Dissolution of cellulose with ionic liquids (IL) and deep eutectic solvent (DES) lets the comprehensive dissolution of cellulose. Basically, cellulose can be dissolved, in some hydrophilic ionic liquids, such as 1-butyl-3-methylimidazolium chloride (BMIMCl) and 1-allyl-3-methylimidazolium chloride (AMIMCl). Chloride based ionic liquids are suitable solvents for cellulose dissolution. Although the ILs is very useful in fine chemical industry, its application in the pharmaceutical and food industry have been very limited due to issues with toxicity, purity, and high cost. Seeing to these limitations, new green alternative solvent which is DES was used. This green solvents, may be definitely treated as the next-generation reagents for more sustainable industrial development. Thus, this review aims to discuss the dissolution of cellulose either with ionic liquids or DES and its application.
The weathering performance of rice husk-filled high-density polyethylene (RHPE) and natural wood was investigated in this study. The injection molded RHPE, in column end-cap (CECap) shapes, was exposed to both natural and accelerated weathering attacks. The durability of RHPE was compared to Kempas wood (Koompassia malaccensis) and neat polyethylene. Wood underwent the greatest losses in properties among the specimens. Four months of outdoor weathering turned the color of RHPE CECap into silvery grey. When the exposure time increased, the color of RHPE composite faded faster than neat polyethylene. The wood surface darkened and RHPE surface flaked off after being exposed to accelerated weathering conditions. Prolonged weathering exposure caused loss of impact strength of the RHPE composites. In general, RHPE is more resistible to weathering attacks as compared to Kempas wood.
The production of pure silver nanoparticles (Ag-NPs) with unique properties remains a challenge even today. In the present study, the synthesis of silver nanoparticles (Ag-NPs) from natural pullulan (PL) was carried out using a radiation-induced method. It is known that pullulan is regarded as a microbial polysaccharide, which renders it suitable to act as a reducing and stabilizing agent during the production of Ag-NPs. Pullulan-assisted synthesis under gamma irradiation was successfully developed to obtain Ag-NPs, which was characterized by UV-Vis, XRD, TEM, and Zeta potential analysis. Pullulan was used as a stabilizer and template for the growth of silver nanoparticles, while gamma radiation was modified to be selective to reduce silver ions. The formation of Ag-NPs was confirmed using UV–Vis spectra by showing a surface plasmon resonance (SPR) band in the region of 410–420 nm. As observed by TEM images, it can be said that by increasing the radiation dose, the particle size decreases, resulting in a mean diameter of Ag-NPs ranging from 40.97 to 3.98 nm. The XRD analysis confirmed that silver metal structures with a face-centered cubic (FCC) crystal were present, while TEM images showed a spherical shape with smooth edges. XRD also demonstrated that increasing the dose of gamma radiation increases the crystallinity at a high purity of Ag-NPs. As examined by zeta potential, the synthesized Ag-NP/PL was negatively charged with high stability. Ag-NP/PL was then analysed for antimicrobial activity against Staphylococcus aureus, and it was found that it had high antibacterial activity. It is found that the adoption of radiation doses results in a stable and green reduction process for silver nanoparticles.
The growing attention of starch fiber (SF) has led to the innovation of Polyvinyl Alcohol-SF (PVA-SF) blends. This blend is regarded as the biodegradable material which aims to reduce the accumulation of synthetic polymer solid waste derived from petroleum. In this study, the thermal blending characterizations of PVA-SF were investigated by differential scanning calorimetry (DSC), and thermogravimetric analysis (TGA). The water resistance of the blend was also evaluated to study the polarity of the blends. The blend was prepared by plasticizing the polyvinyl alcohol with glycerol and distilled water with the addition of starch fiber. The incorporation of SF to the blends was at 10 wt% to 50 wt% composition. Based on the thermal analysis, PVA-SF blends were suitable for processing at high temperatures, which can be seen by the shifted onset degradation temperature to a higher temperature. This is because cyclic hemiacetals which were provided by SF can act to prevent the thermal attacks. Conversely, increasing the starch fiber proportion to the film blend reduce the endothermic peak amplitude in the DSC thermogram. It was found that PVA-SF blend at the higher composition of SF had the highest water resistance. This may be attributed to the content of fibre in SF which is hydrophilic.
1 March 2010 in International Journal of Thermophysics
The effects of glycerol content in modified polyvinyl alcohol-tapioca starch were investigated. A series of plasticized polyvinyl alcohol (PPVA) and TS blends were prepared. Prior to compounding process, PVA was plasticized with 15-40 phr glycerol as well as addition of calcium stearate (CaS) and phosphoric acid. Blends of PPVA at composition of 50%, 60%, 70%, 80% and 90% TS with 20 phr glycerol were compounded using twin screw extruder. Blends of PPVA-TS were then processed via injection molding to produce test specimen for mechanical testing. It was found that the addition of glycerol in the blending is compulsory in order to have a better flowability during the processing process. In spite of that, the amount of glycerol inside the blending must be in the optimum composition to ensure that the mechanical properties of the blends are not affected.