Audrey Zahra

Ms. Audrey Zahra

Forest Product, Chungbuk National University, Cheongju-si, Republic of Korea
orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
14 December 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Audrey ZahraAudrey Zahra
Audrey Zahra
SLSeo-Kyoung Lim
Seo-Kyoung Lim
SSSoo-jeong Shin
Soo-jeong Shin
IYIk-joon Yeon
Ik-joon Yeon
Green tea waste (GTW) is a naturally abundant material, and it has not been widely reused into more valuable materials. The composition of GTW was identified using NMR for carbohydrate composition, an element analyzer for protein content, acetone and hot water extraction for evaluating extractives, and Klason lignin for lignin content. GTW can be converted into nanoparticles by carboxymethylation as pretreatment of the degree of substitutions (DS) and high-pressure homogenizer for nanoparticle making. GTW was prepared using various DS 0 until DS 0.4. The results showed that GTW DS has a more than −30 mV zeta potential, suitable for stable nanoemulsion formulations. The particle size of GTW DS decreases with increasing carboxyl content in the hydrogel, which has a width and length from GTW DS 0.3 to DS 0.4. As a humectant, the water retention value (WRV) of GTW with various DS was increased; DS 0.3 is the best. DS 0.4 has the highest viscosity, storage, and loss modulus as rheology modifiers.

30 June 2022 in Journal of Korea Technical Association of The Pulp and Paper Industry
Verified
Journal Article
Closed access
Audrey ZahraAudrey Zahra
Audrey Zahra
SGShangmin Gao
Shangmin Gao
JPJong-Moon Park
Jong-Moon Park
SSSoo-Jeong Shin
Soo-Jeong Shin
Rice is widely produced; however, large quantities of non-edible biomass are also generated during its production, mainly straw and hulls. These lignocellulosic materials have great value potential but are less used than other biomass resources. We produced cellulose nanofiber (CNF) from rice husks through delignification (as chlorine dioxide bleaching), pretreatment (as carboxymethylation substitution reaction), and nanofiber-making processes (as supermass-collider grinding and high-pressure homogenization). The rheological properties of rice-hull cellulose nanofiber were investigated to determine the relationship between carboxyl content, number of grinding, and high-pressure homogenization to rheological properties of rice-husk CNF gels. Increased carboxymethylation and mechanical treatments lead to higher viscosity, better hydrogel strength, and water retention value (WRV). Further mechanical processes decreased the viscosity and hydrogel strength after attaining the maximum value. For high-quality hydrogel production, optimum pretreatment and mechanical processes are required as pretreatment to DS 0.3 for carboxymethylation and optimum grinding and high-pressure homogenization combination.

22 January 2024 in Polysaccharides
Verified
Journal Article
Open access
PDF file
Audrey ZahraAudrey Zahra
Audrey Zahra
SLSeo-Kyoung Lim
Seo-Kyoung Lim
SSSoo-jeong Shin
Soo-jeong Shin
Rice hulls have a high-value potential, and the lignocellulose components are underutilized compared to other biomass resources. Pretreatments such as carboxymethylation of the degree of substitutions (DS) are used to prepare lignocellulose nanofibril (LCNF) from desilicated rice hull (DSRH). High-pressure homogenization (HPH) and grinding are used to process nano fibrillation. The composition of LCNF DS of desilicated rice hull was identified using 1H NMR for polysaccharide composition and DS determination, acetone and hot water extraction to evaluate extractives, and Klason lignin for lignin content. LCNF was prepared using various DS from 0.2 until DS 0.4. The results showed that LCNF DS has a more than −30 mV zeta potential, suitable for stable nanoemulsion formulations. The particle size of LCNF DS decreases with an increasing carboxyl content in the hydrogel and an increasing number of passes through grinding and high-pressure homogenization, of which LCNF DS 0.4 had the smallest width and length. Mechanical processes further reduced the size.

