Hafiz Muhammad Nadir

Dr. Hafiz Muhammad Nadir

School of Built Environment, Engineering, Leeds Beckett University, Leeds, UK
orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 September 2024 in International Journal of Environment and Geoinformatics
Verified
Journal Article
Open access
PDF file
Hafiz Muhammad NadirHafiz Muhammad Nadir
Hafiz Muhammad Nadir
Today's water world is pebbledashed with two main trepidations of water security/ scarcity, which need in-depth elaboration. Developing countries are particularly facing the impacts of water contamination and scarcity but lack the required impetus and technical infrastructure, thus necessitating swift actions to evaluate the effects of water security/ scarcity on the environment and water resources. In this study, an effort has been made to assess the water security/ scarcity situation in the twin cities of Rawalpindi/ Islamabad, elucidating the water quality/ quantity parameters in the Rawal Lake reservoir in Pakistan by analysing the contamination. The samples were collected/ tested during spring/ monsoon seasons to analyse temporal/fluvial impacts on water discharge. The results were compared with Pakistan's and WHO's drinking water standards before and after the water treatment. Almost all the testing parameters of the raw water samples from the Rawal Lake reservoir feeding streams exceeded the standard limits or fell close to the upper threshold limits, suggesting that this water was unsuitable for drinking without extensive treatment and an efficient distribution system. The contamination, untreated sewage disposal, non-regulated water utilisation, drawdown and supply/ demand gaps are the grave factors causing the water security/ scarcity in the capital/ twin cities of Islamabad/ Rawalpindi. Pakistan has already entered the water scarcity threshold of 1014 m3/ person/ annum in 2018, reduced from water availability of 5260 m3/ person/ annum in 1950 and will likely reach a drought level by 2050 due to increased population and reduced water resources. The study proposes an organisational implementation model for catchment-level river management to ensure good quality of water, construction of 5-10 small dams, and the provision of water from Terbella Dam suggested as the long-term strategy to prevent water scarcity.

14 October 2021 in Research & Development in Material Science
Verified
Journal Article
Open access
PDF file
AAAsh Ahmed
Ash Ahmed
JCJoshua Cunliffe
Joshua Cunliffe
Hafiz Muhammad NadirHafiz Muhammad Nadir
Hafiz Muhammad Nadir
NLNeshe Limbu
Neshe Limbu
OAOsama Abdelwahab
Osama Abdelwahab
LYLee Yates
Lee Yates
Portland Cement (PC) is the key ingredient used in concrete; mixed with its other constituents, aggregates and water, a chemical reaction occurs, resulting in calcium silicate hydrate...

17 July 2024 in Academia Materials Science
Verified
Journal Article
Open access
Hafiz Muhammad NadirHafiz Muhammad Nadir
Hafiz Muhammad Nadir
AAAsh Ahmed
Ash Ahmed
IMIkram Moshi
Ikram Moshi
The researchers pioneered incorporating waste materials exhibiting pozzolanic properties and waste fibers from diverse industrial/agricultural fields into the construction industry to formulate enhanced, greener supplementary cementitious composites (SCMs). This research focused objectively on the formulation/evaluation of low-CO2-embodied greener construction materials known as “novel, alternative, fiber-reinforced iron-based binary/ternary pozzolanic composites (abbreviated as NAFRIC)”. The composites incorporated iron powder (Fe), metakaolin (MK), pulverized fly ash (PFA), ground granulated blastfurnace slag (GGBS), palm ash, silica fume, and limestone, which are anticipated to absorb CO2 while producing siderite (ferrous carbonate FeCO3). All the NAFRIC mixes formulated in this study demonstrated up to 4–13% improvement in compressive strength and 70–130% in flexural strength with an enhanced rupture modulus/post-crack ductility. The ternary pozzolanic iron-based fiber-reinforced concrete (FRC) composites containing 8% MK + 10% PFA + 10% GGBS and steel/polypropylene/polyethylene terephthalate (PET) fibers performed the best with attaining up to 70 MPa compressive and up to 8.9 MPa flexural strengths. The sulfate testing evaluated the durability of NAFRIC SCMs formulated in a 1:2:3 ratio better than cement concrete control mix with a 1:1:3 ratio. NAFRIC specimens demonstrated minimal surface deterioration/elongation and negligible/no strength reduction after 270 days of concentrated sulfate attack. The microstructural analysis using X-ray diffraction/fluorescence, scanning electron microscopy/energy-dispersive analysis with X-ray spectroscopy supported the strength and durability parameters by showing minimal/no ettringite formation and increased calcium silicate hydrates gel formation due to the use of FeCO3 and pozzolans. The study demonstrated the sustainable use of these better-performing NAFRIC SCMs with 10–12% reduced embodied CO2 as eco-friendly high-strength SCMs with enhanced engineering/environmental benefits.

