FBGs coated with ring-shaped polymers of different size and mechanical properties. The coating materials were selected and designed in order to provide mechanical amplification, via judicious choice of their acousto-mechanical properties and by exploiting selected resonances occurring in different frequency ranges. Our underwater acoustic measurements, carried out within the range 4–35 kHz, reveal the resonant behavior of these optical hydrophones, as well as its dependence on the coating size and type of material. These experimental data are also in good agreement with our previously published numerical results. By comparison with bare (i.e., uncoated) FBGs, responsivity enhancements of up to three orders of magnitude were found, demonstrating the effectiveness of polymeric coatings in tailoring the acoustic response of FBG-based hydrophones.

25 February 2018 in Sensors
Verified
Journal Article
Open access
PDF file
Giuseppe QueroGiuseppe Quero
Giuseppe Quero
GZGianluigi Zito
Gianluigi Zito
SMStefano Managò
Stefano Managò
Francesco GaleottiFrancesco Galeotti
Francesco Galeotti
Marco PiscoMarco Pisco
Marco Pisco
Andrea CusanoAndrea Cusano
Andrea Cusano
In this paper we report on the engineering of repeatable surface enhanced Raman scattering (SERS) optical fiber sensor devices (optrodes), as realized through nanosphere lithography. The Lab-on-Fiber SERS optrode consists of polystyrene nanospheres in a close-packed arrays configuration covered by a thin film of gold on the optical fiber tip. The SERS surfaces were fabricated by using a nanosphere lithography approach that is already demonstrated as able to produce highly repeatable patterns on the fiber tip. In order to engineer and optimize the SERS probes, we first evaluated and compared the SERS performances in terms of Enhancement Factor (EF) pertaining to different patterns with different nanosphere diameters and gold thicknesses. To this aim, the EF of SERS surfaces with a pitch of 500, 750 and 1000 nm, and gold films of 20, 30 and 40 nm have been retrieved, adopting the SERS signal of a monolayer of biphenyl-4-thiol (BPT) as a reliable benchmark. The analysis allowed us to identify of the most promising SERS platform: for the samples with nanospheres diameter of 500 nm and gold thickness of 30 nm, we measured values of EF of 4 × 105, which is comparable with state-of-the-art SERS EF achievable with highly performing colloidal gold nanoparticles. The reproducibility of the SERS enhancement was thoroughly evaluated. In particular, the SERS intensity revealed intra-sample (i.e., between different spatial regions of a selected substrate) and inter-sample (i.e., between regions of different substrates) repeatability, with a relative standard deviation lower than 9 and 15%, respectively. Finally, in order to determine the most suitable optical fiber probe, in terms of excitation/collection efficiency and Raman background, we selected several commercially available optical fibers and tested them with a BPT solution used as benchmark. A fiber probe with a pure silica core of 200 µm diameter and high numerical aperture (i.e., 0.5) was found to be the most promising fiber platform, providing the best trade-off between high excitation/collection efficiency and low background. This work, thus, poses the basis for realizing reproducible and engineered Lab-on-Fiber SERS optrodes for in-situ trace detection directed toward highly advanced in vivo sensing.

5 November 2018 in Nanoscale
Verified
Journal Article
Closed access
PDF file
Francesco GaleottiFrancesco Galeotti
Francesco Galeotti
Marco PiscoMarco Pisco
Marco Pisco
Andrea CusanoAndrea Cusano
Andrea Cusano
Self-assembly offers a unique resource for the preparation of discrete structures at the nano- and microscale, which are either not accessible by other fabrication techniques or require highly expensive and technologically demanding processes. The possibility of obtaining spontaneous organization of separated components, whether they are molecules, polymers, nano- or micro-objects, into a larger functional unit, enables the development of ready-to-use plug and play devices and components at lower costs. Expanding the applicability of self-assembly approaches at the nanoscale to non-conventional substrates would open up new avenues towards multifunctional platforms customized for specific applications. Recently, the combination of the amazing morphological and optical features of self-assembled patterns with the intrinsic properties of optical fibers to conduct light to a remote location has demonstrated the potentiality to open up new intriguing scenarios featuring unprecedented functionalities and performances. The integration of advanced materials and structures at the nanoscale with optical fiber substrates is the idea behind the so-called lab-on-fiber technology, which is an emerging technology at the forefront of nanophotonics and nanotechnology research. Self-assembly processes can have a key role in implementing cost-effective solutions suitable for the mass production of technologically advanced platforms based on optical fibers towards their real market exploitation. Novel lab-on-fiber optrodes would arise from the sustainable integration of functional materials at the nano- and microscale onto optical fiber substrates. Such devices are able to be easily integrated in hypodermic needles and catheters for in vivo theranostics and point-of-care diagnostics, opening up new frontiers in multidisciplinary technological development to be exploited in life science applications. This work is conceived to provide an overview of the latest strategies, based on self-assembly processes, which have been implemented for the realization of lab-on-fiber optrodes with particular emphasis on the perspectives and challenges that lie ahead. We discuss the main fabrication techniques and strategies aimed at developing new multifunctional optical fiber nanoprobes and their application in real scenarios. Finally, we highlight some of the other self-assembly processes that have not yet been applied to optical fiber sensors, but have the potentiality to be exploited in the fabrication of future lab-on-fiber devices.

13 October 2012 in Photonic Sensors
Verified
Journal Article
Open access
PDF file
Marco ConsalesMarco Consales
Marco Consales
Marco PiscoMarco Pisco
Marco Pisco
Andrea CusanoAndrea Cusano
Andrea Cusano
The “lab-on-fiber” concept envisions novel and highly functionalized technological platforms completely integrated in a single optical fiber that would allow the development of advanced devices, components and sub-systems to be incorporated in modern optical systems for communication and sensing applications. The realization of integrated optical fiber devices requires that several structures and materials at nano- and micro-scale are constructed, embedded and connected all together to provide the necessary physical connections and light-matter interactions. This paper reviews the strategies, the main achievements and related devices in the lab-on-fiber roadmap discussing perspectives and challenges that lie ahead.