Limited research exists on wood properties in E. nitens × E. globulus hybrid genotypes grown in water-limited conditions generated by the climate change influence in Mediterranean areas. The EUCAHYDRO project aimed to assess environmental stress impacts on eucalyptus genotypes, including responses to reduced water availability, and to evaluate wood density and resistance using the non-destructive drill resistance technique. This study focused on 10-year-old E. nitens × E. globulus hybrids and Eucalyptus badjensis Beuzev. & Welch, revealing that low irrigation led to a 13% (p < 0.05) decrease in diameter and a 6.5% (p > 0.05) increase in wood density for the hybrids. On the contrary, E. badjensis demonstrated a noteworthy 22% increase in wood density (p < 0.05), while showing a corresponding 0.6% growth increase (p > 0.05), as measured by the diameter at breast height. Drill resistance measurement results indicated that E. nitens × E. globulus’ amplitude ranged from 20.1% to 26.6%, while E. badjensis’ ranged from 20.8% to 27.2%. The study revealed a high correlation between resistance amplitude and wood density, with coefficients of 0.97 observed for E. nitens × E. globulus and 0.84 for E. badjensis (p < 0.05). These findings fall within the range reported in similar studies involving Eucalyptus spp. The primary focus of the research was to assess the growth potential and wood quality of novel Eucalyptus spp. under conditions of water limitation. The study also explored the utility of drill resistance as a predictive measure for evaluating wood density as an indicator of wood quality.
Commercial forest plantations in Chile are dominated by pine (Pinus radiata) and eucalyptus (Eucalyptus globulus). Tree bark is the main by-product of the forestry industry and has low value, but great potential for use as an agricultural substrate. However, the direct use of bark fibers may cause plant phytotoxicity due to the presence of polyphenolic and other compounds. This study aims to evaluate the physicochemical properties of E. globulus and P. radiata bark after water extraction treatments. The phytotoxicity of the resulting extracted bark alone and that mixed with commercial substrates (coconut fiber, moss, peat, and composted pine) at different ratios (25 to 75 wt%) were assessed using the Munoo-Liisa vitality index (MLVI) test. For all treatments, the seed germination and growth of radish (Raphanus sativus) and Chinese cabbage (Brassica rapa) species were evaluated and compared to a commercial growing medium (peat) as a control. The optimal mixture for seed growth was determined to be 75% extracted E. globulus bark fiber and 25% commercial substrates such as peat (P), coconut fiber (C), moss (M), and composted pine (CP), as indicated by the MLVI and germination results. Two phytostimulant products, chitosan and alginate-encapsulated fulvic acid, were added to the best substrate mixture, with the purpose of improving their performance. Encapsulated fulvic acid at 0.1% w/v was effective in promoting plant growth, while chitosan at all of the concentrations studied was effective only for mixture 75E-25CP. The mixture of E. globulus fiber and commercial substrates, containing a high proportion of water-extracted fiber (75%), shows the potential to be used in the growth of horticultural crops and in the plant nursery industry.
2 September 2020 in Biomass Conversion and Biorefinery
Pinus radiata D. Don is the most widely planted forest species in Chile, making it crucial to understand carbon pools in adult plantations. This study aimed to evaluate the effect of soil type and site productivity on the total carbon stock in adult radiata pine plantations, considering sites with contrasting water and nutrient availability. We selected 10 sites with sandy and recent volcanic ash soils, representing a productivity gradient. At each site, three 1000 m2 plots were established to quantify the carbon stock of total biomass using allometric equations and in situ carbon assessments of the forest floor and mineral soil (up to 1 m deep). The results indicated significantly higher carbon stocks in the mineral soil of recent ash sites (281.4 Mg ha⁻1) compared to sandy soils (139.9 Mg ha⁻1). The total site carbon was also higher in recent ash (473.2 Mg ha⁻1) than in sandy sites (330.9 Mg ha⁻1). A significant relationship was found between stand productivity and soil organic carbon (r2 = 0.88), as well as total carbon stock (r2 = 0.91) when considering soil type. These findings highlight the importance of including assessments up to 1 m depth and developing soil type and productivity models to improve site carbon stock estimates.
The relationship between stand cumulative production at harvesting age and carbon stock for different soil types in forest plantations is critical for sustainable forest management and climate change mitigation. This study evaluated carbon stocks in Pinus radiata D. Don on granitic and metamorphic soils in central Chile. We selected 10 plantations and established three 1000 m2 stands per plantation to quantify the carbon stock of total biomass using allometric equations and in situ carbon assessments of the forest floor and mineral soil (up to 1 m deep). A strong positive correlation was observed between stand cumulative production at harvesting age and total carbon stock (r2 = 0.767), regardless of the soil type. Metamorphic and granitic soils demonstrated a high carbon stock capacity, particularly in deeper soil layers (40–100 cm), with soil contributing over 40% of the total soil carbon stock. Soil bulk density and carbon concentration were strongly correlated (r2 = 0.74), emphasizing the role of soil physical properties in carbon storage at deep soil horizons. These findings highlight the critical role of subsoils as carbon reservoirs. Predictive linear models developed from this study offer a useful and simple approach for estimating carbon stocks, contributing to national carbon neutrality goals and sustainable forest management.