Measurement technique for the study of very thin lubrication films down to one nanometer in a point contact between a steel ball and a transparent disc is used to explore the relationship between central and minimum film thickness and rolling speed at the interface between elastohydrodynamic and boundary lubrication for a series of lubricating fluids. This technique based on the colorimetric interferometry combines powerful film thickness mapping capabilities with high accuracy. It was confirmed that both hexadecane and mineral base oil obey the linear relationship between log central and minimum film thickness and log rolling speed predicted by elastohydrodynamic theory down to approximately one nanometer. Conversely, squalane and additive-treated mineral base oil showed film thickness enhancement at slow speeds caused by boundary layers formation within the lubricant film. Obtained experimental data was used for the determination of pressure-viscosity coefficients of test fluids. The measurement technique also enabled us to produce information about the influence of boundary layers on film thickness shape.
1 August 2008 in Composites Part A: Applied Science and Manufacturing
The assessment of human tissue properties by objective and quantitative devices is very important to improve the understanding of its mechanical behaviour. The aim of this paper is to present a non contact method to measure the mechanical properties of human skin in vivo. A complete non contact device using an air flow system has been developed. Validation and assessment of the method have been performed on inert visco-elastic material. An in vivo study on the forearm of two groups of healthy women aged of 23.2±1.6 and 60.4±2.4 has been performed. Main parameters assessed are presented and a first interpretation to evaluate the reduced Young's modulus is proposed. Significant differences between the main parameters of the curve are shown with ageing. As tests were performed with different loads, the influence of the stress is also observed. We found a reduced Young's modulus with an air flow force of 10 mN of 14.38±3.61 kPa for the youngest group and 6.20±1.45 kPa for the oldest group. These values agree with other studies using classical or dynamic indentation. Non contact test using the developed device gives convincing results.