This research aimed to investigate the occurrence and lithogeochemical composition of iron ore in the Ngororero District of Rwanda, with a specific focus on assessing its suitability as a raw material for iron and steel production. The objective was to determine the elemental composition, mineral species, and morphology of the iron ore samples collected from the study area. Eleven samples were collected and analyzed using Inductively Coupled Plasma-Mass Spectrometry (ICP-MS), X-ray diffractogram (XRD), and Optical Light Microscopy. The study shows that Ngororero iron ore is a medium-grade hematite (Fe2O3) ore with iron content ranging from 58.3 % to 65.8 %. Importantly, it contains minimal impurities (less than 3.7 % SiO2 and less than 0.4 % Al2O3) and low levels of detrimental elements (P less than 0.02 % and S less than 0.19 %). While the sulfur (S) content slightly exceeds standard limits, the phosphorus (P) content falls within the acceptable range for commercial iron ores. These findings, marking the first report of iron ore occurrence in the Ngororero District, have significant implications for the potential exploitation of Ngororero iron ore as a valuable raw material in iron and steel production and its suitability for industrial applications. To confirm its economic potential and assess its viability for iron and steel production in Rwanda, the study recommends that additional thorough exploration activities be conducted in this area using both geology and geophysical investigation as well as exploration drilling for iron ore reserve estimation in the study area.
A hot spring is a hot water source that naturally occurs on the surface of the Earth from underground; it is typically heated by subterranean volcanic activity and the local underground geothermal gradient. There are four main hot springs in Rwanda, such as: Kalisimbi, Bugarama, Kinigi, and Nyamyumba, formerly named Gisenyi hot springs. It is often believed that soaking in a hot spring is a great way to naturally detox human skin. This research focuses on the geochemical analysis of Nyamyumba hot springs, located near the fresh water supply of Lake Kivu, with the purpose of understanding its healing capacity and safety. The Nyamyumba hot springs are located in the western branch of the East African Rift System, near the Virunga volcanic complex, which explains the rising and heating mechanism of the water. The concentrations of sulfate, iron, ammonia, silica, and phosphate, and the conductivity, alkalinity, and salinity of the water were measured using standard procedures. The results showed that the hot spring water has higher concentrations of chemicals compared to the Lake Kivu water, and the geochemistry of these hot springs may be associated with rock dissolution by hot water. The measured parameters were compared with World Health Organization (WHO) standards for recreational waters, and it has been identified that the Nyamyumba hot springs are safe to use for swimming and therapeutic activities.
Rwanda hosts million tons of peat deposits and that of western province is of great importance as it close to Kivu Lake. The discovery of methane gas in Kivu Lake has attracted investors in methane gas utilization as source of power supply and Compressed Natural Gas (CNG). Researchers identified Kivu Lake and adjacent area as an area of interest for hydrocarbon exploration. However, organic geochemical prospecting for hydrocarbon and energy content assessment is inadequate for the identified areas. The study aimed at determining the organic geochemistry of peat deposits in southwest, Rwanda. Forty (40) subsurface peat samples (1 to 10 m depth) were collected, air-dried and pulverized and screened. Five (5) samples with high organic matter content were subjected to biomarkers analysis using GC-GCMS. The n-alkanes distribution comprised mainly n-C11 to n-C 37. The Pr/Ph ratios (3.3-10.4, the waxiness index (0.09-0.87), CPI (3.6-7.8), OEP (3.5-6.0), C29 steranes (63.0–100.0%), C28 (0.0–28.0%), C27 (0.0–18.0%) and C27/ C29 sterane ratios (0.0-0.28). The ββ/ (ββ + αα) and 20S/ (20S + 20R) are 0.5 and 0.46 respectively. The C30 -moretane/ C30 -hopane ratios ranged from 1.56 to 2.42, while the oleanane index ranged from 0.07 to 0.26. The Ts/ (Ts + Tm) ratios ranged from 0.13 to 1.05. The dominance of C-29 sterols and C29/C27 sterane ratio which ranged from 3.5 to 100 indicating derivation from terrigenous higher plant material. The Pr/Ph ratio (>3) reflect the oxic to sub-oxic environmental condition during peat deposition. The peat deposits in Western Province, Rwanda are very rich in organic matter of mainly terrestrial precursor deposited in dry and cold climate.
The accumulation of heavy metals in rivers’ sediments near industrial wastes and mining activities has been a serious issue in developing countries including Rwanda and it has caused different environmental impacts on aquatic and terrestrial lives. Environmental studies have reported heavy metals pollution (lead, manganese, copper, zinc, nickel, iron, and cadmium) in major Rwandese rivers such as Mpazi, Rusine, and Nyabugogo. The increase in heavy metal concentrations in the environment results in abnormal enrichment, which in turn, affects the surrounding environment. This study aimed to investigate the heavy metals in Nyabarongo sediments, Mageragere sector using both X-ray fluorescence (XRF) and Atomic Absorption Spectrometer (AAS) instruments. Sediments samples were collected systematically on four sampling stations and the results showed that the Cadmium (Cd), Lead (Pb), and Manganese (Mn) concentrations among the investigated heavy metals are above the Rwanda Standard Board (RSB) and World Health Organization (WHO) guidelines for soils and sediments, meaning that those metals are the measure pollutants in the sediments of Nyabarongo River and the study has recommended the people around the river to reinforce the erosion control measures and not to use Nyabarongo water for domestic use and animal farming activities because of the concentration of heavy metals it contains that are toxic to animals, plants and micro-organisms. Keywords: Heavy metals; Nyabarongo River; Pollution; River sediments; World Health Organization (WHO).
Mining activities play a vital role in the sustainable development of many countries and equally act as a source of environmental pollution and land degradation if they are not well managed. This current study investigated the spatial distribution and contamination assessment of heavy metals at the Gatumba mining site in western Rwanda, a region historically impacted by artisanal and small-scale mining. Soil, water and stream sediment samples were analysed for concentrations of lead, arsenic, cadmium, chromium, nickel, zinc and other different metals using ICP-OES, XRD and S2 PUMA XRF. Spatial interpolation methods (GIS-based inverse distance weighting) were employed to generate contamination maps, while risk indices such as the geo-accumulation index and contamination factor were applied to evaluate contamination. This study analysed 10 soil, 11 water, and 21 stream sediment samples. Pb concentrations in groundwater (0.03 ppm) exceeded WHO guidelines by 3-fold, while Cr reached 0.46 ppm in processing channels (9.2× WHO limits). Igeo values indicated moderate As contamination near active mining areas. It has been identified that the concentrations of lead in water and, more importantly, in groundwater springs utilised by local people in their daily activities are higher than World Health Organization criteria for drinking water. This study highlighted an urgent need to develop monitoring, mitigation measures, and proper enforcement in order to reduce mining pollution in the area. It equally highlighted the need for further studies employing inductive coupled plasma mass spectrometry for better detection of heavy and trace metals.