Anureet Kaur

Ms. Anureet Kaur

School of Engineering and Materials Science, Queen Mary University of London

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 October 2024 in Communications Materials
Verified
Journal Article
Open access
PDF file
AKAnureet Kaur
Anureet Kaur
MFMeet M. Fefar
Meet M. Fefar
TGThomas Griggs
Thomas Griggs
KAKeizo Akutagawa
Keizo Akutagawa
BCBiqiong Chen
Biqiong Chen
James J.C. BusfieldJames J.C. Busfield
James J.C. Busfield
Traditionally, sulfur-cured natural rubber compounds exhibit limited recyclability due to a significant drop in mechanical performance after reprocessing. Maintaining physical and chemical properties after recycling of a cross-linked polymer is an essential requirement for the global rubber industry to become more sustainable. Here, we demonstrate that tuning the curing process to favour a reversible cross-linked network based on disulfide and polysulfide bonds enables recyclability. We use a sulfur-based vulcanization system optimized with copper (II) methacrylate at concentrations of 2.47, 4.94, and 9.89 phr to control disulfide metathesis at low temperatures and enhance recyclability. Mechanical characterization identifies 2.47 phr as optimal for maintaining mechanical properties after initial moulding and full recovery after recycling. Additionally, we demonstrate that copper (II) methacrylate can be incorporated into existing rubber waste streams to promote recyclability.

29 September 2021 in Polymers
Verified
Journal Article
Open access
PDF file
AKAnureet Kaur
Anureet Kaur
JGJulien E. Gautrot
Julien E. Gautrot
GCGabriel Cavalli
Gabriel Cavalli
DWDouglas Watson
Douglas Watson
ABAlan Bickley
Alan Bickley
James J.C. BusfieldJames J.C. Busfield
James J.C. Busfield
The introduction of dynamic bonds capable of mediating self-healing in a fully cross-linked polychloroprene network can only occur if the reversible moieties are carried by the cross-linker itself or within the main polymer backbone. Conventional cross-linking is not suitable for such a purpose. In the present work, a method to develop a self-healable and recyclable polychloroprene rubber is presented. Dynamic disulfide bonds are introduced as part of the structure of a crosslinker (liquid polysulfide polymer, Thiokol LP3) coupled to the polymer backbone via thermally initiated thiol-ene reaction. The curing and kinetic parameters were determined by isothermal differential scanning calorimetry and by moving die rheometer analysis; tensile testing was carried to compare the tensile strength of cured compound, healed compounds and recycled compounds, while chemical analysis was conducted by surface X-ray Photoelectron Spectroscopy. Three formulations with increasing concentrations of Thiokol LP-3 were studied (2, 4, 6 phr), reaching a maximum ultimate tensile strength of 22.4 MPa and ultimate tensile strain of 16.2 with 2 phr of Thiokol LP-3, 11.7 MPa and 10.7 strain with 4 phr and 5.6 MPa and 7.3 strain with 6 phr. The best healing efficiencies were obtained after 24 h of healing at 80 °C, increasing with the concentration of Thiokol LP-3, reaching maximum values of 4.5% 4.4% 13.4% with 2 phr, 4 phr and 6 phr, respectively, while the highest recycling efficiency was obtained with 4 phr of Thiokol LP-3, reaching 11.2%.

4 August 2023 in RSC Advances
Verified
Journal Article
Open access
PDF file
AKAnureet Kaur
Anureet Kaur
JGJulien E. Gautrot
Julien E. Gautrot
KAKeizo Akutagawa
Keizo Akutagawa
DWDouglas Watson
Douglas Watson
ABAlan Bickley
Alan Bickley
James J.C. BusfieldJames J.C. Busfield
James J.C. Busfield
This report presents an evaluation of thiyl radical-induced cis/trans isomerism in double bond-containing elastomers, such as natural, polychloroprene, and polybutadiene rubbers.

13 December 2025 in Polymers
Verified
Journal Article
Open access
PDF file
AKAnureet Kaur
Anureet Kaur
MTMaria Tucker
Maria Tucker
KAKeizo Akutagawa
Keizo Akutagawa
BCBiqiong Chen
Biqiong Chen
James J.C. BusfieldJames J.C. Busfield
James J.C. Busfield
This study explores a disulfide-selective cross-linking strategy for natural rubber (NR) to formulate elastomeric materials with engineering-relevant mechanical properties. A disulfide-containing bismaleimide (BIS) cross-linker was synthesized from cystamine and maleic anhydride and compounded with NR. Three formulations were prepared: control (no inhibitor), CuCl2-based, and copper(II) methacrylate (CuMA) based compounds, with BIS concentrations ranging from 3.55 to 8.88 phr. Rheological and mechanical testing revealed that CuCl2 formulations suffered from molecular degradation, poor thermal stability, and mechanical brittleness due to oxidative reactions in the absence of antioxidants. In contrast, CuMA-based compounds exhibited intermediate molecular weights prior to curing, stable thermal behavior, and improved mechanical properties, including enhanced torque and tensile strength, indicating effective cross-linking and partial recyclability. The control formulations also performed reasonably well but did not match the mechanical strength of conventional sulfur-vulcanized NR. The results demonstrate that metal coordination, particularly with CuMA, can modulate disulfide metathesis kinetics and offer a pathway to thermally triggered network rearrangement. Overall, CuMA emerges as a promising candidate for developing high-performance, recyclable rubber materials, while CuCl2 requires further stabilization strategies. This work establishes a baseline for future recyclability studies and advances the design of dynamic covalent networks in elastomers.