Zhijun Guo

Prof. Zhijun Guo

Henan University of Science and Technology, Luoyang, Henan, China

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 July 2022 in Agriculture
Verified
Journal Article
Open access
PDF file
YQYiqing Qiu
Yiqing Qiu
ZGZhijun Guo
Zhijun Guo
XJXin Jin
Xin Jin
PZPangang Zhang
Pangang Zhang
SSShengjie Si
Shengjie Si
FGFugui Guo
Fugui Guo
To obtain the discrete element simulation model parameters suitable for the interaction between cinnamon soil and soil-engaging components, the Hertz–Mindlin with JKR contact model in EDEM simulation software was used to calibrate the relevant model parameters of cinnamon soil. Firstly, the particle size distribution, moisture content, volume density, Poisson’ s ratio, shear modulus, and other parameters of the cinnamon soil were measured with cinnamon soil as the research object. Further, taking the stacking angle as the response value, the Plackett–Burman test, the steepest climbing test, and the Box–Behnken were designed by using the Design-Expert software to calibrate and optimize the physical parameters of soil simulation. The optimal parameter combination was obtained: cinnamon soil–cinnamon soil rolling friction coefficient was 0.08, soil JKR surface energy was 0.37 J/m−2, and cinnamon soil–steel static friction coefficient was 0.64. Finally, the discrete element simulation verification test of stacking angle and cutting resistance was carried out under the calibrated parameters. The comparative calculation showed that the relative error between the simulated stacking angle and the measured stacking angle was 0.253%, and the maximum relative error between the simulated cutting resistance and the measured cutting resistance was 10.32%, which was within the acceptable range, indicating the high accuracy and reliability for the calibration parameters. The research results have important reference value for the energy-saving and consumption-reducing design of soil tillage components and provide basic data for the simulation of cutting resistance research of cinnamon-soil-engaging components.

12 December 2022 in Biomimetics
Verified
Journal Article
Open access
PDF file
FZFu Zhang
Fu Zhang
YQYubo Qiu
Yubo Qiu
STShuai Teng
Shuai Teng
XCXiahua Cui
Xiahua Cui
XWXinyue Wang
Xinyue Wang
SFSanling Fu
Sanling Fu
To solve the technical problem that wheeled vehicles are prone to skidding on complex ground, due to poor adhesion performance, a tire-tread-structure design method based on the bionic principle is proposed in this paper. The 3D model of a goat’s foot was obtained using reverse engineering technology, and the curve equation was fitted by extracting the contour data of its outer-hoof flap edge, which was applied to the tire-tread-structure design. The bionic and herringbone-pattern rubber samples were manufactured, and a soil-tank test was carried out using an electronic universal tensile-testing machine, in order to verify the simulation results. The results showed that the overall adhesion of the bionic tread-pattern was greater than that of the normal tread-pattern with the same load applied and the same height and angle of the tread-pattern structure, and the maximum adhesion was increased by 14.23%. This research will provide a reference for optimizing the pattern structure and thus improving the passing performance of wheeled vehicles.

9 October 2021 in Coatings
Verified
Journal Article
Open access
PDF file
JWJiajia Wang
Jiajia Wang
WJWen Feng Jia
Wen Feng Jia
FZFu Zhang
Fu Zhang
XMXiqiang Ma
Xiqiang Ma
ZQZhaomei Qiu
Zhaomei Qiu
YZYakun Zhang
Yakun Zhang
The necks of birds that possess complex structures, graceful curves, and flexible movements are perfect natural motion actuators. Studying their structural features, mechanic characteristics, and motion rules can provide valuable references for imitating such actuators and motion functions artificially. Previous studies have analyzed the influence of two-dimensional motion geometric features and anatomical structure of the neck on motion efficiency and motion stability. However, the mechanism of motion flexibility from the perspective of neck structure has not been investigated. This study investigates the general law of the relationship between the structural parameters and motion characteristics of birds’ necks using tomography technology and 3D reconstruction technology. The results show that the structural characteristics of geese and ducks are similar, and there are significant differences in joint motion characteristics. Geese obtains complex neck postures through active intervertebral joints and highly flexible facet joints and possesses higher neck flexibility than ducks. This study provides a generic measuring method for obtaining birds’ cervical spinal vertebral structural dimensional parameters and offers a new theoretical concept for bionic robotic structural design and manufacture.