30 October 2021 in Journal of Korea Technical Association of The Pulp and Paper Industry
Verified
Journal Article
Closed access
RRRahmini Rahmini
Rahmini Rahmini
Audrey ZahraAudrey Zahra
Audrey Zahra
DLDa-Young Lim
Da-Young Lim
SSSoo-Jeong Shin
Soo-Jeong Shin
Jute fiber was proposed as an alternative raw material for dissolving pulp production. Jute fiber had cellulose (71.8%±0.1%), xylan (10.8%±0.1%), lignin (13.7%±0.2%), and extractives (3.8%±0.0%). In this study, jute fiber was hydrolyzed with H₂SO₄ to remove xylan. To achieve the best conditions for removing hemicellulose and obtaining a high cellulose content, acid hydrolysis pretreatment was performed at various acid concentrations (0.25-1 N), reaction times (60-120 min), and temperatures (100°C-120°C). The results showed that the optimum condition of acid hydrolysis for higher dissolving pulp raw material yield within less than 5.0% xylan was cellulose (60.5±0.2) and xylan (2.9±0.2) at 1 N H₂SO₄, 100°C for 90 min. However, by increasing the reaction temperature to 120°C for 120 min, the chemical used was reduced to 0.25 N H₂SO₄ and the highest purity of cellulose was produced, with cellulose and xylan content of 56.1%±0.1% and 1.3%±0.1%, respectively.

30 October 2021 in Journal of Korea Technical Association of The Pulp and Paper Industry
Verified
Journal Article
Closed access
Audrey ZahraAudrey Zahra
Audrey Zahra
SLSeo-Kyoung Lim
Seo-Kyoung Lim
SSSoo-Jeong Shin
Soo-Jeong Shin
Rice hull was proposed as an alternative raw material for cellulose production. Rice hull has cellulose (38.6+/-0.1%), xylan (12.8+/-0.1%), lignin (22.7+/-0.7%), extractives (7.9+/-0.4%), and inorganic (13.2+/-0.8%).Inorganic was selectively removed using moderate alkaline extraction, and lignin was degraded via oxidation with chlorine dioxide or hypochlorite. In this study, dilute acid hydrolysis was used to selectively remove hemicellulose, resulting in purer cellulose and better yield. Xylan was selectively removed using sulfuric acid at various acid concentrations (0.25–1 N), reaction time (60–120 min), and temperature (100–120°C) with desilicated and delignified biomass. The reaction conditions for >90% cellulose purity were 120°C and 1.0 N sulfuric acids. Increasing the reaction duration resulted in higher cellulose purity, with the greatest purity being 96.1% at 1.00 N sulfuric acid, 120°C, and 120-min reaction time.

30 June 2022 in Journal of Korea Technical Association of The Pulp and Paper Industry
Verified
Journal Article
Closed access
Audrey ZahraAudrey Zahra
Audrey Zahra
WSWoo-Yong Song
Woo-Yong Song
SLSeo-Kyung Lim
Seo-Kyung Lim
HSHyeon-A Seong
Hyeon-A Seong
SSSoo-Jeong Shin
Soo-Jeong Shin
Apple powder residue obtained after a beverage-making process was evaluated to determine if it is suitable for making nanofibers by the carboxymethylation substitution reaction as pretreatment and high-pressure homogenization for nanofibrillation with three different cultivars. The sugar compositions of the three cultivars (Arisu, Busa, and Gamhong) were similar, but the uronic acid content (glucuronic acid, galacturonic acid) was lower and glucose content higher in the Gamhong cultivar than in the other cultivars. This characteristic resulted in a lower negative zeta potential of the Gamhong cultivar than of the other cultivars. In nanoparticle size analysis, the nanofiber width was 55.4-56.9 ㎚ for the Arisu and Busa cultivars, which was smaller than the nanofiber width of 84.3-84.4 ㎚ of the Gamhong cultivar for a 0.4 degree of substitution carboxymethylated apple nanofiber.