The wheel-flat defect is one of the many issues decreasing the level of and comfort in light rail vehicles. The two main causes of wheel-flats are temporary or complete wheel blocking. The negative effect is the increase of the dynamic phenomenons in the wheel-rail interaction, which are impulsive in their nature. It could prove to be dangerous for the safety of the ride. Therefore, a regular wheel surface monitoring and wheel-flats detecting would be well-founded to the fast detection of a flat point and to take remedial measures. The main aim of the article is to present the algorithm, according to which the wheel-flat detection during tram passage is possible. Several vibration transducers were mounted on the rail and measured vibration amplitude during trams pass-by. The proposed method is based on the vibration signal processing in the time and frequency domain. The Hilbert transform was used in the algorithm and all research analyses. The carried out experimental study and the analysis of the results of the method, show a high efficiency in the wheel flat detection.
1 January 2021 in Latin American Journal of Solids and Structures
Flat spots on railway wheels critically threaten operational safety, accelerating track damage, noise pollution, and energy waste. Their repetitive, high-magnitude impacts dissipate mechanical energy as ground vibration and noise, directly reducing traction efficiency. This paper presents a comprehensive review of recent vibration and acoustic detection methods, comparing onboard and stationary wayside systems. The literature from 2019 to 2025 shows a trend toward machine learning and deep learning, often reaching nearly 100% accuracy in laboratory or simulated settings. However, most studies lack real-world validation with naturally occurring defects. Bridging this gap requires industry–academic collaboration for operational data and testing. Crucially, systems must classify defect severity in line with maintenance thresholds rather than focus on minor, non-actionable faults. Integrating these technologies into condition-based maintenance and predictive digital twins will enable optimization of scheduling and work orders. Future efforts should leverage edge computing for real-time analysis, federated learning for data scarcity, and energy harvesting for sensor autonomy. The goal is to develop field-validated, integrated systems that enhance safety, reduce energy loss, and improve reliability.
Human quality of life is constantly increasing, and so does the comfort of travel by various means of public transport, especially rail transport. One of the more crucial criteria for assessment of travel comfort is vibroacoustic comfort. This aspect is also substantial among rail vehicle operators and manufacturers. Sound quality evaluation is related to psychoacoustic indicators, but reducing the levels of acoustic pressure does not always correlate to increased quality of the perceived sound and improvement of human sound perception. Moreover the cause of unpleasant noise has to be taken into consideration. In many examples it is induced by specific vibrations and/or friction forces through components. The following article presents experimental research carried out in the in-situ conditions, testing the quality of work carried out by tram articulations considering vibroacoustic emissions. Several measurements were taken of vibroacoustic signals in several urban rail vehicles of the same type. Two different trams were chosen for analysis and their vibroacoustic emission levels as well as sound quality parameters were compared. One of the more crucial aspects of the research was to determine the dependency between vibrations around the area of articulations and squealing noise. The results indicate a large correlation between signals and deterioration in the work quality of the articulation in the given tram. Moreover, the authors suggest expanding on currently carried out maintenance in order to minimise inconvenient vibroacoustic phenomena during use.