This paper aims to investigate the reconfigurations of rotor flux barriers for a five-phase Permanent Magnet Assisted Synchronous Reluctance Machine (PMASynRM). To precisely study the performance of the proposed configurations, a conventional PMASynRM with double-layer flux barriers is included in the study. Since the novel rotor schemes consume the same amount of rare-earth magnets, steel sheet materials, and copper wire, resulting in no extra manufacturing costs, the optimal reconfiguration should be determined, providing developed electromagnetic characteristics. Thus, all the proposed models are designed and analyzed under the same condition. The Lumped Parameter Model (LPM) is exported to the Finite Element Method (FEM) for precise analysis to reach developed torque and lower values of torque ripple. Based on the FEM results the model presenting the lowest torque fluctuations is selected as the optimal model and dynamically investigated. According to the results, in comparison with the conventional model, the introduced rotor designs provide a much lower value of torque fluctuations with a desirable amount of electromagnetic torque and power. In addition, the optimal model presents high values of power factor and efficiency, making it a vital alternative for low-torque ripple high-speed operations with no extra cost to the implementation process.
This paper presents a comparative analysis on the torque of a synchronous reluctance machine (SyncRM) with interior mounted permanent magnets (PM-SyncRM) using 2D finite elements method. The proposed models are the combination of SyncRM and interior mounted PM (IPM) machine in order to achieve simple rotor and stator structure and high electromechanical performance. Models consist of variable amounts of PMs. A reference SyncRM with the same rotor structure is compared with the proposed PM-SyncRMs in order to demonstrate the advantages of the PM utilizations in SyncRM. The proposed PM models are compared in order to realize the best performance and characteristics, which will be discussed in details, later.
Recent developments in electrical machine industries have made investigators to explore new topologies of electrical machines including Synchronous Reluctance Machine (SyncRM). However, Permanent Magnet Assisted Synchronous Reluctance Machine (PMSyncRM or PMASyncRM) which is originated from SyncRM and PMs are inserted in flux barriers of rotor is also introduced for improving the magnetic performance of SyncRM. Thus, the amount, magnetic direction and material of PM segments should be optimized based on the operational requirement. In order to enhance power density of the machine, 2D Finite Element Method (FEM) is applied to six PM layouts considering three different types of PM materials in two magnetic directions and results are presented in this paper. Based on the results PM-SyncRM with two NdFeB PMs per pole aligned with flux direction in rotor shows the overall enhancement in power (torque) density and torque ripple reduction.
Four outer rotor surface-mounted permanent magnet synchronous machines (SMPSM), supplied by a seven-phase drive system, are proposed in this study, considering different q (number of stator slot per phase per pole ratio) to achieve a satisfying value of electromagnetic torque and Back-Electromotive Force (Back-EMF) with lower torque pulsation. Accordingly, the proposed configurations are investigated, and results are comparatively reported. Thus based on the results, the best-performing configuration, the candidate model, which presents the lowest torque pulsation with a desirable value of Tavg and Back-EMF is selected. In order to demonstrate the advantages of this candidate model, an optimization analysis is performed using 2D Finite Element Analysis (FEA). The resultant values of the variables are applied, designing three optimized models. Performance results of the optimized models demonstrate that TCog reduced noticeably and TRipple declined below 5%. The Artemis Drive-Cycles analysis results are also included for the best-optimized model, considering E-Motorcycle requirements and properties for urban, rural, and motorway driving conditions. Accordingly, in terms of In-Wheel application of the optimized machine, high torque/power density along with high values of PF and efficient performance are provided for E-Motorcycle application.
20 November 2024 in IET Electric Power Applications
The aim of this paper is to design and Finite Element Analysis (FEA) of a novel rotor topology for a permanent magnet synchronous reluctance machine. According to the advantages and drawbacks of the PMSyncRM and the SPMSM, a conventional PMSyncRM rotor design combined with sur-face-mounted magnets is introduced as the SPMSyncRM. The surface-PM arc size is investigated, so that it is considered as multiplication of an integer coefficient and the angle between two adjacent slots of the stator. The analysis involves simulation of the electromagnetic characteristics and the numerical model of each structure using finite element method. Each E-Magnetic character is calculated for a better understanding of the benefits of the SPMSyncRM. Applying 2D FEA, the optimised surface-PM arc size is calculated and the static and dynamic operational behaviour of the SPMSyncRM is simulated. Moreover, short circuit analysis is performed to study the demagnetisation of magnets. All results are reported comparatively considering a conventional PMSyncRM, so that the proposed SPM-SyncRM topology presents high torque-power density, lower values of cogging torque, higher values of power factor and efficiency, better static and dynamic performance, and robustness towards demagnetisation.