An oblique detonation wave in two-phase kerosene–air mixtures over a wedge is numerically studied for the first time. The features of initiation and stabilisation of the two-phase oblique detonation are emphasised, and they are different from those in previous studies on single-phase gaseous detonation. The gas–droplet reacting flow system is solved by means of a hybrid Eulerian–Lagrangian method. The two-way coupling for the interphase interactions is carefully considered using a particle-in-cell model. For discretisation of the governing equations of the gas phase, a WENO-CU6 scheme (Hu et al., J. Comput. Phys., vol. 229 (23), 2010, pp. 8952–8965) and a sixth-order compact scheme are employed for the convective terms and the diffusive terms, respectively. The inflow parameters are chosen properly from real flight conditions. The fuel vapour, droplets and their mixture are taken as the fuel in homogeneous streams with a stoichiometric ratio, respectively. The effects of evaporating droplets and initial droplet size on the initiation, transition from oblique shock to detonation and stabilisation are elucidated. The two-phase oblique detonation wave is stabilised from the oblique shock wave induced by the wedge. As the mass flow rate of droplets increases, a shift from a smooth transition with a curved shock to an abrupt one with a multi-wave point is found, and the initiation length of the oblique detonation increases, which is associated with the increase of the transition pressure. By increasing the initial droplet size, a smooth transition pattern is observed, even if the equivalence ratio remains constant, and the transition pressure decreases. The factor responsible is incomplete evaporation before the detonation fronts, which results in a complicated flame structure, including regimes of formation of oblique detonation, evaporative cooling of droplets and post-detonation reaction.

Detonation is a promising combustion mode to improve engine performance, increase combustion efficiency, reduce emissions, and enhance thermal cycle efficiency. Over the last decade, significant progress has been made towards the applications of detonation mode in engines, such as standing detonation engine (SDE), Pulse detonation engine (PDE) and rotating detonation engine (RDE), and the understanding of the fundamental chemistry and physics processes in detonation engines via experimental and numerical studies. This article is to provide a comprehensive overview of the progress in the knowledge of rotating detonation engine from the different countries. New observations of injection, ignition, and geometry of combustor, pressure feedback, and combustion modes of RDE have been reported. These findings and advances have provided new opportunities in the development of rotating detonation for practical applications. Finally, we point out the current gaps in knowledge to indicate which areas future research should be directed at.

The analysis on the interactions of a large-scale shearing vortex, an incident oblique shock wave, and a chemical reaction in a planar shear layer is performed by numerical simulations. The reacting flows are obtained by directly solving the multi-species Navier-Stokes equations in the Eulerian frame, and the motions of individual point-mass fuel droplets are tracked in the Lagrangian frame considering the two-way coupling. The influences of shock strength and spray equivalence ratio on the shock-vortex interaction and the induced combustion are further studied. Under the present conditions, the incident shock is distorted by the vortex evolution to form the complicated waves including an incident shock wave, a multi-refracted wave, a reflected wave, and a transmitted wave. The local pressure and temperature are elevated by the shock impingement on the shearing vortex, which carries flammable mixtures. The chemical reaction is mostly accelerated by the refracted shock across the vortex. Two different exothermal reaction modes could be distinguished during the shock-vortex interaction as a thermal mode, due to the additional energy from the incident shock, and a local quasi detonation mode, due to the coupling of the refracted wave with reaction. The former mode detaches the flame and shock wave, whereas the latter mode tends to occur when the incident shock strength is higher and local equivalence ratio is higher approaching to the stoichiometric value. The numerical results illustrate that those two modes by shock-vortex interaction depend on the structure of the post-shock flame kernel, which may be located either in the vortex-braids of post-shock flows or in the shock-vortex interaction regime.