22 December 2022 in Research & Development in Material Science
Verified
Journal Article
Open access
PDF file
Hafiz Muhammad NadirHafiz Muhammad Nadir
Hafiz Muhammad Nadir
AAAsh Ahmed
Ash Ahmed
Hafiz Muhammad Nadir1 and Ash Ahmed2* 1PhD Researcher, Civil Engineering Group, School of Built Environment & Engineering, Leeds Beckett University, UK 2Associate Professor, Civil Engineering Group, School of Built Environment & Engineering, Leeds Beckett University, UK *Corresponding author: Ash Ahmed, Associate Professor, Civil Engineering Group, School of Built Environment & Engineering, Leeds Beckett University, Civic Quarter Northern Terrace Leeds, LS2 8AG, UK Submission: December 12, 2022;Published: December 22, 2022 DOI: 10.31031/RDMS.2022.18.000935 ISSN: 2576-8840 Volume 18 Issue 2 The well-known weakness of cement concrete against external/internal sulphate attack and an estimated 7-10% global greenhouse gas emission by the construction industry (mainly contributed by cement manufacturing and supply have encouraged researchers to elucidate the chemical synthesis taking place in the preparation and hydration of cement concrete along with the factors affecting the sustainability of hardened concrete. In this review study, an endeavour has been made to explore the use of Supplementary Cementitious Materials (SCMs) of different hydrocarbon compositions, including organic/ inorganic compounds like pozzolans derived from natural (zeolite/ metakaolin derived from kaolinite), agricultural (rice husk ash, corn cob ash) and industrial fields Pulverised Fly Ash (PFA), Silica Fume (SF) and a renowned cement replacement material, i.e., Ground Granulated Blast Furnace Slag (GGBS),). The partial replacement of 0-30% pozzolans with cement as a binder has been reviewed objectively to achieve economic/ environmental benefits by enhancing strength and durability against dangerous sulphate attacks. The chemo-mechanical synthesis involving SCMs has been explored to understand the formation of additional calcium silicate hydrate C-S-H gel by blending various pozzolans. The research elucidates an improvement in strength up to optimum ratios of 1-15% for different SCMs. However, the strength was observed to reduce beyond a certain % ratio of SCMs blending due to the formation of expansive alkaline silica hydroxide gel, which causes cracking and weak structure. The aviation industry is considered the top emitter of CO2 (3% of total global emissions), however, the construction industry emits 7-10% of global greenhouse gases, which is nearly three times greater. Therefore, the supportive use of up to 90% SCMs can result in a significant reduction of CO2 by the construction industry based on the type/ratio of blending SCMs. Microstructural studies using scanning electron microscopy SEM and X-ray Diffraction (XRD) have also been explored. These microstructural studies have further clarified the development of ettringite in concrete after sulphate attack and the beneficial use of pozzolans to a certain extent to prevent the formation/ propagation of ettringite-specific cracks in the micro/ nano-pores of concrete structures. In general, research has shown that the addition of SCMs in concrete results in an increase in strength and superior resistance to sulphate attack. Keywords: Chemical synthesis; Sulphate attack; Pozzolans-based SCMs; Mechanical properties; Microstructural scanning Technological advancement has enabled engineers to produce masterpieces of construction in diverse geographical/ ecological locations by harnessing nature’s power, enabling a comfortable human life but subjecting the environment and infrastructure to different chemical / pollution hazards [1]. The use of lime and natural volcanic pozzolans has been in use since ancient civilisations [2]. The invention of ordinary Portland cement in the 1860s suppresses the use of lime/ pozzolans due to its swift setting time and easy insitu handling [2,3]. Still, it resulted in up to 10% of global CO2 emissions [4]. The cement concrete was found to be highly vulnerable to the ingress of sulphates and chlorides in marine environments [2-8]. Therefore, the researchers focussed on the formulation of greener alkali activators [9-13] as supplementary cementitious materials SCMs [14] to address cement concrete vulnerabilities [15,16]. The research suggests that using pozzolans in cement concrete as SCMs to specific ratios improves mechanical properties