Mohammad bod

Dr. Mohammad bod

Electrical Engineering, Shahid Rajaee Teacher Training University, Tehran, Tehrān, Iran
orcid

Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
14 June 2019 in IET Microwaves, Antennas & Propagation
Verified
Journal Article
Open access
PDF file
Mohammad bodMohammad bod
Mohammad bod
MAMehdi Ahmadi‐Boroujeni
Mehdi Ahmadi‐Boroujeni
KMKarim Mohammadpour‐Aghdam
Karim Mohammadpour‐Aghdam
This study describes the concept and design of a low‐cost super broadband dipole antenna with a passive matching network. The proposed dipole antenna is designed in three steps. First, a simple planar dipole antenna with six different loads and a balanced to unbalanced (Balun) transformer is designed by the genetic algorithm optimisation. The position and value of the loads are optimised to achieve an acceptable radiation pattern and voltage standing wave ratio (VSWR) over the desired frequency bandwidth. In the next step, the shape of the printed strip dipole antenna is optimised to improve the frequency response of the designed antenna. Finally, an LC network is added to the antenna feed point to reduce the antenna VSWR at low frequencies. The final dipole antenna has a length of 1.7 m and can operate over 30–1200 MHz with VSWR ˂3 and broadside gain >−10 dBi. The proposed antenna can easily be fabricated at a low cost via the printed circuit board technology. An industrial prototype of the proposed antenna is fabricated and measured. A good agreement between measurement and simulation results is observed.

1 November 2016 in AEU - International Journal of Electronics and Communications
Verified
Journal Article
Closed access
Mohammad bodMohammad bod
Mohammad bod
MAMehdi Ahmadi-Boroujeni
Mehdi Ahmadi-Boroujeni
KMKarim Mohammadpour-Aghdam
Karim Mohammadpour-Aghdam

4 June 2021 in IEEE Transactions on Plasma Science
Verified
Journal Article
Closed access
EKEhsan Koohkan
Ehsan Koohkan
SJSaughar Jarchi
Saughar Jarchi
AGAyaz Ghorbani
Ayaz Ghorbani
Mohammad bodMohammad bod
Mohammad bod
Orbital angular momentum (OAM) is a promising feature of electromagnetic (EM) wave to increase the communication link capacity. It is possible to use the OAM over the whole spectrum from radio frequency to optic. EM waves would experience a vortex phase boundary while transmitting the data. According to the infinite number of vortex modes, there would be infinite data transmission in theory. Here, a plasma medium with a complex structure is exploited to construct the vortex phase plane at microwave frequencies. Plasma as the ionized gas transmits, reflects, and absorbs EM wave under some conditions. The ratio of plasma physical parameters with the impinging wave frequency presents the condition of wave interaction with the plasma medium. A reflector plane is realized with the help of multilayered low-pressure plasma. By radiation of a plane wave toward the reflector surface, vortex beams of several modes are realized. The controllability of plasma electron frequency makes it a reconfigurable reflect-array antenna for vortex beam generation. The design is based on the scattering theory of the dielectric plasma model for a vast frequency of 8-16 GHz. The proposed advanced EM structure to generate the vortex beams is simulated with a full-wave analysis that verifies the studied design.

30 March 2021 in Microwave and Optical Technology Letters
Verified
Journal Article
Closed access
PDF file
EKEhsan Koohkan
Ehsan Koohkan
SJSaughar Jarchi
Saughar Jarchi
AGAyaz Ghorbani
Ayaz Ghorbani
Mohammad bodMohammad bod
Mohammad bod

1 January 2014 in IET Microwaves, Antennas & Propagation
Verified
Journal Article
Open access
PDF file
AMAli Reza Mallahzadeh
Ali Reza Mallahzadeh
Mohammad bodMohammad bod
Mohammad bod
A novel method for designing a compact low‐pass filter (LPF) with a sharp cut‐off and wide stop‐band is presented. In this technique, a simple open‐stub microstrip line is printed on top of a substrate and the desired performance is obtained by optimising the shape of the defected ground structure using the genetic algorithm. Details of the design procedure are presented and evaluated through designing two different LPFs. The first LPF is optimised for a 3.5 GHz cut‐off frequency and a stop‐band up to 10 GHz, whereas the second one is optimised for a 5 GHz cut‐off frequency and the stop‐band is extended to 16 GHz. Both filters are fabricated and good agreement between simulation and measurement result is obtained. The designed filters have a sharp transition along with a compact size of 25 × 20 × 0.787 mm 3 .

25 October 2022 in IEEE Antennas and Wireless Propagation Letters
Verified
Journal Article
Closed access
EKEhsan Koohkan
Ehsan Koohkan
SJSaughar Jarchi
Saughar Jarchi
AGAyaz Ghorbani
Ayaz Ghorbani
Mohammad bodMohammad bod
Mohammad bod
In this paper, a helical slot antenna for generating multiple orbital angular momentum (OAM) modes is proposed. The proposed antenna consists of four concentric helical slot array antennas, which are excited by an annular microstrip line. The number of each helical slot, and length of microstrip feed are chosen to create circularly polarized OAM modes of 0, −1, −2, and −3 at 3.5 GHz frequency with more than 10% fractional bandwidth. The final multimode antenna has 89mm in diameter and 19.1mm in height. A prototype of the proposed compact antenna is fabricated. From the simulation and measurement results, prominent spiral phase planes are observed at all antenna ports. Both the measurement and simulation results show that the proposed compact antenna has valuable features to produce different vortex modes.