The magnetic chitosan beads (MCSB) prepared from the solution by using the external magnet and the adsorption of Ni (II) ions from wastewater and its cross-linked derivative with glutaraldehyde (GLU-MCSB) was investigated in a adsorption system. The GLU-MCSB sorbents that are insoluble in aqueous acidic solution and improve adsorption capacity. Adsorption process was carried out by considering into various parameters viz. adsorbent dose, contact time, pH and temperature. TGA of beads show that degradation takes place in two stages. FTIR spectra of magnetic beads exhibit absorption band at 606 cm−1 for Fe-O. The elemental analysis (EDAX) and scanning electron microscopy (SEM) were used to analyze the structure and characteristics of MCSB and GLU-MCSB. The Ni(II) removal efficiency attains a highest value of 95.12% with cross-linked GLU-MCSB in comparison 79.5% with MCSB. Adsorption processes follow the pseudo second-order rate kinetics model, which suggested that the rate-limiting step may be the chemical adsorption rather than the mass transport. The experimental data of adsorption fitted well with the Langmuir and Freundlich isotherms with a high correlation coefficient (R2 > 0.9), showing that monolayer adsorption took place on the surface of GLU-MCBS absorbents. The negative values of ΔS, −175.64 and −163.30 J/mol K and ΔH, −54.75 and −49.58 kJ/mol for MCSB and GLU-MCSB suggest that process is spontaneous and exothermic in nature.
The suspension cross-linking technique has been utilized to create the magnetic chitosan nanoparticles, which were then applied to the magnetic carrier method at 80°C. First the FeCl2 and FeCl3 solution co-precipitated and synthesized Fe3O4 for utilization in the formation of magnetic chitosan nanoparticles, it has been characterized by utilizing DLS (Dynamic light scattering), XRD (X-ray diffraction spectrometer), FTIR (Fourier transform infrared spectroscopy), which identified structure, size, FE-SEM (Field Emission Scanning Electron Microscope) and HR-TEM (High-resolution transmission electron microscopy) which identified structure and particle size whereas magnetic behavior of chitosan nanoparticles was determined by VSM (Vibrating sample magnetometer). According to the results collected, the magnetic chitosan nanoparticles have been spherical in form and size ranging from around 250 to 400 nm.