Youventharan Duraisamy

Dr. Youventharan Duraisamy

Universiti Malaysia Pahang
orcid

Research Focus & Metrics

Academic Career Length

20Years (2007-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
31 May 2021 in Materials
Verified
Journal Article
Open access
PDF file
RORokiah Othman
Rokiah Othman
Ramadhansyah Putra JayaRamadhansyah Putra Jaya
Ramadhansyah Putra Jaya
KMKhairunisa Muthusamy
Khairunisa Muthusamy
MSMohdArif Sulaiman
MohdArif Sulaiman
Youventharan DuraisamyYouventharan Duraisamy
Youventharan Duraisamy
Andrei Victor SanduAndrei Victor Sandu
Andrei Victor Sandu
This study aims to obtain the relationship between density and compressive strength of foamed concrete. Foamed concrete is a preferred building material due to the low density of its concrete. In foamed concrete, the compressive strength reduces with decreasing density. Generally, a denser foamed concrete produces higher compressive strength and lower volume of voids. In the present study, the tests were carried out in stages in order to investigate the effect of sand–cement ratio, water to cement ratio, foam dosage, and dilution ratio on workability, density, and compressive strength of the control foamed concrete specimen. Next, the test obtained the optimum content of processed spent bleaching earth (PSBE) as partial cement replacement in the foamed concrete. Based on the experimental results, the use of 1:1.5 cement to sand ratio for the mortar mix specified the best performance for density, workability, and 28-day compressive strength. Increasing the sand to cement ratio increased the density and compressive strength of the mortar specimen. In addition, in the production of control foamed concrete, increasing the foam dosage reduced the density and compressive strength of the control specimen. Similarly with the dilution ratio, the compressive strength of the control foamed concrete decreased with an increasing dilution ratio. The employment of PSBE significantly influenced the density and compressive strength of the foamed concrete. An increase in the percentage of PSBE reduced the density of the foamed concrete. The compressive strength of the foamed concrete that incorporated PSBE increased with increasing PSBE content up to 30% PSBE. In conclusion, the compressive strength of foamed concrete depends on its density. It was revealed that the use of 30% PSBE as a replacement for cement meets the desired density of 1600 kg/m3, with stability and consistency in workability, and it increases the compressive strength dramatically from 10 to 23 MPa as compared to the control specimen. Thus, it demonstrated that the positive effect of incorporation of PSBE in foamed concrete is linked to the pozzolanic effect whereby more calcium silicate hydrate (CSH) produces denser foamed concrete, which leads to higher strength, and it is less pore connected. In addition, the regression analysis shows strong correlation between density and compressive strength of the foamed concrete due to the R2 being closer to one. Thus, production of foamed concrete incorporating 30% PSBE might have potential for sustainable building materials.

1 October 2007 in American Journal of Applied Sciences
Verified
Journal Article
Open access
PDF file
Youventharan DuraisamyYouventharan Duraisamy
Youventharan Duraisamy
BHBujang B.K. Huat
Bujang B.K. Huat
AAAzlan A. Aziz
Azlan A. Aziz
Engineering Properties and Compressibility Behavior of Tropical Peat Soil

10 June 2009 in Geotechnical and Geological Engineering
Verified
Journal Article
Closed access
PDF file
Youventharan DuraisamyYouventharan Duraisamy
Youventharan Duraisamy
BHBujang B. K. Huat
Bujang B. K. Huat
RMRatnasamy Muniandy
Ratnasamy Muniandy

