Gas dispersion in non-Newtonian fluids is encountered in a broad range of chemical, biochemical, and food industries. Mechanically agitated vessels are commonly employed in these processes because they promote high degree of contact between the phases. However, mixing non-Newtonian fluids is a challenging task that requires comprehensive knowledge of the mixing flow to accurately design stirred vessels. Therefore, this review presents the developments accomplished by researchers in this field. The present work describes mixing and mass transfer variables, namely volumetric mass transfer coefficient, power consumption, gas holdup, bubble diameter, and cavern size. It presents empirical correlations for the mixing variables and discusses the effects of operating and design parameters on the mixing and mass transfer process. Furthermore, this paper demonstrates the advantages of employing computational fluid dynamics tools to shed light on the hydrodynamics of this complex flow. The literature review shows that knowledge gaps remain for gas dispersion in yield stress fluids and non-Newtonian fluids with viscoelastic effects. In addition, comprehensive studies accounting for the scale-up of these mixing processes still need to be accomplished. Hence, further investigation of the flow patterns under different process and design conditions are valuable to have an appropriate insight into this complex system.

The development of effective gas-liquid mixing systems in mechanically agitated vessels is typically evaluated in terms of the degree of bubbles dispersion. For instance, adequate gas distribution reduces the formation of oxygen-deficient regions and ensures suitable metabolic pathways in bioreactors. In this regard, the gas holdup is a direct measurement of the process performance because the bubbles’ characteristics determines the gas volume fraction inside the vessel. The accurate estimation of this parameter using empirical correlations provides a better insight and a rapid prediction of the mixing process characteristics, which is crucial for designing stirred tanks. However, a challenge in obtaining empirical correlations is related to the experimental ranges of geometrical and process system conditions. In fact, the existing gas holdup correlations have not considered gas dispersion in yield pseudoplastic fluids using a coaxial mixer that comprises concentric shafts rotating independently. As an opportunity in mixing process system design, this study aims to develop empirical gas holdup correlations for an aerated anchor-PBT coaxial mixing system containing a xanthan gum solution, which behaves as a yield stress fluid. The electrical resistance tomography technique was employed to measure the gas holdup based on the conductivity variation throughout the vessel. A central composite design of experiments was conducted to account for the effect of central impeller speed, anchor speed, and gas flow rate on the mixing performance. The results demonstrated a non-monotonic effect of the central impeller speed on the gas holdup, which indicates a variation in the flow regime. Furthermore, the results showed that the gas holdup was increased by decreasing the anchor speed or increasing the aeration rate applied to the system. The developed correlations were statistically assessed and a good agreement with the experimental data was verified, which enabled us to accurately estimate the gas holdup within the range of operating variables investigated.