Hussein Mohamed Hussein Oraby

Dr. Hussein Mohamed Hussein Oraby

Military Technical College, Cairo, Al Qāhirah, Egypt
orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
16 August 2022 in Nanomaterials
Verified
Journal Article
Open access
PDF file
HOHussein Mohamed Hussein Oraby
Hussein Mohamed Hussein Oraby
Hesham Ramzy TantawyHesham Ramzy Tantawy
Hesham Ramzy Tantawy
Miguel A. Correa-DuarteMiguel A. Correa-Duarte
Miguel A. Correa-Duarte
MDMohammad Darwish
Mohammad Darwish
AEAmir Elsaidy
Amir Elsaidy
MSmagdy senna
magdy senna
Electromagnetic interference (EMI) has been recognized as a new sort of pollution and can be considered as the direct interference of electromagnetic waves among electronic equipment that frequently affects their typical efficiency. As a result, shielding the electronics from this interfering radiation has been addressed as critical issue of great interest. In this study, different hybrid nanocomposites consisting of magnetite nanoparticles (Fe3O4) and reduced graphene oxide (rGO) as (conductive/magnetic) fillers, taking into account different rGO mass ratios, were synthesized and characterized by XRD, Raman spectroscopy, TEM and their magnetic properties were assessed via VSM. The acquired fillers were encapsulated in the polyurethane foam matrix with different loading percentages (wt%) to evaluate their role in EMI shielding. Moreover, their structure, morphology, and thermal stability were investigated by SEM, FTIR, and TGA, respectively. In addition, the impact of filler loading on their final mechanical properties was determined. The obtained results revealed that the Fe3O4@rGO composites displayed superparamagnetic behavior and acceptable electrical conductivity value. The performance assessment of the conducting Fe3O4@rGO/PU composite foams in EMI shielding efficiency (SE) was investigated at the X-band (8–12) GHz, and interestingly, an optimized value of SE −33 dBw was achieved with Fe3O4@rGO at a 80:20 wt% ratio and 35 wt% filler loading in the final effective PU matrix. Thus, this study sheds light on a novel optimization strategy for electromagnetic shielding, taking into account conducting new materials with variable filler loading, composition ratio, and mechanical properties in such a way as to open the door for achieving a remarkable SE.

20 October 2025 in Discover Water
Verified
Journal Article
Open access
PDF file
HOHussein Mohamed Hussein Oraby
Hussein Mohamed Hussein Oraby
AEAdel A. Ezz
Adel A. Ezz
GHGhada E. Hegazy
Ghada E. Hegazy
In response to escalating global water scarcity intensifying, especially in arid regions, advanced desalination technologies play a vital role in securing sustainable freshwater sources. This review examines membrane desalination, thermal desalination, electrodialysis, hybrid systems, and microbial desalination cells evaluating their mechanisms, efficiencies, limitations, and practical applications. Membrane-based technologies, particularly reverse osmosis, demonstrate high energy efficiency and widespread adoption, while thermal methods, such as multi-stage flash and multi-effect distillation, remain viable for high-salinity waters despite their energy demands. Electrodialysis shows promise for low-salinity applications, and hybrid systems integrate multiple techniques to enhance performance and energy efficiency. Our analysis highlights key advancements, including improvements in membrane materials, energy recovery systems, and low-energy desalination processes. Economic and environmental assessments reveal that while desalination costs are decreasing, challenges remain in brine disposal, energy consumption, and infrastructure requirements. Visual representations illustrate efficiency trends, cost comparisons, and potential innovations shaping the future of desalination. By providing a comprehensive understanding of these technologies, this review aims to guide future research and policy decisions toward more sustainable and accessible freshwater solutions.

23 March 2024 in SPE Polymers
Verified
Journal Article
Open access
PDF file
HOHussein Mohamed Hussein Oraby
Hussein Mohamed Hussein Oraby
MDMohammad Darwish
Mohammad Darwish
MSmagdy senna
magdy senna
Hesham Ramzy TantawyHesham Ramzy Tantawy
Hesham Ramzy Tantawy
The expanded graphite (EG) was used as a filler in EG/polyurethane (PU) composite foams for electromagnetic interference shielding (EMI). The EG/PU composite foams were characterized by Fourier transform infrared spectroscopy (FTIR) and SEM. The shielding effectiveness (SE) of the EG/PU composite form containing 5 wt% EG was −24 dB at 5 wt% in the 8–12 GHz range. The optimal EG loading was 3 wt% and the corresponding EG/PU composite foam had a total SE of −18.9 dB and fairly good mechanical characteristics (compressive strength: 13.43 MPa and compressive modulus: 4.95 MPa). These attributes position the EG/PU composite foam as a promising candidate for diverse EMI SE applications.Highlights: Synthesis by thermal exfoliation and characterization by x‐ray diffraction, Raman and SEM of EG. Preparation of EG/PU foams for enhanced EMI SE. Optimization of the EG loading with regard to SE and mechanical properties of the EG/PU foams.