and prevents the ingress of moisture-containing harmful minerals/ chemicals by reducing porosity, permeability and creating defence layers against sulphate internal/ external attacks [8,17-20]. In this paper, a review study has been conducted to explore the beneficial performance of SCMs-based concrete composites under accelerated sulphate attacks. Review of chemical synthesis in cement hydration and sulphate attack The chemistry of cement hydration:R.H. Bogue identified the main four ingredients of cement hydration in 1960, which include alite (C3S tricalcium silicate 3CaO.SiO2), belite (C2A dicalcium silicate 2CaO.SiO2), celite (C3A tricalcium aluminate 3CaO.Al2O3) and felite (C4AF tetracalcium alumina ferrite 4CaO.Al2O3.Fe2O3) [10,21- 24]. Alite starts the cement hydration process and is considered the major initial strength-imparting compound, followed by belite, which is considered to impart the latter strength of concrete by the formation of calcium silicate hydrate (3CaO.2SiO2.3H2O), also known as C-S-H gel (equations 1,2) [10,25,26]. Equation 1 Equation 2 The third compound, “celite”, contributes to the flash-setting property of cement and does not impart any significant strength to...

15 January 2021 in Research & Development in Material Science
Verified
Journal Article
Open access
PDF file
AAAsh Ahmed
Ash Ahmed
Hafiz Muhammad NadirHafiz Muhammad Nadir
Hafiz Muhammad Nadir
Hafiz Muhammad Nadir1 and Ash Ahmed2* 1Doctoral Researcher, Civil Engineering Group, Leeds Beckett University, UK 2Associate Professor of Civil Engineering Group, Leeds Beckett University, UK *Corresponding author: Ash Ahmed, Associate Professor of Civil Engineering Group, UK Submission: December 23, 2020;Published: January 15, 2021 DOI: 10.31031/RDMS.2021.14.000848 ISSN: 2576-8847 Volume 14 Issue 5 The rivers and water streams are considered as a source of fresh drinking water for the human being on earth. The main source of water entering to these reservoirs is surface run off, snow melting and underground water. The water at the river’s mouth is generally in the form of small streams which are considered clean but as they flow down the catchment, pollutants and nutrients start to enter in larger amounts due to anthropogenic activities and advanced land use by human beings. As per inspection of chief inspector “Drinking Water Inspectorate (DWI)” in 2016, out of more than 4600 water bodies and 3700 rivers in England, only one sixth could get “good” status and two third could get “moderate” status as per European union standards. This is though a good achievement in Europe but alarming also, as all rivers are required to have achieved specified “good” standards by 2021 (extended to 2027 for some categories). This phenomenon is pronouncing more complications in drinking water reservoirs or compensatory reservoirs from where water is taken out to utility companies and treated for domestic water supply incurring an enormous cost on its treatment before human consumption. The clean water standards can be achieved only if a strict control is implemented on entry of pollutants/ nutrients from surface run off using thorough catchment scale sensitive strategies. UK has been implementing strict measures under Environment Agency (EA), Department for Environment, Food and Rural Affairs (DEFRA) and other organizations like “Natural England”, “River Trust” and water utility/ supply companies to achieve desired standards of water quality in rivers by managing the whole catchment as per European union water framework directive (EU WFD) 2000.The catchment sensitive farming and nitrate vulnerable zones policies were started in 1992 and has been in full practice by implementing different stewardship schemes and fertilizers control measures in farmlands and arable lands. Ingbirchworth reservoir and Scout Dyke compensatory reservoir have been under catchment sensitive stewardship schemes to control quantities of nutrients especially nitrates and other pollutants since 2006 to maintain good quality water reservoirs for drinking and compensation to Don river. A partial success has been achieved in controlling the values of nitrates, phosphates, and suspended solids to enter from catchment farmlands by controlling the use of slurry/ fertilizers and implementation of good farming techniques. However, temporal and special variations show a variable result of presence of nitrates, phosphates and suspended solids at different