Substantial effort has been devoted to both scientific and technological developments of wearable, flexible, semitransparent, and sensing electronics (e.g., organic/perovskite photovoltaics, organic thin‐film transistors, and medical sensors) in the past decade. The key to realizing those functionalities is essentially the fabrication of conductive electrodes with desirable mechanical properties. Conductive polymers (CPs) of poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) have emerged to be the most promising flexible electrode materials over rigid metallic oxides and play a critical role in these unprecedented devices as transparent electrodes, hole transport layers, interconnectors, electroactive layers, or motion‐sensing conductors. Here, the current status of research on PEDOT:PSS is summarized including various approaches to boosting the electrical conductivity and mechanical compliance and stability, directly linked to the underlying mechanism of the performance enhancements. Along with the basic principles, the most cutting edge‐progresses in devices with PEDOT:PSS are highlighted. Meanwhile, the advantages and plausible problems of the CPs and as‐fabricated devices are pointed out. Finally, new perspectives are given for CP modifications and device fabrications. This work stresses the importance of developing CP films and reveals their critical role in the evolution of these next‐generation devices featuring wearable, deformable, printable, ultrathin, and see‐through characteristics.
12 November 2013 in Energy & Environmental Science
Heteroatom doped porous carbon flakes were prepared via carbonization of Chinese human hair fibers and employed for high-performance supercapacitor electrode materials. The morphology and chemical composition of the resultant carbon materials were characterized by electron microscopy (EM), energy-dispersive X-ray spectroscopy (EDX), and X-ray photoelectron spectroscopy (XPS) measurements. Human hair carbonized at 800 °C exhibited high charge storage capacity with a specific capacitance of 340 F g−1 in 6 M KOH at a current density of 1 A g−1 and good stability over 20 000 cycles. The specific capacitance of 126 F g−1 is also verified in a 1 M LiPF6 ethylene carbonate/diethyl carbonate (EC/DEC) organic electrolyte at a current density of 1 A g−1. The high supercapacitor performance could be due to the micro/mesoporosity combined with high effective surface area and heteroatom doping effects, combining double layer and Faradaic contributions.