Yeu-Torng Yau

Prof. Yeu-Torng Yau

National Chin-Yi University of Technology
+1
orcid

Research Focus & Metrics

Academic Career Length

21Years (2006-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
9 January 2009 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
KHK. I. Hwu
K. I. Hwu
Yeu-Torng YauYeu-Torng Yau
Yeu-Torng Yau
In this paper, a voltage-boosting converter, named KY converter (i.e., 1-plus-D converter), is presented. Unlike the traditional nonisolated boost converter, this converter possesses fast load transient responses, which is similar to the buck converter with synchronous rectification. In addition, it possesses nonpulsating output current, thereby not only decreasing the current stress on the output capacitor but also reducing the output voltage ripple. Besides, 1-plus-2D and 2-plus-D converters, derived from the KY converter, are presented based on the same structure but different pulsewidth-modulation control strategies. Above all, the main difference between the KY converter and its derivatives is that the latter ones possess higher output voltages than the former one under the same duty cycle. A detailed description of the KY converter and its derivatives is presented along with some simulated and experimental results.

10 July 2014 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
KHK. I. Hwu
K. I. Hwu
WJW. Z. Jiang
W. Z. Jiang
Yeu-Torng YauYeu-Torng Yau
Yeu-Torng Yau
In this paper, an ultrahigh step-down converter is presented, which combines one coupled inductor and one energy-transferring capacitor. The corresponding voltage conversion ratio is much lower than that of the traditional synchronously rectified (SR) buck converter, and the proposed converter can achieve extremely low output voltage with an appropriate duty ratio. Moreover, there are three major merits in the proposed converter. One merit is that the voltage conversion ratio of the proposed converter is linear, thereby making control quite easy. Another merit is that if one of the switches fails or is abnormally controlled, a high voltage does not appear in the output terminal, so the output load can be protected. The other merit is that the proposed converter can be driven using the existing SR buck pulse-width modulation control integrated circuit. In this study, brief theoretical deductions and some experimental results are given to verify the feasibility and effectiveness of the proposed converter.

1 June 2010 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
KHK. I. Hwu
K. I. Hwu
Yeu-Torng YauYeu-Torng Yau
Yeu-Torng Yau
In this letter, a KY boost converter is presented, which is the KY converter combined with the traditional synchronously rectified (SR) boost converter. Such a converter has continuous input and output inductor currents, different from the traditional SR boost converter, and has a larger voltage conversion ratio than the traditional SR boost converter does, and hence, this converter is very suitable for low-ripple applications. A detailed description of the proposed converter is presented herein along with a mathematical deduction and some experimental results.

7 November 2011 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
KHK. I. Hwu
K. I. Hwu
Yeu-Torng YauYeu-Torng Yau
Yeu-Torng Yau
In this paper, a novel step-up converter is presented, where the charge pump concept, combined with the traditional boost converter structure, is utilized. Although two inductors are used in such a converter, the difference in value between the two inductors affects the regulation performance of this converter slightly. Furthermore, the behavior of this converter is similar to the traditional boost converter, and hence, the control of this converter can be realized easily. Above all, the energy stored in the two inductors, connected in series with the energy stored in the charge pump capacitor and the input voltage, is released to the load during the demagnetization period. In this paper, the basic operating principles of the proposed converter are presented along with some experimental results to demonstrate the effectiveness of this converter.

6 November 2013 in IEEE Transactions on Power Electronics
Verified
Journal Article
Closed access
KHK. I. Hwu
K. I. Hwu
Yeu-Torng YauYeu-Torng Yau
Yeu-Torng Yau
As generally acknowledged, the high step-up dc-dc converter is widely used in the sustainable energy system as the front-end stage of the dc-ac converter. Therefore, a high step-up converter combining one coupling inductor and two bootstrap capacitors, together with the active voltage-clamping circuit which pumps portion of the leakage inductance energy to the output, is presented herein. By doing so, the efficiency at light load can be upgraded greatly, and hence tends to be flat between the minimum load and the rated load. In this letter, the basic operating principles of this converter are first illustrated in detail, and second some experimental results are provided to demonstrate the effectiveness of the proposed high step-up converter topology.

9 November 2010 in IEEE Transactions on Industry Applications
Verified
Journal Article
Closed access
KHK. I. Hwu
K. I. Hwu
Yeu-Torng YauYeu-Torng Yau
Yeu-Torng Yau
LLLi-Ling Lee
Li-Ling Lee
A multifunction circuit is presented herein and applied to a synchronously rectified flyback converter, with the circuit not only playing the role of an LC snubber but also detecting the zero crossing of the current to reduce switching loss and feeding the peripheral circuit. Hence, such a converter has high efficiency all over the operating range and, together with one front-end power-factor-correction ac-dc converter, is applied to feeding a LED streetlight. In this paper, the basic operating principles of the proposed topology are first illustrated in detail, and second, some simulated and experimental results are provided to demonstrate the effectiveness of the proposed topology.