Emmanuel Galiwango

Dr. Emmanuel Galiwango

Clean Energy Innovation, National Research Council Canada, Ottawa, Ontario, Canada
orcid

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 December 2019 in Heliyon
Verified
Journal Article
Open access
Emmanuel GaliwangoEmmanuel Galiwango
Emmanuel Galiwango
NRNour S. Abdel Rahman
Nour S. Abdel Rahman
AAAli H. Al-Marzouqi
Ali H. Al-Marzouqi
MAMahdi M. Abu-Omar
Mahdi M. Abu-Omar
AKAbbas A. Khaleel
Abbas A. Khaleel
Towards the utilization of different parts of date palm biomass waste, low-concentration acid-alkali treatment was used to isolate the contained cellulose and α-cellulose. The cellulose yields achieved from the rachis, leaflet, and fiber parts of the biomass were 74.70%, 71.50%, and 73.82%, respectively, while the corresponding α-cellulose yields were 78.63%, 75.64%, and 70.40%, respectively. The cellulose samples were bleached and characterized by thermogravimetric analysis (TGA), Fourier-transform infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), and X-ray diffraction (XRD). The XRD results revealed high crystallinity of both the cellulose and α-cellulose samples, while the TGA thermograms indicated that the alkali treatment completely removed lignin and hemicelluloses from the rachis. The results of this study demonstrate the promise of using date palm biomass waste as raw material to produce cellulose and α-cellulose.

1 February 2020 in International Journal of Biological Macromolecules
Verified
Journal Article
Closed access
Dr. Mutamed AyyashDr. Mutamed Ayyash
Dr. Mutamed Ayyash
Basim Abu-JdayilBasim Abu-Jdayil
Basim Abu-Jdayil
PIPariyaporn Itsaranuwat
Pariyaporn Itsaranuwat
Emmanuel GaliwangoEmmanuel Galiwango
Emmanuel Galiwango
CTCamila Tamiello-Rosa
Camila Tamiello-Rosa
FHFathalla Hamed
Fathalla Hamed

1 December 2020 in Food Chemistry
Verified
Journal Article
Closed access
Dr. Mutamed AyyashDr. Mutamed Ayyash
Dr. Mutamed Ayyash
Basim Abu-JdayilBasim Abu-Jdayil
Basim Abu-Jdayil
PIPariyaporn Itsaranuwat
Pariyaporn Itsaranuwat
NANoora Almazrouei
Noora Almazrouei
Emmanuel GaliwangoEmmanuel Galiwango
Emmanuel Galiwango
ZNZein Najjar
Zein Najjar

Verified
Journal Article
Open access
PDF file
MHMozan Hassan
Mozan Hassan
MSMohsin Sulaiman
Mohsin Sulaiman
PYPriyadharshini Yuvaraju
Priyadharshini Yuvaraju
Emmanuel GaliwangoEmmanuel Galiwango
Emmanuel Galiwango
Ihtesham RehmanIhtesham Rehman
Ihtesham Rehman
Sahar MohsinSahar Mohsin
Sahar Mohsin
Synthetic bone graft substitutes have attracted increasing attention in tissue engineering. This study aimed to fabricate a novel, bioactive, porous scaffold that can be used as a bone substitute. Strontium and zinc doped nano-hydroxyapatite (Sr/Zn n-HAp) were synthesized by a water-based sol-gel technique. Sr/Zn n-HAp and poly (lactide-co-glycolide) (PLGA) were used to fabricate composite scaffolds by supercritical carbon dioxide technique. FTIR, XRD, TEM, SEM, and TGA were used to characterize Sr/Zn n-HAp and the composite scaffolds. The synthesized scaffolds were adequately porous with an average pore size range between 189 to 406 µm. The scaffolds demonstrated bioactive behavior by forming crystals when immersed in the simulated body fluid. The scaffolds after immersing in Tris/HCl buffer increased the pH value of the medium, establishing their favorable biodegradable behavior. ICP-MS study for the scaffolds detected the presence of Sr, Ca, and Zn ions in the SBF within the first week, which would augment osseointegration if implanted in the body. nHAp and their composites (PLGA-nHAp) showed ultimate compressive strength ranging between 0.4–19.8 MPa. A 2.5% Sr/Zn substituted nHAp-PLGA composite showed a compressive behavior resembling that of cancellous bone indicating it as a good candidate for cancellous bone substitute.

31 January 2022 in Polymers
Verified
Journal Article
Open access
PDF file
NMNoran Mousa
Noran Mousa
Emmanuel GaliwangoEmmanuel Galiwango
Emmanuel Galiwango
SHSabeera Haris
Sabeera Haris
AAAli H. Al-Marzouqi
Ali H. Al-Marzouqi
Basim Abu-JdayilBasim Abu-Jdayil
Basim Abu-Jdayil
YCYousuf L. Caires
Yousuf L. Caires
Petroleum-based plastic is widely used in almost all fields. However, it causes serious threats to the environment owing to its non-biodegradable properties, which necessitates finding biodegradable alternatives. Here, date palm rachis (DPR) waste was used as a filler (30, 40, and 50 wt%) to form a biodegradable composite with polylactic acid (PLA) and achieve cost–performance balance. DPR–PLA composites were prepared using a melt-mixing extruder at 180 °C by varying mixing time, DPR composition, and plasticizer type and composition. The biodegradable testing specimens were prepared by compression molding and analyzed using physical, thermal, and mechanical characterizations. Scanning electron microscopy images indicated a uniform dispersion of DPR (90 μm) in the PLA matrix. The esterification reaction resulting from this interaction between DPR and PLA was confirmed by Fourier transform infrared spectroscopy. The 30 wt% DPR–PLA composite was considered the optimal composite with the lowest melt flow index (16 g/10 min). This work confirmed the superior effect of addition of 10 wt% of triethyl citrate (TEC) compared with polybutylene adipate terephthalate (PBAT) by the improvement in the elongation at break of the optimal composite from 2.10% to 4.20%. Moreover, the addition of 10 wt% of PBAT to the optimal composite resulted in a lower tensile strength (21.80 MPa) than that of the composite with 10 wt% of TEC (33.20 MPa). These results show the potential of using the proposed composite as an alternative material for single-use plastics such as cutlery.

1 November 2016 in Energy Conversion and Management
Verified
Journal Article
Closed access
HLHoang Vu Ly
Hoang Vu Ly
KIKyungmin Im
Kyungmin Im
YGYoungchae Go
Youngchae Go
Emmanuel GaliwangoEmmanuel Galiwango
Emmanuel Galiwango
SKSeung-Soo Kim
Seung-Soo Kim
HWHee Chul Woo
Hee Chul Woo