Polycrystalline Pb(Zr0.48Ti0.52)O3 thin films with the thickness of 0.2 μm on Pt-coated silicon substrates have been prepared by sol-gel process using electrochemically prepared titanium and zirconium solutions in methoxyethanol. Structure, morphology, and electrical properties of the films annealed by usual isothermal annealing for 1 hour and by rapid thermal annealing (RTA) for 1 minute have been studied. In contrast to isothermal annealing RTA results in highly oriented (100) films. This leads to higher dielectric constant (more than twice) of RTA annealed films, but no correlation between degree of orientation and polarization have been observed. Special attention has been paid to capacitance-voltage (CV) characteristics. Some parameters and simple models were introduced for the interpretation of CV data. Thus asymmetry of CV curves indicates that for the films prepared by RTA there exists a problem of disturbed layer formation at the Pt-PZT interface.
1 January 1995 in Journal of Sol-Gel Science and Technology
The current status of developments in the field of ferroelectric memory devices has been considered. The rapidly growing market of non-volatile memory devices has been analyzed, and the current state...
1 October 1999 in Journal of Sol-Gel Science and Technology
The main mechanisms of leakage currents in thin lead zirconate titanate (PZT) ferroelectric films prepared by the sol–gel method are discussed. Four specific regions are determined in I–V dependencies. At very weak fields (10–20 kV/cm), the current falls with the voltage increase as a result of depolarization. In the low fields region (about 70–100 kV/cm), the leakage current decreases with the decrease of voltage ramp speed and its components are the ohmic and displacement currents. In the high fields region (≥130 kV/cm), the leakage current increases with the decrease of step voltage ramp in contrast to the previous case. Possible conductivity mechanisms are the Poole– Frenkel emission and hopping conduction. In the transition region between above-mentioned ones (from 80–90 to ∼130 kV/cm), an abrupt unstable increase of current is observed caused by breakdown of reverse bias Schottky barrier. Depolarization currents are studied for sol–gel PZT films prepared at different preparation conditions.