streams in different times, more than specified limits of 11.3mg/L, 0.1mg/L and 25mg/L respectively. This requires more holistic efforts to control the bad practices in farming in adjacent farm/arable lands and improvements in stewardship schemes for catchment sensitive farming in Ingbirchworth areas. Keywords: Catchment sensitive farming;Nitrate vulnerable zones;Water quality;Stewardship farming schemes;Impact; Success Water is a common resource for all living creatures and is required to be preserved for use by all, in its pure/ natural form [1]. Unfortunately, the natural clean state of water in the rivers/ streams could not be preserved pollution free, mainly due to anthropogenic activities of humankind, land use changes, industrial revolution, heavy modified water bodies, geomorphological changes and climatic variations. All these have impacted the water quality with adverse effects on biodiversity and ecology. The increase in population and technology/ industry advancement have resulted into more use of fresh water from the environment. European Union Water Framework Directive (2000 & amended in 2012) wants every member state to implement best possible measures to prevent polluting the water streams physically or chemically by managing the complete river catchment as a wholistic approach [2]. This seems to be a gigantic task with less success possibilities but if implemented successfully, can stop doing the modifications and pollutants entry to water bodies throughout the catchment length by all stakeholder/ public partnership. UK has more than 8000 water streams in around 100 catchments to manage as per River Basin Management Plans prepared/ revised every 6 years by Environment Agency. These are managed to get ‘Good Status’ as per EU standards by 2021& 2027 (extended) due to non-attainment of goals set for 2015 [3]. The target to limit Nutrients and sediments into the rivers from farmlands remains a grey area in almost all EU countries and UK [4,5]. We are required to implement the best management practices to control all these pollutants entering to streams throughout the length of the river catchments which comprise the implementation of catchment sensitive farming being major source of pollutants, rehabilitation of barren land by forestation, control on land use changes, sediment transport to rivers from tillage/ cropless fields, control on farming and animal waste, preventing free entry of oil/ chemicals from roads as surface run off, control on industrial wastes/ sewerage treatment disposals and preservation of natural course of flow of streams with no/ less modifications. The anthropogenic pollution of water bodies by mixing of physical, chemical, biological and industrial waste in these streams is a result of increased population and human interventions especially after industrial revolution [6]. Kallis [7], Kaika [8], Adshead [9] & Grimeaud [10] have explained WFD issuance in 2000 as a historic milestone which combined all previous directives for maintenance of clean and healthy water for drinking/ irrigation/ bathing by preventing mixing/ disposal of waste, chemicals, organic materials, excessive use of nutrients/ manures, industrial waste and heavy modifications to water bodies for benefit of all living organism in all habitats including human beings, plants, birds, animals, microorganism and aqua life [7-10]. The WFD has been evolving over time into a detailed document by integration of various water related directives and policies issued time to time as shown in Figure 1; [11] and ask member states to maintain water reservoir for all purposes free from dangerous pollutants and treatment of wastewater before entering it to water streams through proper treatment plants. The treatment of polluted water is a costly affair and incurring major cost/ difficulty to water agencies in UK to achieve desired standards as implemented by EU WFD especially due to nitrate vulnerable farming in the catchment areas [12]. Figure 1: Integration of WFD [11]. The farmlands, cultivated areas and grassy fields are considered as a biggest source of entry of nutrients like Nitrate, Sulphate and Phosphates and Suspended Solids (SS) into water streams and reservoirs due to extensive use of organic manures and chemical fertilizers by farmers. The best solution to overcome the presence of nutrients and Suspended Solids (SS) is to implement a sustainable and sensible land use strategy