The rapid growth in waste tire disposal has become a severe environmental concern in recent decades. Recycling rubber and steel fibers from wasted tires as construction materials helps counteract this imminent environmental crisis, mainly improving the performance of cement-based materials. Consequently, the present article aims to evaluate the potential use of waste tire steel fibers (i.e., WTSF) incorporated in the manufacture of soil–cement blocks, considering their compressive resistance as a primary output variable of comparison. The experimental methodology applied in this study comprised the elaboration of threefold mixtures of soil–cement blocks, all of them with 10% by weight in Portland cement, but with different volumetric additions of WTSF (i.e., 0%, 0.75%, and 1.5%). The assessment’s outcomes revealed that the addition of 0.75% WTSF does not have a statistically significant influence on the compressive resistance of the samples. On the contrary, specimens with 1.5% WTSF displayed a 20% increase (on average) in their compressive strength. All the tested samples’ results exhibited good agreement with the minimum requirements of the different standards considered. The compressive resistance was evaluated in the first place because it is the primary provision demanded by the specifications for applying soil–cement materials in building constructions. However, further research on the physical and mechanical properties of WTSF soil–cement blocks is compulsory; an assessment of the durability of soil–cement blocks with WTSF should also be carried out.
11 May 2023 in Journal of Building Pathology and Rehabilitation
El objetivo del presente estudio es evaluar las propiedades físicas y mecánicas del hormigón con residuos de caucho de neumático (RCN) como sustituto parcial a la arena, considerando materiales locales de la ciudad de Cochabamba, Bolivia, a fin de promover una economía circular. Para ello, se sustituyó la arena por RCN (en volumen) en cuatro porcentajes: 0% (referencia), 5%, 10% y 20%, evaluando sus propiedades mecánicas (resistencia a la compresión, tracción y flexión) y físicas (masa específica, absorción de agua e índice de vacíos). Los resultados indican que existe una tendencia a la disminución a mayor porcentaje de RCN, tanto para la resistencia mecánica como para las propiedades físicas, a excepción de la mezcla con 5% de RCN, la cual presentó resultados comparables al hormigón con arena natural. El RCN puede ser utilizado en la elaboración local de hormigón hasta en un 5% sin comprometer sus propiedades mecánicas y físicas, y brinda además un enfoque sostenible.