Non-carious cervical lesions (NCCLs) are saucer-shaped abrasions of a tooth. NCCLs can form due to various etiologies, including toothbrushing wear, acid erosion, and mechanical stress. Owing to this complex interplay, the mechanism of NCCLs in tooth abrasion has not been established. This study aims to develop a numerical method using a computational toothbrush to simulate NCCLs. The forces acting on the teeth and the amount of abrasion generated were evaluated. The discrete element method using in-house code, connected particle model, and Archard wear model were applied for brushing. In the toothbrush model, 42 acrylic tufts were fixed into a toothbrush head. The teeth models with enamel properties comprised four flat plates and two grooves to simulate the anterior teeth and NCCLs. The brushing speed and depth for one cycle were established as simulation parameters. The force applied within the ununiform plane was concentrated on several bristles as the toothbrush passed through the interproximal space. The brushing force (depth) had a greater effect on tooth abrasion than the brushing speed. Toothbrushing abrasion was mainly concentrated in the interproximal space. Therefore, forceful tooth brushing can cause NCCLs from the interproximal space to the cervical area of the tooth.
Studies on the washing process have been mainly conducted experimentally, and only a few numerical approaches have been studied. Previous numerical studies on the washing process have focused on analyzing the dynamic behavior of laundry; however, no study has been reported on the detergency caused by the dynamic behavior of laundry. In this study, we predicted the detergency due to the dynamic behavior of the fabrics in a front-loading washing machine using discrete element method simulations and compared the prediction with that of the washing experiments. In addition, the agreement between the experimental and simulated detergencies was high, with a correlation coefficient of 99%. The detergency in the experiment was successfully predicted with power consumption of laundry calculated by the simulations. The lower detergency for larger amounts of fabric was mainly due to reduced normal contact. This study describes the first framework for front-loading washing machine simulations using the discrete element method.
1 November 2008 in Journal of Non-Crystalline Solids