sami tabsh

Dr. sami tabsh

American University of Sharjah, Sharjah city, United Arab Emirates
orcid

Research Focus & Metrics

Academic Career Length

36Years (1991-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 February 2009 in Construction and Building Materials
Verified
Journal Article
Closed access
sami tabshsami tabsh
sami tabsh
AAAkmal S. Abdelfatah
Akmal S. Abdelfatah

1 August 1991 in Journal of Structural Engineering
Verified
Journal Article
Closed access
sami tabshsami tabsh
sami tabsh
ANAndrzej S. Nowak
Andrzej S. Nowak
Reliablity procedures are developed for girder bridges. Load models are based on the available statistical data. The derivation of load models is described in other papers. Resistance models are developed by simulations using the available test results for materials and components. The girder behavior is described by a moment curvature relationship. Bridge capacity is determined in terms of the maximum truck load before failure. The analysis is performed for a single unit truck, a semitrailer, and combinations of these trucks. For a given truck position, the load is gradually increased until the deformation (maximum deflection) exceeds the critical level. The developed resistance models are used in the reliability analysis. Reliability indices are calculated for noncomposite and composite steel girders, reinforced concrete T‐beams, and prestressed concrete girders. The calculations are performed for girders and structural systems. Reliability indices for the system are higher than for girders. The effect ...

1 February 2001 in Journal of Bridge Engineering
Verified
Journal Article
Closed access
sami tabshsami tabsh
sami tabsh
MTMuna Tabatabai
Muna Tabatabai
A significant challenge facing motor carriers and engineers in this nation is the limitation of vehicle size and weight based on pavement and bridge capacity. However, the current demands of society and industry occasionally require a truck to carry a load that exceeds the size and weight of the legal limit. In these cases, engineering analysis is required before a permit is issued to ensure the safety of the structures and roadways on the vehicle's route. A truck with a wheel gauge larger than the standard 1.83 m (6 ft) gauge requires additional engineering effort because the wheel load girder distribution factors (GDFs) established by AASHTO cannot be used to accurately estimate the live load in the girders. In this study, the finite-element method is used to develop modification factors for the AASHTO flexure and shear GDFs to account for oversized trucks. The results of the analysis showed that the use of the proposed modification factors with the specification-based GDFs can help increase the allowab...

28 September 2023 in Sustainability
Verified
Journal Article
Open access
PDF file
WAWisam J. Abushama
Wisam J. Abushama
Adil Al-TamimiAdil Al-Tamimi
Adil Al-Tamimi
sami tabshsami tabsh
sami tabsh
Magdi El-EmamMagdi El-Emam
Magdi El-Emam
AIAhmad Ibrahim
Ahmad Ibrahim
TATaghreed Khaleefa Mohammed Ali
Taghreed Khaleefa Mohammed Ali
In this research, the possibility of making eco-friendly concrete from available materials in the local United Arab Emirates (UAE) market was investigated. Supplementary cementitious materials, such as ground granulated blast-furnace slag (GGBS) and silica fume (SF), were utilized for decreasing the cement quantity, enhancing the particle size distribution and improving packing. In sum, 130 concrete specimens—cubes, cylinders, and prisms—from 10 different concrete mixes were tested to determine the enhancement levels in the fresh and hard properties of new concrete. The results showed the improved particle packing of the concrete, especially within the region of sizes 100–10,000 microns, produced by the Elkem Materials Mix Analyser (EMMA), closely matching the Andreassen theoretical model. The green concrete incorporating SF and GGBS possessed air content in the range 1.0–1.4% and compressive strength that is on average 11% higher than the well-packed concrete that did not contain SF or GGBS. Compared to the ACI 318 code’s predictions, the experimental findings of the optimally packed concrete’s moduli of rupture and elasticity were under-estimated by 55–69% and 0.8–8.8%, respectively. The rapid chloride permeability test (RCPT) showed results as low as 392 coulombs for mixes with supplementary cementitious materials, indicating very low chloride permeability. Microstructural analysis using a scanning electron microscope (SEM) demonstrated that concrete with supplementary materials has fewer voids, more homogeneous integration of ingredients, and an abundance of C-S-H products that supported the RCPT findings and tests of mechanical properties. The study demonstrated a significant decrease in carbon dioxide (CO2) emissions of concrete utilizing GGBS and SF and the financial feasibility of eco-friendly concrete in the UAE.

1 January 2003 in Engineering Structures
Verified
Journal Article
Closed access
MOM. O’neill
M. O’neill
sami tabshsami tabsh
sami tabsh
HSH. Sarhan
H. Sarhan

30 August 2022 in Sustainability
Verified
Journal Article
Open access
PDF file
sami tabshsami tabsh
sami tabsh
YAYazan Alhoubi
Yazan Alhoubi
In this study, locally produced recycled fine aggregate from concrete demolition waste was investigated for potential replacement of sand in new concrete mixes. Tests for the waste material included visual examination, chemical composition, grain size distribution, specific gravity, and fineness modulus. Tests on the incorporated recycled fine aggregate in new concrete mixes involved tests of the hardened plain concrete product. In total, eight concrete mixes were considered, of which four had low cement content with 30 MPa target strength, and the other four had high cement content with 55 MPa target strength. For each cement content, the four concrete mixes incorporated fine aggregate replacement ratios of 0% (control), 25%, 50%, and 100%. The hardened concrete tests involved cubes, cylinders, and prisms. The tests addressed compressive strength, tensile strength, and modulus of rupture in accordance with the relevant ASTM standards. In all cases, the average of two tested samples at the age of 28 days was considered. Results of the study showed that the recycled fine aggregate has some cementitious properties, which is capable of hardening when mixed with water and left to dry, even without adding cement from exterior sources. All tested concrete specimens made with recycled fine aggregate exhibited compressive and tensile strengths at least equal to 75% that of the control specimens that contained natural fine aggregate. However, for concrete mixes utilizing low cement content that can yield a compressive strength around 30 MPa with natural aggregate, replacement of 25% or 100% of the natural fine aggregate by weight with locally produced recycled fine aggregate from crushed old concrete can match and often exceeds the compressive and tensile strength of concrete made with virgin aggregate.