Product development has to increasingly handle challenges such as highly competitive market scenarios and rapidly changing customer demands. The Industry 4.0 paradigm has brought about a new range of methods and technologies which can support industry in dealing with these challenges. This paper contributes a digital manufacturing model which aims to support industry to bridge the gap with this advanced digital technologies and foster integrated product development. This digital model achieves this aim by providing a means to illustrate how these technologies can be employed during the different phases of the factory life cycle. The digital manufacturing model also illustrates the soft and meta-skills which need to be developed in order to support digitisation of product development activities. A number of use cases are presented which explore how Industry 4.0 technologies can be implemented within an integrated product development environment.
16 April 2024 in Progress in Additive Manufacturing
In recent years, studies have proven that conformal cooling channels (CCC) in an additively manufactured mould result in a more efficient and effective injection moulding process. This can be achieved since CCCs are designed to follow the contour of the part being moulded so that the surface of the part is equidistant from the channel at all points. However, no studies were found which explored the combined effect of mould material thermal conductivity and varying cooling channel designs on the cooling performance of the mould from a sustainability point of view. Within this context, a study was carried out to explore the effect of the tool material’s thermal conductivity on the performance of various CCC designs in comparison with conventional, straight drilled cooling channels. The performance of the cooling channels was analysed from a sustainability point of view by comparing the channel performances in terms of energy consumption, financial implications, and the resulting quality of the part. The results of this study showed that the higher conductivity alloys were especially effective at reducing the cycle time and improving the energy performance of the process in the conventional cooling channel designs. These materials were also capable of reducing the overall cost of the process which was calculated in terms of material costs and electricity consumption. For the CCC designs, however, the high conductivity alloys were less effective in all aspects of this analysis, namely cooling time, energy efficiency, and overall costs. However, it is worth noting that based on the melt flow simulations, the alternative materials had little to no effect on the resulting quality of the part.
10 April 2024 in Progress in Additive Manufacturing
There is a need to cost-effectively produce polymer components with meso/micro-scale internal geometries with high replication accuracy without the use of post-processing steps. A possible process chain to produce such polymer components with internal hollow features is by combining the 3D printing (3DP) and micro-injection moulding (MIM) processes. To date, no studies were carried out to explore the feasibility of such a process chain. Consequently, this experimental study investigated the use of the 3DP lost-cores that are over-moulded using the MIM process. The first step involved the production of lost-core from a soluble polymer material where three different materials were studied: two filament-based materials (Xioneer VXL130 and AquaSys180) and one resin-based material (IM-HDT-WS). The filament-based materials were printed on an Ultimaker S5 (filament fused fabrication) and the resin-based material was printed using an Asiga Max X27 (digital light processing). In the second step, the lost core was then over-moulded with polymethyl methacrylate (PMMA) using the MIM process. After demoulding, the internal core was then dissolved using the respective dissolution method of each material to achieve a part with meso/micro scale internal features. Investigations carried out at the different stages of the process chain revealed that the best dimensional accuracy was achieved when using the IM-HDT-WS material in the 3DP of the lost-cores and their subsequent over-moulding to form the case study part internal geometry. In particular, the dimensional analysis of the replicated IM-HDT-WS lost-core geometries onto the over-moulded PMMA revealed a difference of 0% in diameter and − 3.17% in bifurcation angle of the Y1.6 channel and a difference of + 4.88% in diameter and + 11.48% in bifurcation angle of the Y0.8 channels when compared to the respective 3DP core dimensional values prior to encapsulation. However, dissolution tests revealed that the filament-based material, the Xioneer VXL130, achieved a dissolution rate of 3.5 and 4.5 h for the Y1.6 and Y0.8 channel, respectively, which was marginally faster than that of the IM-HDT-WS.
21 July 2017 in Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
This article presents a systematic approach for assessing the maturity of manufacturing technologies. A methodology is proposed that is based on modelling the capability of the individual processes and technology interfaces between them. It is inspired by a capability maturity model which has been applied successfully in the field of software engineering. The methodology was developed to assess the maturity levels of individual processes and the combined maturity of pairs or chains of processes. To demonstrate its validity, it was applied for assessing the maturity of technologies in the micro and nano manufacturing domain. The results demonstrated its applicability as a tool for evaluating the maturity of micro and nano manufacturing pairs and their constituent processes. Also, it was shown that the methodology can be employed for identifying process pairs, suitable for integration in process chains, together with their potential weaknesses.
4 December 2022 in Computer-Aided Design and Applications