The attachment of marine organisms, for example, bacteria, proteins, inorganic molecules, and more on a sea-submerged surface is a global concern for marine industries as it controls the surface for further marine growth. Applications requiring the estimation of real-time information from oceanographic sensors conveyed for long-term deployment are vulnerable to biofouling. Therefore, an effective approach to controlling the biofouling that accumulates on marine sensors is paramount. To date, many technologies have been explored to impede biofouling; however, several factors constrain many strategies, including their reliance on environmentally toxic materials, high fabrication costs, poor coatings, and nontransparency. These challenges have motivated work to develop numerous advanced and innovative strategies based on mechanical methods, irradiation, and design of polymeric/nonpolymeric coatings with fouling resistance, fouling release, and fouling degrading coatings to protect marine sensors and housing materials from biofouling. This Review presents recent progress in the developed biofouling control strategies that have been applied to commercially available sensors and sensor housing materials. Moreover, recent findings in the literature are highlighted while considering the wettability principles for air and water environments, antifouling performance, practical feasibility, environmental and economic impact of coatings, and field trial studies. Here, we emphasize how these features can play major roles synergistically to affect antifouling coatings against nano- to microlevel organisms. This review will not only allow researchers to understand the design principles but also contribute to the development of new cost-effective strategies.
Porous solid films which promote large apparent contact angles are interesting systems since the wetting properties are dependent on both surface structure and water penetration into the film. In this study, a parahydrophobic coating is made by sequential dip-coating of titanium dioxide nanoparticles and stearic acid on polished copper substrates. The apparent contact angles are determined using the tilted plate method, and it is found that the liquid-vapor interaction decreases and water droplets are more likely to move off the film when the number of coated layers increase. Interestingly, it is found that under some conditions the front contact angle can be smaller than the back contact angle. Scanning electron microscopy observations demonstrate that the coating process led to formation of hydrophilic TiO2 nanoparticle domains and hydrophobic stearic acid flakes which allow heterogeneous wetting. By monitoring electrical current through the water droplet to the copper substrate, it is found that the water drops penetrate the coating layer to make direct contact with the copper surface with a time delay and magnitude that depends on the coating thickness. This additional penetration of water into the porous film enhances the adhesion of the droplet to the film and provides a clue to understand the contact angle hysteresis.
Solar cells play an increasing role in global electricity production, and it is critical to maximize their conversion efficiency to ensure the highest possible production. The number of photons entering the absorbing layer of the solar cell plays an important role in achieving a high conversion efficiency. Metal nanoparticles supporting localized surface plasmon resonances (LSPRs) have for years been suggested for increasing light in-coupling for solar cell applications. However, most studies have focused on materials exhibiting strong LSPRs, which often come with the drawback of considerable light absorption within the solar spectrum, limiting their applications and widespread use. Recently, aluminum (Al) nanoparticles have gained increasing interest due to their tuneable LSPRs in the ultraviolet and visible regions of the spectrum. In this study, we present an ideal configuration for maximizing light in-coupling into a standard textured crystalline silicon (c-Si) solar cell by determining the optimal Al nanoparticle and anti-reflection coating (ARC) parameters. The best-case parameters increase the number of photons absorbed by up to 3.3%. We give a complete description of the dominating light–matter interaction mechanisms leading to the enhancement and reveal that the increase is due to the nanoparticles optically exhibiting both particle- and thin-film characteristics, which has not been demonstrated in earlier works.
6 December 2022 in Journal of Vacuum Science & Technology B
We use the fixed beam moving stage (FBMS) electron beam lithography technique to pattern a 10 mm long slot waveguide with s-bend tapered double-tip couplers. The fabrication method solves two major limitations of the FBMS mode, namely, the requirement for fixed-width structures and the incidence of stage placement drift for patterns involving elements of different widths. This has been achieved by fracturing the outline of the structure into fixed-width elements of gradually increasing width and creating intermediate overlap areas between the elements to mitigate the stage placement drifts.