Of great importance in materials science is the design of effective functional materials that can be used in various technological fields. Nanomodified materials, which have fundamentally new properties and provide previously unrealized properties, have acquired particular importance. When creating heating elements and materials for deformation measurement, it is necessary to understand the patterns of heat release under conditions of mechanical deformation of the material, as this expands the potential applications of such materials. A study of elastomers modified with multi-walled carbon nanotubes (MWCNTs) has been carried at the MWCNTs concentration of 1–8 wt.%. The modes of heat release of nanomodified elastomers at a voltage of 50 V at different levels of tension are reported. The increment of the MWCNTs concentration to 7 wt.% leads to an increment in the power of heat emissions. It is worth noting the possibility of using the obtained elastomer samples with MNT as sensitive elements of strain sensors, which will allow obtaining information about physical and chemical parameters following the principles of measuring the change in electrical resistance that occurs during stretching and torsion. The changes in conductivity and heat emission under different conditions have been studied in parallel with Raman mapping and infrared thermography. The reported studies allow to make the next step to develop flexible functional materials for the field of electric heating and deformation measurement based on elastic matrices and nanoscale conductive fillers.
Applications of DNA-containing nanomaterials (DNA-NMs) in science and technology are currently attracting increasing attention in the fields of medicine, environment, engineering, etc. Such objects have become important for various branches of science and industries due to their outstanding characteristics such as small size, high controllability, clustering actions, and strong permeability. For these reasons, DNA-NMs deserve a review with respect to their recent advancements. On the other hand, precise cluster control, targeted drug distribution in vivo, and cellular micro-nano operation remain as problems. This review summarizes the recent progress in DNA-NMs and their crossover and integration into multiple disciplines (including in vivo/in vitro, microcircles excisions, and plasmid oligomers). We hope that this review will motivate relevant practitioners to generate new research perspectives and boost the advancement of nanomanipulation.
Technologies for obtaining dosage formulations (DF) for personalized therapy are currently being developed in the field of inkjet (2D) and 3D printing, which allows for the creation of DF using various methods, depending on the properties of pharmaceutical substances and the desired therapeutic effect. By combining these types of printing with smart polymers and special technological approaches, so-called 4D printed dosage formulations are obtained. This article discusses the main technological aspects and used excipients of a polymeric nature for obtaining 2D, 3D, 4D printed dosage formulations. Based on the literature data, the most widely used polymers, their properties, and application features are determined, and the technological characteristics of inkjet and additive 3D printing are shown. Conclusions are drawn about the key areas of development and the difficulties that arise in the search and implementation in the production of new materials and technologies for obtaining those dosage formulations.
Introduction. Silver nanoparticles have unique physicochemical properties and can be used for the diagnosis and treatment of various kinds of infections, oncological diseases, as well as drug delivery. The review presents an analysis of scientific literature on the use of silver nanoparticles for biomedical purposes.Text. The review discusses the perspectives of the silver nanoparticles use in the treatment of oncological diseases as a carrier of drugs, as well as the direct manifestation of their cytotoxic effect on cancer cells. Also, there is considered the use of silver nanoparticles for imparting or enhancing the antibacterial effects of dressings and dental materials. The mechanism of action of silver nanoparticles against viruses is considered. This research presents the use of composite materials containing silver nanoparticles for biomedical purposes.Conclusion. On the basis of the literature data analysis, carried out by the authors, there are shown possibilities of the nanotechnology achievements for the application in medicine.
We recently reported that the restoration of cervical vertebral arterial blood flow access (measured as systolic peak (PS)) to the rhomboid fossa leads to the recovery of the HbA1c level in the case of patients with a pre-Diabetes Mellitus (pre-DM) condition. The theory of centralized aerobic–anaerobic energy balance compensation (TCAAEBC) provides a successful theoretical explanation for this observation. It considers the human body as a dissipative structure. Reported connections between arterial hypertension (AHT) and the level of HbA1c are linked through OABFRH. According to the TCAAEBC, this delivers incorrect information about blood oxygen availability to the cerebellum. The restoration of PS normalizes AHT in 5–6 weeks and HbA1c in 12–13 weeks. In the current study, we demonstrate the model which fits the obtained experimental data. According to the model, pathways of onset and recovery from pre-DM are different. The consequence of these differences is discussed. The great significance of the TCAAEBC for medical practice forces the creation of an appropriate mathematical model, but the required adjustment of the model needs experimental data which can only be obtained from an animal model(s). The essential part of this study is devoted to the analysis of the advantages and disadvantages of widely available common mammalian models for TCAAEBC cases.
1
18 January 2023 in Meditsinskiy sovet = Medical Council
Introduction. COVID-19 increases the risk of ischemic stroke (IS), but the impact of COVID-19 on the recovery period of IS remains poorly understood.The aim of the study – to identify patterns and features of the course and manifestations of the early and late stages of the recovery period after ischemic stroke associated with COVID-19.Materials and methods. The combined retro-prospective study included 81 patients. Patients were divided into three groups: 1) development of stroke followed by outcome in ischemic stroke (IS) associated with COVID-19 (n = 21); 2) COVID-19 infection without stroke (n = 40); 3) development of stroke without COVID-19 (n = 20). All subjects were interviewed by telephone within 12 months from the date of discharge from the hospital. In patients with stroke, the severity of stroke (NIHSS scale), functional status (Rankine scale), and daily activity level (Bartel scale) were studied. All subjects were interviewed by telephone within 12 months from the moment of discharge from the hospital, the following were assessed: complaints, general condition of patients, the patient’s level of activity and ability to self-care, emotional status and the presence of anxiety and depressive disorders. The following were retrospectively assessed: stroke severity, functional status, volume of lung lesions according to MSCT, the presence of cardiovascular diseases, indicators of general and biochemical blood tests, changes in blood levels of cytokines IL-6, IL-8, IL-10, TNF-α.Results. The highest mortality at the post-hospital stage (only 67 and 47% of the total number of deaths) was in patients who had an ischemic stroke associated with COVID-19; half of them were registered in the first 3 months; by the end of the 6th month, this figure was 79%. Deaths in patients with IS due to COVID-19 occur 6 months earlier than in the group of patients with stroke without COVID-19. The leading causes of fatal outcomes in patients with IS due to COVID-19 in the first 3 months were acute myocardial infarction and repeated strokes. A high frequency of unfavorable rehabilitation prognoses and deaths both in the acute period of the disease and at the post-hospital stage was observed in patients with high comorbidity with forms of pathology of the circulatory system.Conclusion. Patients who have had an ischemic stroke associated with COVID-19, in the first 3 months of the post-hospital period, are at an increased risk of developing thrombotic complications and death and require special attention of outpatient doctors in this period after discharge from the hospital.