A new volumetric mix-design procedure utilizing the Superpave gyratory compactor (SGC) was developed for cold in-place recycling (CIR) asphalt mixtures with assistance from the Federal Highway Administration (FHWA). It was developed for partial-depth CIR using asphalt emulsions as the recycling additive. This procedure was calibrated using materials from five geographically varied locations in North America: Connecticut, Kansas, Ontario, Arizona, and New Mexico. It required that specimens be prepared at densities similar to those found in the field. The performance of CIR mixtures prepared in accordance with the new mix-design procedure was evaluated in the laboratory with mechanistic-empirical pavement design guide (MEPDG) models as well as in the field. Creep compliance and strength of the mixtures were determined at 0, −10, and −20°C using the Superpave indirect tensile tester (IDT) with satisfactory results. A field test section also had been established with CIR mixtures in Arizona using this...
The pavement experiences deterioration due to traffic and environment, i.e., unsatisfactory riding quality and structural inadequacy, over time. Thus, predicting pavement performance over time is one of the key elements of any pavement maintenance management system (PMMS). It can be used as an efficient tool to program/schedule the maintenance applications and expenditures, and thus the necessary funds can be allocated. Using a combination of independent variables for any selected pavement section can generate section-wise condition assessment and prediction models. Moreover, these models can be used to select the most cost-effective maintenance alternative to be applied to that pavement section. The present study developed an expert system based on pavement performance models which combines the available maintenance data with the knowledge acquired from the experts of the General Administration of Operation and Maintenance in Riyadh, Saudi Arabia. Eight regression models were first developed for four maintenance and rehabilitation (M&R) strategies, i.e., no maintenance, routine maintenance, overlay, and reconstruction for low and high traffic. Then, a practical expert system was developed to aid pavement maintenance engineers in finding the most effective and efficient M&R strategies and suitable time for the application. The regression models revealed that the effect of routine maintenance and reconstruction is greater in low traffic than in high traffic, while the effect of overlay is greater in high traffic than in low traffic. Based on this initial system, another improved one can be developed using the machine learning technique.
1 September 2017 in Journal of Materials in Civil Engineering
Organic paints are applied to galvanized or metalized steel surfaces in a duplex system, which is potentially more sustainable than the zinc-rich primer/steel system. A series of experimental tests were performed to measure and investigate adhesion strengths on three different types of roughened zinc surfaces. The contact angles were also measured for freshly formulated liquid paints on the roughened zinc surfaces to test if there is a correlation between the paint wetting property and the adhesive strengths. By comparing duplex system and zinc-rich primer/steel qualified North East Protective Coating (NEPCOAT) panels, it was found that the paint adhesion of the duplex system is as strong as the zinc primer/steel panels test results. The results also showed that adhesive strengths depend on the match between the paint and type of roughened zinc surfaces. The measurement of liquid paint wetting properties indicates small contact angles correlate with stronger pull-off adhesive strength. The authors of this study suggest that contact angle/strength correlation could be useful as a tool for optimizing the match between the paints and the profiled zinc surface.
5 December 2025 in Case Studies in Construction Materials