Y Shriraj Rao

Dr. Y Shriraj Rao

Mechanical and Industrial Engineering Department, Manipal Institute of Technology, Manipal Academy of Higher Education, Manipal, India
orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
26 October 2019 in Materials and Manufacturing Processes
Verified
Journal Article
Closed access
YRY Shriraj Rao
Y Shriraj Rao
NMNanjangud Subbarao Mohan
Nanjangud Subbarao Mohan
NSNagaraja Shetty
Nagaraja Shetty
Basavannadevaru ShivamurthyBasavannadevaru Shivamurthy
Basavannadevaru Shivamurthy
Fiber-reinforced polymer (FRP) composites are widely being used for structural applications due to their attractive properties. Particularly, to fabricate complicated structures by FRP composites, joining composite structure elements through fasteners require drilled holes. More than 60% of the structural FRP components are rejected owing to poor quality of holes. The FRP composites are heterogeneous due to multi-layer architecture, multi-phase material combinations, and hybridization. Hence, while drilling the behavior of FRP composites depends on various machining and tool parameters in addition to workpiece properties. As a result of drilling, the quality of drilled holes deteriorates due to delamination, matrix crack, matrix burning, fiber pull-out, buckling, spalling, and fuzzing in the drilled hole zone. To minimize all these defects researchers tried to design material, tool and machining parameters and reported. In this paper, the authors have made an attempt to summarize up-to-date progress in structure properties and drilling study of unidirectional and bidirectional multi-layered composites, three-dimensional fabric-reinforced composite and hybrid composite and similarly, emphasize the advanced characterization techniques to investigate the drilled hole quality. In addition, cryogenic assisted drilling, lubricated drilling, and micro-drilling literatures have been discussed. Based on the literature, conclusions and future scope have been reported.

20 February 2023 in Cogent Engineering
Verified
Journal Article
Open access
YRY Shriraj Rao
Y Shriraj Rao
Basavannadevaru ShivamurthyBasavannadevaru Shivamurthy
Basavannadevaru Shivamurthy
NMNanjangud Subbarao Mohan
Nanjangud Subbarao Mohan
NSNagaraja Shetty
Nagaraja Shetty
SMSanjay M.R.
Sanjay M.R.
Suchart SiengchinSuchart Siengchin
Suchart Siengchin
The present study aims to improve the tensile and hardness properties of carbon fabric–reinforced epoxy composite (CFEC) by using hexagonal boron nitride (h-BN) and molybdenum disulfide (MoS2) fillers. Magnetic stirring and ultrasonication were used to disperse fillers in epoxy resin. CFEC, h-BN filled CFEC and MoS2 filled CFEC fabricated as per hand layup and vacuum bag technique. The tensile strength of CFEC was remarkably improved up to 6 wt.% h-BN and MoS2 addition separately in the resin matrix. The maximum tensile strength of 486 MPa and Young’s modulus of 44 GPa were noticed in 6 wt.% h-BN incorporated CFEC displaying 59% and 47% improvements, respectively. The maximum toughness is shown by 6 wt.% MoS2 incorporated CFEC indicating 102% improvement. The uniformly dispersed high-performance filler in the epoxy effectively transferred stress, improving tensile properties. However, filler agglomerates, stress-raising spots, and poor filler–matrix interaction beyond 6 wt.% filler reduced the tensile property improvement. The introduction of h-BN and MoS2 in the composite increased hardness, with 6 wt.% h-BN added CFEC recording the highest hardness denoting 23% greater than the neat CFEC.

1 April 2021 in Polymer Testing
Verified
Journal Article
Open access
YRY Shriraj Rao
Y Shriraj Rao
NMNanjangud Subbarao Mohan
Nanjangud Subbarao Mohan
NSNagaraja Shetty
Nagaraja Shetty
BSBasavannadevaru Shivamurthy
Basavannadevaru Shivamurthy

23 January 2023 in Journal of Composites Science
Verified
Journal Article
Open access
PDF file
YRY Shriraj Rao
Y Shriraj Rao
NMNanjangud Subbarao Mohan
Nanjangud Subbarao Mohan
NSNagaraja Shetty
Nagaraja Shetty
SASUBASH ACHARYA
SUBASH ACHARYA
Carbon-fiber-reinforced epoxy composite (CEC) has gained widespread acceptance as a structural material in various applications. Drilled holes are essential for assembling composite material components. Reducing drilling-induced damage and temperature effects is crucial for improved surface quality and integrity of the drilled composite. In the present work, drilling experiments were conducted on CEC, hexagonal-boron nitride (h-BN) dispersed CEC, and molybdenum disulfide (MoS2) dispersed CEC at three different levels of spindle speed, feed, and drill diameter using solid carbide twist drills. The filler concentrations used in this study were 4, 6, and 8 wt%. Analysis of variance (ANOVA) was used to determine the significance of input factors (feed, spindle speed, drill diameter, and filler concentration) on the drilling responses such as thrust force, temperature, arithmetic mean surface roughness (Ra), and push-out delamination factor (DFexit). The average drilling temperature, Ra, and DFexit of MoS2 dispersed CEC were reduced by 24.7, 46.5, and 11.3%, respectively, when compared to neat CEC. In h-BN dispersed CEC, the average drilling temperature, Ra, and DFexit were reduced by 25.2, 40.9, and 13.2%, respectively, compared to neat CEC. The lubricating properties and high thermal conductivity of filler added to epoxy are responsible for the lower temperature and improved hole surface finish. The improved delamination resistance in filler-loaded CEC is due to the strengthening of the matrix and fiber–matrix interface. Scanning electron microscopy (SEM) was used to examine the morphology of the drilled composite surface. The spindle speed of 5500 rpm, feed of 0.03 mm.rev−1, and filler loading of 4 wt% produced the minimum Ra and DFexit. The response surface method (RSM) was applied to determine the input parameters based on multi-response optimum criteria.

22 September 2022 in Fracture and Structural Integrity
Verified
Journal Article
Open access
PDF file
YRY Shriraj Rao
Y Shriraj Rao
SBShivamurthy Basavannadevaru
Shivamurthy Basavannadevaru
NSNanjangud Mohan Subbarao
Nanjangud Mohan Subbarao
NSNagaraja Shetty
Nagaraja Shetty
Hexagonal boron nitride (hBN) and molybdenum disulfide (MoS2) fillers of 2 to 8 wt.% influence on toughness, microhardness and thermal stability of carbon fabric-reinforced epoxy composite (CFREC) reported. Mode-I, mixed-mode I/II toughness and microhardness of CFREC improved due to the addition of hBN and MoS2 separately upto 6 wt.% filler loading. The epoxy matrix in CFREC modified by hBN and MoS2 strengthens the matrix, deflects the crack path and resists delamination. Toughness reduced beyond 6 wt.% filler addition due to agglomeration and poor fiber-filler-matrix bonding as revealed by the surface morphology of the fracture specimen. Thermal analysis reveals decomposition temperature at 25% weight loss increased from 395 to 430 °C and 395 to 411 °C due to 4 wt.% MoS2 and 4 wt.% hBN addition to CFREC respectively. Impermeable characteristics of MoS2 and hBN fillers caused tortuous diffusion path for gas molecules and delayed thermal decomposition.