for controlled agriculture/ farming in the catchment. The agriculture contributes £8 Billion in UK GDP by employing more than 0.3M people to do arable farming on three quarters of UK land [13]. However, controlling the farming industry to desired results is very difficult as any restrictions on use of fertilizers/ manures and implementation of catchment sensitive farming measures result into direct reduction of production yield and economic loss to farmers. However, UK government has implemented the rules for catchment sensitive farming with several subsidies to ease out the economic burden on farmers and they were required to implement the rules by 2019 with restricted use of land falling in the catchment vicinity of water reservoirs. The success of catchment sensitive policy is still questionable as much is required to be done by farmers in collaboration with DEFRA (Department for food, environment and rural affairs) and EA (Environment agency UK). This study has been carried out to assess the post implementation scenario/ water quality after incorporation of catchment sensitive farming in Ingbirchworth and Scout areas in South Yorkshire. In this study, water samples were collected from Ingbirchworth drinking water supply reservoir and Scout Dyke compensatory reservoirs maintained by Yorkshire Water Agency in the catchment of River Don. These reservoirs are fed by different water streams mainly draining water from surrounding arable/ farmlands of around 11.2km2 comprising mainly on grassland and some of the cultivated crop lands. This area is being managed by catchment sensitive farming under policies of DEFRA, Nitrate Vulnerable Zones legislation and Catchment Sensitive Farming advice since 2002. Pictorial coverage/ maps of reservoir are given in Figure 2. Figure 2: Maps and Pictures Ingbirchworth reservoirs taken during site visit. The ever-increasing human interference in nature and especially for last 5 decades after industrial revolution, have caused more intake of nutrients and SS into water streams than ever before [14,15]. Edwards and Withers (2008) have studied that the water reservoirs are facing anthropogenic concentration of nutrients and SS due to increased use of fertilisers, manure, slurry, polluted surface drainage, wastewater, modified land use for agriculture, farms, urbanization, deforestation and industry [16]. Up to 70 % of Nitrogen and 30 to 50 % of phosphorous are coming from agricultural/ farms land into the reservoirs/ water streams in UK [17]. Runoff from arable/ farmlands is producing influx of up to 75% of SS [18], 25% of phosphorus and 60% of nitrate inputs to rivers [19]. Ockenden et al (2012) in their study found that it is difficult to control the influx of pollutants from Agri lands due to diffused use of fertilizers and presence of residual chemicals/ slurry in soil even in controlled catchment management [20]. There is a need of controlling the pollution sources from the fields by controlling application of fertilizers/ manures, over grazing, tillage, cross slope cultivation, edge of fields/ buffer zones, wetlands, maintenance of surface runoff and ditches/ drains in the catchment areas [21,22]. The pollutants can be point source or diffuse pollution in the form of Nutrients/ waste from agriculture/ farmlands, chemicals/ waste from industry/ roads/ surface drainage, sewerage treatment plants disposal, waste/ leakages from sewerage systems of rural/ urban population, microplastic, pharmaceuticals or modified structures [23]. These pollutants are responsible for bad water quality which largely affect the aqua life in the form of decreased biodiversity, genetic variations of species in water, algae/ bacteria/ coliform growth, dead zones due to decreased dissolved oxygen and sediments concentration. A per OFWAT (2011), England and Wales extract more than 55 billion litres/day from ecological water cycle which is equal to Winder Lake water. Water companies supply 15 billion litres/ day as treated water for domestic use, and they have charged customers £30 billion for treatment/ disposal of this water. To minimize this amount and to reduce the impact on ecosystem by extraction of this much of water, Billions of pounds have been spent on catchment management to get good quality raw water and return it back to environment with less treatment effort [24]. The pollutants are dissolved/ diluted by attenuation in river streams in open channel flow but