A novel synthesis of a nanometric MCM-41 from biogenic silica obtained from rice husk is here presented. CTABr and Pluronic F127 surfactants were employed as templating agents to promote the formation of a long-range ordered 2D-hexagonal structure with cylindrical pores and to limit the particle growth at the nanoscale level thus resulting in a material with uniform particle size of 20–30 nm. The physico-chemical properties of this sample (RH-nanoMCM) were investigated through a multi-technique approach, including PXRD, 29Si MAS NMR, TEM, Z-potential and N2 physisorption analysis at 77 K. The results were compared to those of a nanometric MCM-41 synthesized from a silicon alkoxide precursor. The adsorption capacity of RH-nanoMCM towards the cationic dye rhodamine B from aqueous phase was investigated at different initial dye concentrations by means of UV-vis spectroscopy. Insight into the non-covalent interactions between the dye molecules and the adsorbent surface was gained by means of 1H and 13C MAS NMR spectroscopy and FT-IR spectroscopy.
This manuscript deals with the synthesis of different types of zeolites from natural kaolinite samples for CO2 adsorption. A zeolite A was prepared from kaolinite by means of an alkaline fusion process, followed by hydrothermal treatment, whereas a highly crystalline zeolite X was synthesized by optimizing the previously mentioned synthetic procedure. In detail, the SiO2/Al2O3 molar ratio in the preliminary mixture was modified with the addition of a secondary silicon source (sodium silicate) in order to obtain the one required for zeolites X. The physicochemical properties of the pristine clay and of the different zeolites were investigated by means of a multi-technique approach, including XRPD; SEM-EDX; 23Na, 27Al and 29Si MAS NMR spectroscopy; and N2 physisorption analysis at 77 K. Since the Si and Al molar ratios and reactivities are key parameters for the synthesis of zeolites, these aspects, primarily related to the use of a naturally occurring aluminosilicate as the raw material, have been investigated for their correlation with the physicochemical properties of the synthetic products. Moreover, by means of a custom-built volumetric apparatus, the CO2 adsorption capacity of the resulting zeolites at low gas pressures (<1 bar) and at 25 °C was assessed.
This manuscript deals with the thermal and chemical modification of a natural kaolinite that shows excellent performance in the capture of a cationic organic pollutant from the aqueous phase. Kaolinite was calcined at 700 °C and treated with HCl to remove aluminium and to obtain a siliceous material. The structural changes and the physico-chemical properties of the materials at different stages of thermal and chemical modification were investigated with several techniques, including XRPD, MAS-NMR, SEM-EDX, FT-IR, and N2 physisorption at 77 K. The ability of the parent kaolinite and siliceous material to capture the organic dye, Rhodamine B, from the aqueous phase was investigated by means of UV-Vis spectroscopy. The siliceous material exhibited better adsorption capacity with respect to the parent kaolinite. Finally, the functional stability of the siliceous material was tested over three cycles of regeneration and adsorption.
Pharmaceutical active compounds, including hundreds of different substances, are counted among the emerging contaminants in waterbodies, whose presence raises a growing concern for the ecosystem. Drugs are metabolized and excreted mainly through urine as an unchanged active ingredient or in the form of metabolites. These emerging contaminants are not effectively removed with the technologies currently in use, making them a relevant environmental problem. This study proposes the treatment of urine and water at the source that can allow an easier removal of dissolved drugs and metabolites. The treatment of synthetic urine, with dissolved ibuprofen as a model compound, by adsorption, using various classes of inorganic materials, such as clays, hierarchical zeolites and ordered mesoporous silica (MCM-41), is presented. A multi-technique approach involving X-ray powder diffraction, solid-state NMR, UV-Vis and Raman spectroscopies was employed to investigate the adsorption process in inorganic adsorbents. Moreover, the uptake, the ensuing competition, the efficiency and selectivity as well as the packing of the model compound in ordered mesoporous silica during the incipient wetness impregnation process were all thoroughly monitored by a novel approach, involving combined complementary time-resolved in situ 1H and 13C MAS NMR spectroscopy as well as X-ray powder diffraction.