Skid resistance is essential for road user safety and depends directly on the texture of the pavement. This texture is related to the surface texture of the aggregates. During its lifetime, the texture of the pavement evolves under the wear induced by road traffic. This phenomenon is called polishing. This paper presents a multiscale method based on the continuous wavelet decomposition of pavement texture to follow the evolution of the texture of aggregates during polishing at different scales. Several indicators are proposed to assess texture evolution and to correlate with friction evolution. The relevance of these parameters is assessed on samples composed of aggregates, which surface is characterized through laboratory experiments.
24 March 2023 in Road Materials and Pavement Design
It is known from the literature that skid resistance is closely related to road surface roughness. This paper aims to develop a multiscale texture decomposition method able to identify the relevant scales that affect pavement surfaces’ skid resistance variation during polishing. This method is based on continuous wavelets decomposition and. It is applied on seven pavement surfaces before and after polishing. The polishing is done in the laboratory using the Wehner & Schulze apparatus, which also serves for skid esistance measurements. At each step of polishing, 3D topographical maps of the test surface are realised with an optical sensor. On these maps, multiscale texture parameters are calculated after the multiscale decomposition. Analysis of these parameters shows their ability to represent the increase and the rate of increase in skid resistance in early age (increase in multiscale parameters for scale range 300–3000 µm) of pavement surfaces and the long-time skid resistance decrease (decrease in multiscale parameters for scale range 0–1000 µm.
The paper presents an experimental study conducted to evaluate the feasibility of using accelerometers as an indirect means to estimate water depths on road surfaces. It makes use of the vibration of the vehicle’s wheel arch due to water droplets projected by a tire rolling on a wet road surface. A trailer equipped with a wheel and towed by a van was used. The test setups to spread water on the road surface and before the test wheel, measure the water depth and visualize the water spray are described. The test program, conducted on a test track closed to the traffic, includes three surfaces and two speeds. Visualization of water flows by means of high-speed cameras makes it possible to choose a suitable location for the accelerometers. It turns out that signals provided by the accelerometers are affected by the trailer’s movement; a filtering method has been successfully developed to remove noises. Results show a tight relationship between the mean amplitude of accelerometric signals and actual water depths. Discussions are made in terms of effects of the vehicle speed and the road surface texture. Perspectives for using the developed system to improve passenger safety under autonomous driving conditions are presented.
17 February 2023 in Surface Topography: Metrology and Properties
In this paper, a multiscale texture analysis method is developped and applied to aggregates surfaces to better explain the variation of road friction during polishing process. This method is based on continuous wavelets decomposition. The study is done on five aggregates types by varying aggregates hardness and mineralogical composition. Polishing tests and friction measurement are performed on each formula using Wehner & Schulze appartus to follow the evolution of friction with polishing. At each polishing stage, 3D mapping are made using Alicona Infinite Focus Sensor to follow the evolution of the surface texture. On these cartographies, multiscale texture parameters are calculated and analysed. Correlations between theses parameters and friction show that scales ranging between 0 and 1000 μm seem to be the most relevant to explain friction evolution.
This paper presents an evaluation of a system aiming at estimating water depths on a road surface. Using accelerometers, the system records the vibrations of a wheel arch liner due to impacts of water droplets. The system setup, including the location of the accelerometers on a wheel arch and the data acquisition, is described. Tests were performed with a passenger car on various road surfaces and at different vehicle speeds and water depths. Signals recorded by the accelerometers are filtered and processed. The link between the acceleration amplitude, the water depth, and the vehicle speed is consistent with results from previous studies. The effect of the surface texture is less obvious and needs further investigations. A mathematical model has been developed to relate the acceleration amplitude to the water depth. The potential application of the developed system to on-board evaluation of pavement wetness, and consequently the pavement skid resistance, is discussed. Perspectives for driver assistance, or more generally, for autonomous driving to improve traffic safety, are also highlighted.