extraction of huge amount of water affects this attenuation/ dilution capability of water. Therefore, best catchment management practices are required to maintain the water cycle with minimum disturbance. Fresh water is extracted from environment and used for different purposes. During use, water gets polluted by human and after treatment by Wastewater Treatment Plants (WWTP) and then it is released back in water streams. The treated water is not 100% free from pollutants/ chemicals and badly disturbs the water cycle in quality/ quantity both. As per press release of Environment Agency EA (2019) on efficacy of WWTP in UK, the standards achieved by the water companies in their WWTP since 2011, has deteriorated due to increase in sewage mixing occurrences in 2018. Only Northumbrian Water, one out of 9 water companies in UK, has achieved passing standards [25]. The partially treated water from these treatment plants is a source of pollution like pharmaceutical/ cosmetics residuals/ chemicals [26,27], microfibers/ microplastics [28,29] faecal coliform bacteria and other pathogens [30]. As per WWF (2019), one of the major causes of failing of UK rivers in getting good ecological status is pollution from WWTP as it impacts around 40% of UK rivers. It is imperative to modernize the WWTP to work as per the standards laid down by EU WFD and those specified by Environment Agency UK, otherwise UK may not be able to meet the 2021 & 2027 WFD targets [30]. UK customers are paying around £1.25 Billion annually as their water/ sewerage bills to water companies for the treatment of fresh/ wastewater, since 1989. Therefore, water companies are required to invest more on their plants and catchment management as a good preventative measure to maintain quality of water in rivers [31]. Some catchment management schemes and their efficacy in reducing water pollution throughout river catchment The best management practice to maintain a River Catchment is to control pollution entering the rivers from agriculture and farmlands. The bulk source of sediments, nitrate and phosphate to rivers is due to soil erosion/ use of fertilizers/ slurry in agriculture/ grazing fields which cause growth of algae and decrease in dissolved oxygen in water streams. Following paragraphs give details of some catchment schemes and their efficacy in getting desired results: SCaMP 1,2 and 3 by United Utilities since 2005 to 2020 are the catchment management examples in which around 60,000 hectares of land has been managed with catchment sensitive farming, forestation, peatland drains blockage, re-vegetation and fencing etc. There have been improvements/ steady results in water quality as regards the colour, dissolved oxygen, dissolved organic carbon, less soil erosion/ sediment transport, rehabilitation of natural habitats to some extent with temporal/ spatial variations because of these schemes though lesser than the desired results. However, more area is required to be managed to get better results in the catchment with participation/ finances of farmers, NGOs and government organization [32]. Collins [33] in their study of implementation of 12 onsite nutrients/ sediment control measures on farmlands in UK found that a localized impact on reduction in the levels of nitrate by 2.5%, phosphate by 11.9% and Sediments by 5.6% was observed with annual cost of £52/ hectare. It will cost around £450 million for whole agriculture land in UK annually to decrease the levels by these small levels. The 100% efficacy of these catchment practices involve more than 700 measures which are required to be fully controlled for the desired results of WFD with enormous investment and willingness participation of farmers [33]. DPIWE (2003), Department for primary industries, water and environment Tasmania carried out study on water quality of Montagu River after decades of its catchment management and found out very less improvement in quality of water as all indicators about nutrients, sediments, coliform bacteria and other physical/ chemical impurities remained more than the specified limits in almost all the reaches of the river thus showing hardly any success of catchment management to improve the water quality. The failure was caused mainly by non-implementation of the required practices, no control on use of fertilizers on farmlands, no proper disposal of sewerage/ industrial waste, lack of public participation and lack of finances [34]. McDowell [35] carried out the study for assessment of water quality in Pomahaka River catchment in New Zealand after decades of management for levels of nitrates, phosphate, suspended solids and E-coli bacteria. Very little improvement was observed in the length of the river with a lot of spatial/ temporal variations. Overall, the given indicators could not get better improvements due to application of fertilizers/ slurry on wet soils, unvegetated fields in non-crops season, ploughing of wet soils, direct ingress of animal faecal from Sheep and dairy farms and mixing of overflow sewerage from urban/ rural population [35]. Kay [36] studied Ingbirchworth reservoir catchment area to determine efficacy of catchment management which was declared Nitrate Vulnerable Zone (NVZ) under EA in 2002 and associate catchment ECSFDI in 2006 (England catchment sensitive farming Delivery Initiative ECSFDI). It comprises 3 reservoirs mainly surrounded by grazing lands of livestock with very less arable land. EA has managed the monitoring of this area by taking fortnightly samples at 11 points. They used the long-term data of EA and took 50 samples to determine the improvements in water quality. A partial success of catchment management in nitrate and phosphate levels in last 3 decades was observed that too only in a few streams having variations of levels lesser/ more than the specified limits in different peak times showing temporal/ spatial variations. The conclusion was drawn that localized management can give a better result for a local area only, however much more is required to be done by public participation and stricter implementation mechanism by government agencies to achieve results in the whole catchment. The results achieved for reduction of nitrates, phosphates and suspended solids over long-term observations of 3 years were found highly susceptible to temporal and spatial variations though partial improvement has been achieved as shown by ranges, median values and lower/ higher limits with first and fourth quartile box graphs as given in Figure 3; [36]. Figure 3: Presence of Nitrate and Phosphate in Ingbirchworth/ Scout Dyke 2006-2009 [36]. There is a need to interact with farmers to implement catchment sensitive practices like how, when and what quantity of fertilizers to be used, how to use slurry like injecting into the soil instead of spraying it on the soil, how to store the slurry, pesticides, insecticides and fertilizers etc away from water channels under the roof. How to do soil tillage and at what time. They should not plough the fields when soil is wet, should not spray in rainy weather, should maintain a buffer zone in between the water channel and crops edge, should grow a cover crop to stop sediments entry from naked soil and they should have mixed breeds/ types of animals as livestock [24,37- 39]. DEFRA is interacting with farmers by frequent site visits of its employees to give guidelines and to do audit of implementation of DEFRA guidance/ rules. However, there is a direct requirement of public...

13 April 2022 in Research & Development in Material Science
Verified
Journal Article
Open access
PDF file
Hafiz Muhammad NadirHafiz Muhammad Nadir
Hafiz Muhammad Nadir
AAAsh Ahmed
Ash Ahmed
PPParneet Paul
Parneet Paul
MMMark Mitchell
Mark Mitchell
Hafiz Muhammad Nadir1, Ash Ahmed2*, Parneet Paul3 and Mark Mitchell4 1Researcher, Civil Engineering Group, Leeds Beckett University, UK 2Associate Professor (Reader), Civil Engineering Group, Leeds Beckett University, UK 3Professor and Head of Engineering, Department of Engineering, School of Built Environment, Engineering and Computing, Leeds Beckett University, UK 4Technical Director, Adfil Construction Fibres, Hull, UK *Corresponding author: Ash Ahmed, Associate Professor (Reader), Civil Engineering Group, Leeds Beckett University, UK Submission: March 21, 2022;Published: April 13, 2022 DOI: 10.31031/RDMS.2022.16.000899 ISSN: 2576-8840 Volume 16 Issue 5 Researchers have been working on formulating Fibre Reinforced Concrete (FRC) composites that are economical, eco-friendly, and waste absorbent. Incorporating agricultural/ industrial waste into the construction industry as fibre-reinforced composites is a novel research field that can recycle and convert waste into valuable supplementary materials. In this study, concrete composites with fibres of coconut coir (COF), wheat straw (WSF), and shredded fibres from waste plastic