28 October 2022 in Biomimetics
Verified
Journal Article
Open access
PDF file
FZFu Zhang
Fu Zhang
XCXiahua Cui
Xiahua Cui
SWShunqing Wang
Shunqing Wang
HSHaoxuan Sun
Haoxuan Sun
JWJiajia Wang
Jiajia Wang
ZGZhijun Guo
Zhijun Guo
In order to improve the slope movement stability and flexibility of quadruped robot, a theoretical design method of a flexible spine of a robot that was based on bionics was proposed. The kinematic characteristics of the spine were analyzed under different slopes with a Saanen goat as the research object. A Qualisys track manager (QTM) gait analysis system was used to obtain the trunk movement of goats under multiple slopes, and linear time normalization (LTN) was used to calibrate and match typical gait cycles to characterize the goat locomotion gait under slopes. Firstly, the spatial angle changes of cervical thoracic vertebrae, thoracolumbar vertebrae, and lumbar vertebrae were compared and analyzed under 0°, 5°, 10°, and 15° slopes, and it was found that the rigid and flexible coupling structure between the thoraco–lumbar vertebrae played an obvious role when moving on the slope. Moreover, with the increase in slope, the movement of the spine changed to the coupling movement of thoraco–lumbar coordination movement and a flexible swing of lumbar vertebrae. Then, the Gaussian mixture model (GMM) clustering algorithm was used to analyze the changes of the thoraco–lumbar vertebrae and lumbar vertebrae in different directions. Combined with anatomical knowledge, it was found that the motion of the thoraco–lumbar vertebrae and lumbar vertebrae in the goat was mainly manifested as a left–right swing in the coronal plane. Finally, on the basis of the analysis of the maximin and variation range of the thoraco–lumbar vertebrae and lumbar vertebrae in the coronal plane, it was found that the coupling motion of the thoraco–lumbar cooperative motion and flexible swing of the lumbar vertebrae at the slope of 10° had the most significant effect on the motion stability. SSE, R2, adjusted-R2, and RMSE were used as evaluation indexes, and the general equations of the spatial fitting curve of the goat spine were obtained by curve fitting of Matlab software. Finally, Origin software was used to obtain the optimal fitting spatial equations under eight movements of the goat spine with SSE and adjusted-R2 as indexes. The research will provide an idea for the bionic spine design with variable stiffness and multi-direction flexible bending, as well as a theoretical reference for the torso design of a bionic quadruped robot.

Verified
Journal Article
Open access
PDF file
ZGZhijun Guo
Zhijun Guo
MPMingtian Pang
Mingtian Pang
SYShiwen Ye
Shiwen Ye
YGYangyang Geng
Yangyang Geng
To enhance the precision and real-time performance of trajectory tracking control in differential-steering intelligent sweeping robots and to improve the adaptability of the control algorithm to errors caused by sensor noise, tire slip, and skid, an MPC-PID (Model Predictive Control–Proportional-Integral-Derivative) dual closed-loop control strategy was proposed. This strategy integrates a Kalman filter-based state estimator and a sliding compensation module. Based on the kinematic model of the intelligent sweeping robot, a model predictive controller (MPC) was designed to regulate the vehicle’s pose, while a PID controller was used to adjust the longitudinal speed, forming a dual closed-loop control algorithm. A Kalman filter was employed for state estimation, and a sliding compensation module was introduced to mitigate wheel slip and lateral drift, thereby improving the stability of the control system. Simulation results demonstrated that, compared to traditional MPC control, the maximum lateral deviation, maximum heading angle deviation, and speed response time were reduced by 50.83%, 53.65%, and 7.10%, respectively, during sweeping operations. In normal driving conditions, these parameters were improved by 41.58%, 45.54%, and 24.17%, respectively. Experimental validation on an intelligent sweeper platform demonstrates that the proposed algorithm achieves a 16.48% reduction in maximum lateral deviation and 9.52% faster speed response time compared to traditional MPC, effectively validating its enhanced tracking effectiveness in intelligent cleaning operations.

18 April 2025 in Biomimetics
Verified
Journal Article
Open access
PDF file
SFSanling Fu
Sanling Fu
XCXiahua Cui
Xiahua Cui
LYLe Yang
Le Yang
XWXinyue Wang
Xinyue Wang
ZGZhijun Guo
Zhijun Guo
FZFu Zhang
Fu Zhang
Goats can walk freely and flexibly in complex environments such as concave and convex or soft ground. And their flexible spine has functions such as adjusting balance and providing auxiliary power during movement, while the limbs only have support functions. The spine has an adjustable and decisive role in the pressure on the sole of the hoof of the goat. Therefore, the goat spine was taken as the bionic prototype, the three-dimensional force distribution of the goat body space was analyzed, and the optimal spinal space curve was explored, combined with the goat gait cycle. Based on the study of spinal curve arrangement and placement, the spinal curve was stretched along the grouser length direction. The soil contact surface structure of the track monomer was constructed based on functional simulation. And the bionic structure of the track monomer with superior adhesion performance was explored. The results of simulation analysis and soil tank test both showed that the attachment performance of bionic structure was better than that of an ordinary structure. It showed that adding bionic curves to the contact surface of the track monomer could significantly improve the adhesion performance, and the bionic structure with a single bionic curve arranged on the complete contact surface of the track monomer had the best adhesion performance. Moreover, the adhesion of the optimal track monomer bionic structure was increased by 19.22 N compared with an ordinary structure in the soil tank test, which verified the superiority of the track monomer bionic structure design. It provides a new method and a new idea for improving the adhesion performance of tracked vehicle in hilly areas.