Magnetic carbon nanocomposites (α-Fe/Fe3C@C) synthesized employing fructose and Fe3O4 magnetite nanoparticles as the carbon and iron precursors, respectively, are analyzed and applied for the removal of Cr (VI). Initial citric acid-coated magnetite nanoparticles, obtained through the co-precipitation method, were mixed with fructose (weight ratio 1:2) and thermally treated at different annealing temperatures (Tann = 400, 600, 800, and 1000 °C). The thermal decomposition of the carbon matrix and the Fe3O4 reduction was followed by thermogravimetry (TGA) and Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction, Raman spectroscopy, SQUID magnetometry, and N2 adsorption–desorption isotherms. A high annealing temperature (Tann = 800 °C) leads to optimum magnetic adsorbents (high magnetization enabling the magnetic separation of the adsorbent from the aqueous media and large specific surface area to enhance the pollutant adsorption process). Cr (VI) adsorption tests, performed under weak acid environments (pH = 6) and low pollutant concentrations (1 mg/L), confirm the Cr removal ability and reusability after consecutive adsorption cycles. Physical adsorption (pseudo-first-order kinetics model) and multilayer adsorption (Freundlich isotherm model) characterize the Cr (VI) absorption phenomena and support the enhanced adsorption capability of the synthesized nanostructures.
The nanoscale engineering of doped iron oxide magnetic nanoparticles has attracted significant interest in recent years for high-frequency theragnostic applications, where simultaneous diagnosis and therapy are required. In particular, their ability to generate localized heating under alternating magnetic fields makes them ideal candidates for magnetic hyperthermia, a noninvasive cancer treatment technique. However, understanding the complex interplay between multiple dopant cations and their impact on dynamic magnetic behavior remains a significant challenge. In this work, we present a comprehensive study on how two differently marked cations (Co2+ and Ga3+) can modify both the magnetic properties of these nanoparticles and their efficiency in heat generation under alternating magnetic fields. To this end, a series of nanoparticles with the formula CoxGa0.15Fe2.85‑xO4 (0 < x < 0.3) was prepared via thermal decomposition, enabling the production of monodisperse nanocrystals with high crystallinity and precise stoichiometric control. Their exhaustive structural and magnetic characterization confirmed site-selective incorporation of Ga3+ into tetrahedral sites and Co2+ into octahedral sites. Increasing the cobalt content within the gallium-doped framework leads to enhanced magnetocrystalline anisotropy and higher saturation magnetization, both crucial parameters for efficient heat dissipation in magnetic hyperthermia. The study further demonstrates that the dynamic magnetic response of these nanostructures is strongly influenced by the interplay between doping composition, anisotropy, and the amplitude of the applied magnetic field. These findings highlight the effectiveness of nanoscale codoping strategies in fine-tuning magnetic behavior and optimizing the performance of spinel ferrite nanoparticles for advanced biomedical and technological applications, particularly high-frequency magnetic hyperthermia.
20 November 2024 in Journal of Chemical Technology & Biotechnology