29 November 2025 in Scientific Reports
Verified
Journal Article
Open access
PDF file
MSMohamed Shoaib
Mohamed Shoaib
RHReham Helal
Reham Helal
YAYasser K. Abdel-Monem
Yasser K. Abdel-Monem
FAFarag A. Ali
Farag A. Ali
HOHussein Mohamed Hussein Oraby
Hussein Mohamed Hussein Oraby
MSMagdy M. H. Senna
Magdy M. H. Senna
Poly vinyl alcohol/xanthan gum (PVA/XG) blend films were fabricated via solution casting and then exposed to various doses of electron beam (EB) irradiation. The results indicated that the EB treatment has been significantly modified the structural and mechanical properties of the blends compared to pristine PVA. Fourier-transform infrared (FTIR) spectroscopy indicated the formation of hydrogen bonding and enhanced the interfacial adhesion and compatibility between the components. These findings were further supported by scanning electron microscopy (SEM) and tensile testing. Notably, the irradiated PVA/XG films exhibited rapid color changes in response to fish spoilage, highlighting their potential as reliable, antimicrobial-resistant freshness indicators for food packaging applications.

9 September 2024 in Scientific Reports
Verified
Journal Article
Open access
PDF file
GHGhada E. Hegazy
Ghada E. Hegazy
MMMadelyn N. Moawad
Madelyn N. Moawad
SOSarah Samir Othman
Sarah Samir Othman
NSNadia A. Soliman
Nadia A. Soliman
AEAbdelwahab Abeer E
Abdelwahab Abeer E
YAYasser R. Abdel–Fattah
Yasser R. Abdel–Fattah
Halophilic archaea are a unique group of microorganisms that thrive in high–salt environments, exhibiting remarkable adaptations to survive extreme conditions. Archaeological wood and El–Hamra Lake serve as a substrate for a diverse range of microorganisms, including archaea, although the exact role of archaea in archaeological wood biodeterioration remains unclear. The morphological and chemical characterizations of archaeological wood were evaluated using FTIR, SEM, and EDX. The degradation of polysaccharides was identified in Fourier transform infrared analysis (FTIR). The degradation of wood was observed through scanning electron microscopy (SEM). The energy dispersive X–ray spectroscopy (EDX) revealed the inclusion of minerals, such as calcium, silicon, iron, and sulfur, into archaeological wood structure during burial and subsequent interaction with the surrounding environment. Archaea may also be associated with detected silica in archaeological wood since several organosilicon compounds have been found in the crude extracts of archaeal cells. Archaeal species were isolated from water and sediment samples from various sites in El–Hamra Lake and identified as Natronococcus sp. strain WNHS2, Natrialba hulunbeirensisstrain WNHS14, Natrialba chahannaoensis strain WNHS9, and Natronococcus occultus strain WNHS5. Additionally, three archaeal isolates were obtained from archaeological wood samples and identified as Natrialba chahannaoensisstrain W15, Natrialba chahannaoensisstrain W22, and Natrialba chahannaoensisstrain W24. These archaeal isolates exhibited haloalkaliphilic characteristics since they could thrive in environments with high salinity and alkalinity. Crude extracts of archaeal cells were analyzed for the organic compounds using gas chromatography–mass spectrometry (GC–MS). A total of 59 compounds were identified, including free saturated and unsaturated fatty acids, saturated fatty acid esters, ethyl and methyl esters of unsaturated fatty acids, glycerides, phthalic acid esters, organosiloxane, terpene, alkane, alcohol, ketone, aldehyde, ester, ether, and aromatic compounds. Several organic compounds exhibited promising biological activities. FTIR spectroscopy revealed the presence of various functional groups, such as hydroxyl, carboxylate, siloxane, trimethylsilyl, and long acyl chains in the archaeal extracts. Furthermore, the archaeal extracts exhibited antioxidant effects. This study demonstrates the potential of archaeal extracts as a valuable source of bioactive compounds with pharmaceutical and biomedical applications.

12 May 2026 in Journal of Applied Polymer Science
Verified
Journal Article
Closed access
HOHussein Mohamed Hussein Oraby
Hussein Mohamed Hussein Oraby
MDMohammad Darwish
Mohammad Darwish
MSMagdy H. Senna
Magdy H. Senna
AEAdel A. Ezz
Adel A. Ezz
Hesham Ramzy TantawyHesham Ramzy Tantawy
Hesham Ramzy Tantawy
1