We propose a coded acoustic metasurface (CAM) to generate Airy-like beams (ALBs) in air. A space-folding structure is designed to act as the bit “1” unit of the CAM, and an air unit with the same size is used as the bit “0”. Finite-element simulations demonstrate that the ALBs generated by this simple CAM have excellent self-accelerating, self-healing, and non-diffracting features. It is found that the bit “1” unit works well in a large frequency range of 6–9 kHz, and the CAM, therefore, generates a broadband ALB. Furthermore, two symmetrical CAMs are employed to compose a lens for realizing the acoustic focusing in the frequency range of 6–9 kHz, and the focal length of the CAM lens is sensitive to the working frequency. The work presented here could greatly benefit acoustic imaging, particle trapping and manipulation, and broadband acoustical devices.
An acoustic metasurface (AM) composed of space-coiling subunits is proposed to generate acoustic Airy-like beams (ALBs) by manipulating the transmitted acoustic phase. The self-accelerating, self-healing, and non-diffracting features of ALBs are demonstrated using finite element simulations. We further employ two symmetrical AMs to realize two symmetrical ALBs, resulting in highly efficient acoustic focusing. At the working frequency, the focal intensity can reach roughly 20 times that of the incident wave. It is found that the highly efficient acoustic focusing can circumvent obstacles in the propagating path and can be maintained in a broad frequency bandwidth. In addition, simply changing the separation between the two AMs can modulate the focal length of the proposed AM lens. ALBs generated by AMs and the corresponding AM lens may benefit applications in medical ultrasound imaging, biomedical therapy, and particle trapping and manipulation.
We demonstrate that higher-order topological insulators with C4 symmetry can be realized in two-dimensional elastic phononic crystals. Both one-dimensional topological edge states and zero-dimensional topological corner states are visualized and can transform each other by tuning the crystalline symmetry in a hierarchical structure. The systematic band structure calculations indicate that elastic wave energy in the hierarchical structures can be localized with remarkable robustness, which is very promising for new generations of integrated solid-state phononic circuits with a great versatility. In addition, the corner states residing in a much wider bandgap greatly increase the signal-to-noise ratio of topological devices.
Artificial structure plates engraved with discrete Archimedean spiral slits have been well designed to achieve fractional acoustic vortices (FAVs). The phase and pressure field distributions of FAVs are investigated theoretically and demonstrated numerically. It is found that the phase singularities relating to the integer and fractional parts of the topological charge (TC) result in dark spots in the upper half of the pressure field profile and a low-intensity stripe in the lower half of the pressure field profile, respectively. The dynamic progress of the FAV is also discussed in detail as TC increases from 1 to 2. With increasing TC from 1 to 1.5, the splitting of the phase singularity leads to the deviation of the phase of the FAV from the integer case and hence a new phase singularity occurs. As TC m increases from 1.5 to 2, two phase singularities of the FAV approach together and finally merge as a new central phase singularity. We further perform an experiment based on the Schlieren method to demonstrate the generation of the FAV.
Focused acoustic vortex (FAV) beams can steadily trap particles in three-dimensions. Previous FAV emitters are mainly based on the active device arrays. Here, we design a passive artificial structure engraved with two sets of discrete Archimedean spiral slits to generate the FAV in water. The acoustic intensity and phase distributions of FAVs are investigated theoretically and demonstrated using the finite element method. The constructive interference between two transmitted acoustic vortices through the inner and outer spiral parts achieves the FAV. It is found that the focal length and depth of the FAV can be modulated by simply changing the initial radius of the Archimedean spiral. Furthermore, we implement the Schlieren imaging experiment to verify the generation of the FAV by the artificial structure. Our design may offer potential applications in particle trapping, biomedical therapy, and medical imaging.
2 November 2017 in The Journal of Physical Chemistry C