Several studies have focused on improving the properties of soil blocks/bricks due to perceived and real strength and durability limitations. A review of 56 published studies is presented on the effect of stabilization on the performance characteristics of soil blocks. The review found that few studies have been conducted on durability properties of enhanced soil blocks as compared with physico-mechanical properties. Fibre-enhanced soil blocks tended to have peak performance with an optimal content that achieved maximum performance. The maximum performance improvement was generally less than a doubling of the strength of the soil without the fibres. Binders showed a continual improvement with greater concentrations, so much greater improvements can be obtained if the economic and social costs can be justified. Both fibres and binders have variable performance on water absorption with both reductions and increases possible. Generally, both fibre and binder inclusion in soil blocks enhance the performance characteristics of the blocks. Binders are typically more effective on a mass-fraction basis. However the supply of fibres is usually at a lower cost and a reduced environmental impact, and therefore may have a better performance on a per-cost or per-impact basis.
11 January 2024 in International Journal of Building Pathology and Adaptation
Purpose: Using building information modelling (BIM) technology, a conventional structure in this study was converted into a green building to measure its energy usage and CO2 emissions.Design/methodology/approach: Digital images of the existing building conditions were captured using unmanned aerial vehicle (UAV), and were fed into Meshroom to generate the building’s geometry for 3D parametric model development. The model for the existing conventional building was created and converted to an energy model and exported to gbXML in Autodesk Revit for a whole building analysis which was carried out in the Green Building Studio (GBS). In the GBS, the conventional building was retrofitted into a green building to explore their energy consumption and CO2 emission.Findings: By comparing the green building model to the conventional building model, the research found that the green building model saved 25% more energy while emitting 46.8% less CO2.Practical implications: The study concluded that green building reduces energy consumption, thereby reducing the emission of CO2 into the environment. It is recommended that buildings should be simulated at the design stage to know their energy consumption and carbon emission performance before construction.Social implications: Occupant satisfaction, operation cost and environmental safety are essential for sustainable or green buildings. Green buildings increase the standard of living and enhance indoor air quality.Originality/value: This investigation aided in a pool of information on how to use BIM methodology to retrofit existing conventional buildings into green buildings, showing how green buildings save the environment as compared to conventional buildings.
15 February 2017 in Journal of Composite Materials
Soil blocks are widely used for construction, especially in less economically developed countries. Addition of agricultural waste fibres has been shown to improve the properties of these blocks, however unlike most composites the fibres are not bound to the soil matrix. Therefore, the reinforcement mechanisms are different and not well characterised. This article investigates these mechanisms through a series of experimental studies to inform the development of better guidance for practitioners, and hence improve housing for low-income communities. The microstructural characteristics were investigated using scanning electron microscopy, computerised tomography scan, optical microscope analysis and pull out testing. It was established that fibres in the soil matrix are randomly distributed with gaps between the fibres and soil matrix due to fibre shrinkage during drying of the blocks. It also found that natural fibres in soil matrix can either be pulled-out or rupture under load depending on the depth of fibres embedment in the soil matrix.
1 January 2018 in Advances in Materials Science and Engineering
Studies on sustainable construction materials are on the rise with their environmental, social, and economic benefits. This study identifies the key indicators for measuring sustainable construction materials. The design used for the study was that of a survey which relied on a questionnaire with five‐point Likert scale to generate data for the analysis. For this purpose, 25 indicators from the three dimensions (environmental, social, and economic) identified from the literature were presented to the respondents in a structured questionnaire, and responses were collected and analysed using SPSS. The study identified three key environmental indicators for measuring sustainable construction materials, and these indicators are human toxicity, climate change, and solid waste. Furthermore, adaptability, thermal comfort, local resources, and housing for all were identified as the four key social indicators for sustainable construction materials. In addition, maintenance cost, operational cost, initial cost, long‐term savings, and life span were found to be the five key economic indicators for measuring sustainable construction materials. The study therefore suggests that these twelve indicators should be considered in future studies that seek to measure sustainable construction materials.