The paper focuses on the study of a semi-activated system, based on a combination of two movements of forced pitching and free-heaving motion. Therefore, quantifying with accuracy the hydrodynamic forces applied on the hydrofoil seems to be crucial. This is investigated throughout a numerical analysis of the hydrofoil dynamics. The deformable structure is oscillating in a low-Reynolds number flow. In this study, a hydrofoil animated by a combined forced pitching and heaving movements is considered. Various materials of the hydrofoil structure are studied, from the rigid material to a more flexible one. A partitioned implicit coupling approach is applied in order to consider the Fluid-Structure Interaction (FSI) effects, while the Navier–Stokes equations are solved using the Arbitrary Lagrangian–Eulerian (ALE) method. Both the viscous incompressible Navier–Stokes equations and the elasticity equation are solved using finite volume method. The study is based on the analysis of the hydrodynamic loads acting on the structure. Therefore, the induced dynamics and the power coefficient of the structure are investigated. It is shown that the flexibility of the hydrofoil has an effect on its hydrodynamic behavior. Indeed it increases the load fluctuations and the horizontal mean force component. Furthermore, the unsteady vortices around the hydrofoil are highly impacted by its deformations. Finally, the structure deformations mostly improve the device energy efficiency.
The study presents a numerical investigation of two-dimensional partly flexible plate dynamics. The structure is immersed in a turbulent fluid flow with a Reynolds number based on its chord of 104. The plate is animated by a forced pitching movement. The flexibility effects of the plate's leading edge are analyzed, as it deforms under the hydrodynamic loads. The fluid–structure interaction effects are considered by solving a coupled problem using a strong implicit procedure. Both fluid and solid dynamics are solved. The numerical results of the present study are validated with experimental ones with a good agreement between both approaches for the lower reduced frequencies. Differences are observable for high frequency that could be imputable to the three-dimensional aspects of the experiment. It has been shown that with an appropriate choice of the rigidity of the structure, it is possible to mitigate the unsteady load fluctuations without affecting the load mean values too much. Indeed, at low pitching frequency (drag mode), the leading-edge vortex generation is impacted by the flexible leading edge. As a result, it tends to decrease the hydrodynamic force fluctuation amplitude without really impacting the mean force value. Conversely, at high pitching frequency (propulsive mode), it was found that a flexible leading edge tends to increase both the magnitudes of the hydrodynamic forces and their mean values. Finally, it is shown that the load fluctuation mitigation, or amplification, is maximum for a specific flexibility value depending on the pitching frequency.
15 December 2021 in Canadian Journal of Anesthesia/Journal canadien d'anesthésie