bottles (PETF) were evaluated and compared against the established use of polypropylene fibres (PPF) and steel fibres (SF). The study’s objectives were set to attain the strength of 32-40MPa (C32/40 European grade) for using these waste fibres as alternatives in FRC. A concrete mix ratio of 1:2:3 with 1-2% waste fibres (COF & PETF), 1-2% PPFC and 10% & 17% steel fibres were used to produce cubes, cylinders, and prisms for testing on 7 and 28 days for evaluation of compressive, split tensile and flexural strengths. Generally, all FRC mixes with 1% fibre dosage exhibited an increase of compressive strength by 9-44% at 28 days of curing. All fibre composites gave characteristic compressive strength of 40-60MPa. The split tensile strength of all-fibre composites was improved up to 48% with 1-2% fibres. The flexural strength of all-fibre composites improved by 11-42% with 1% fibre and 10% steel fibre but increased fibre’s quantity to 2% and steel fibre to 17% reduced the flexural strength suggesting that fibre content should not exceed more than 2% of cement weight in composites. Shredded fibres of PET plastic bottles outperformed the established micro/macro PPF as PETF exhibited better flexural strength than PPF with both 1 and 2% dosages. The natural fibres of coir/ wheat straw gave better/at par flexural strength (7.3MPa) compared to steel fibres (6.9MPa). In conclusion, it is suggested that the optimum quantity of 1-2% of these novel alternative fibres after necessary treatment is feasible for the formulation of environmentally friendly fibre concrete composite with enhanced mechanical properties. Keywords: Fibre-reinforced concrete; Waste fibres materials; Mechanical properties; Post crack ductility; Empirical modelling Abbreviations: FS: Friction Surfacing Concrete is an internationally recognised primary construction material used at a large scale for all types of modern construction due to its favourable mechanical properties, ease of use, economy, and sustainability. The fundamental binding ingredient of concrete is the cement which has replaced all old pozzolanic binders and lime with commercially produced grey/ white ordinary Portland cement. This cement was derived from hydrated lime, given the name of Ordinary Portland Cement (OPC) by Joseph Aspdin in 1824 due to its resemblance to Portland stone found in Isle of Portland, Dorset, UK. The enhanced version of commercial cement was introduced by his son William Aspdin in 1840 and is mainly in use in present manufacturing industries with some improvements/modifications/additions [1]. Concrete is among the most widely used materials due to its compressive strength, durability, early setting time, and insitu usability. Still, it exhibits lower tensile/ flexural strength and lower capability against the development/progression of cracks [2]. The issue of tensile/flexural strength is amicably resolved by incorporating steel reinforcement in the form of Reinforced Cement Concrete (RCC). However, the development of cracks over setting up/ageing of concrete and its rigid non-ductile behaviour remains an issue, especially the surface level micro-cracks even with steel reinforcement [3-6]. The cracks in RCC on propagation may make it porous and susceptible to corrosion, chipping of concrete cover, and gradual bending/decay of steel with ultimate weakening or even collapse of structure [7]. Moreover, the RCC cost makes it undesirable sometimes for low cost/low strength infrastructures where only Plain Cement Concrete (PCC) can serve the purpose by adopting alternative arrangements for cracks control. This aspect encouraged the researchers to look for mixing fibres with PCC to improve the mechanical properties of concrete with a low-cost, eco-friendly solution [8]. Incorporating fibres and aggregates produced as waste from other industrial/ agricultural sources in concrete structures can be an excellent eco-friendly dual-purpose disposal option, enhancing concrete properties and a cleaner environment [9-12]. With increased population, urbanisation, modern resources, and the latest manufacturing trends, the world contributes to an exponential increase in waste production. As per a recent study, the world is now facing disposal issues, often more waste than in the last century, waste production has doubled in the last decade, and low/middle-income countries will double their waste production by 2025 from 1.3 billion tons to 2.2 billion...