14 March 2023 in Sustainability
Verified
Journal Article
Open access
PDF file
RORokiah Othman
Rokiah Othman
Ramadhansyah Putra JayaRamadhansyah Putra Jaya
Ramadhansyah Putra Jaya
Youventharan DuraisamyYouventharan Duraisamy
Youventharan Duraisamy
MSMohd Arif Sulaiman
Mohd Arif Sulaiman
Beng Wei ChongBeng Wei Chong
Beng Wei Chong
Ali GhamariAli Ghamari
Ali Ghamari
Foamed concrete is a lightweight construction material that has gained popularity due to its excellent thermal and acoustic insulation properties. Foamed concrete production involves using cement as a binding agent, which results in a high carbon footprint. In response to sustainable development goals (SDG), there has been a growing interest in exploring alternative materials that can replace cement to improve energy efficiency, climate change, resource efficiency, and overall improvement of foamed concrete properties. Several tons of waste generated annually from industry, agriculture, and quarries are dumped into landfills and cause environmental impacts. Nevertheless, the efficiency of this waste presents an interesting question and there is limited knowledge of its use in foamed concrete. Hence, a review study is needed to evaluate the efficiency of different waste materials that could be used to replace cement in foamed concrete production. The objective of this research is to summarize the efficiency of industrial waste (IW) as a pozzolan alternative (PA) for cement replacement in foamed concrete (FC) production. This study aims to evaluate the chemical, physical, and pozzolanic reactions of selected IW and compare them to cement and selected pozzolans to determine the effect of efficient IW on the compressive strength and durability of FC. This research evaluated the efficiency of IW in PA by characterizing their chemical, physical, and pozzolanic reactions. The selected IW was studied and compared to cement and selected pozzolans using XRF and XRD analyses. This study also performed the Frattini test to determine the strength activity index (SAI) of efficient IW. The efficiency of IW in PA was evaluated by comparing the SAI of efficient IW to the minimum 75% required by BS3892. The compressive strength and durability of FC with efficient IW were determined by evaluating the microstructure of the hardened paste of FC using capillary void analysis. The study found that efficient IW, which was classified as siliceous pozzolan type F (ASTMC618-SAF > 70%), rich in amorphous silica and a high Blaine specific area, can replace cement in FC production. The XRF and XRD results showed that the most crystalline components obtained in the IW are SiO2, Al2O3, CaCO3, and Fe2O3. The efficient IW produced more calcium silicate hydrate (CSH) and denser FC, making it stronger, with fewer voids and higher resistance to water absorption. The Frattini test showed that the SAI of efficient IW is greater than the minimum 75% required by BS3892. Incorporating efficient IW as cement replacement in FC produced higher compressive strength and improved the durability of FC. The novelty of this research is in the evaluation of efficient IW as a replacement material for cement in FC production. This study shows that efficient IW can promote the use of waste materials, reduce CO2 emissions, conserve energy and resources, and improve the properties of FC. This study’s findings can be used by construction industry players to support sustainable development goals by reducing the use of cement and promoting the use of waste materials as a replacement material for cement.

1 February 2021 in IOP Conference Series: Earth and Environmental Science
Verified
Conference Paper
Open access
PDF file
Youventharan DuraisamyYouventharan Duraisamy
Youventharan Duraisamy
PRP J Ramandhansyah
P J Ramandhansyah
KJK M Jeevithan
K M Jeevithan
ORO Rokiah
O Rokiah
SAS Mohd Arif
S Mohd Arif
HYH Yaacob
H Yaacob
Concrete debris and bottom ash has been identified as the potential materials to be used in construction industry. This would certainly reduce wastage produced from construction and demolition (C&D) activities and bottom ash from the power plant. However, the concrete debris waste and the bottom ash are been neither tested nor proven to be feasible in the construction of railway track. This paper will discuss the potential usage of concrete debris collected from destruction site and also the bottom ash waste from Coal Energy Power Plant. Currently, neither concrete debris nor bottom ash is used in railway construction. The main objective of this study is to analyse the engineering properties of bottom ash and concrete debris along with the conventional ballast to verify whether the traditional material can be replaced or otherwise. Experiments such as the sieve analysis test, Los Angeles abrasion test, aggregate impact value test and the aggregate crushing value test were conducted to measure the properties. The engineering properties tested in this research are the hardness, toughness and resistance towards impact and crushing of ballast. In terms of gradation, particle size distribution curve was plotted and compared in this research. It was found that the mixture of concrete debris and track ballast in the proportion of 50:50 each has brought some improvement to the properties and tend to behave close to the existing track ballast. The mixture of concrete debris and track ballast also shows that its crushing resistance is better than the existing track ballast. In conclusion, both the waste materials used in this research is highly potential to partially complement traditional material of track ballast.

1 April 2007 in American Journal of Environmental Sciences
Verified
Journal Article
Open access
PDF file
Youventharan DuraisamyYouventharan Duraisamy
Youventharan Duraisamy
BHBujang B.K. Huat
Bujang B.K. Huat
AAAzlan A. Aziz
Azlan A. Aziz
Methods of Utilizing Tropical Peat Land for Housing Scheme