Alexandr Alexandrovich Solovyov

Mr. Alexandr Alexandrovich Solovyov

Institute of Problems of Mechanical Engineering, Institute of Applied Physics of the Russian Academy of Sciences, Nizhniy Novgorod, Nizhegorodskaya Oblast’, Russia
orcid

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
26 April 2023 in Metals
Verified
Journal Article
Open access
PDF file
YKYury Kabaldin
Yury Kabaldin
DSDmitrii Shatagin
Dmitrii Shatagin
DRDmitrii Ryabov
Dmitrii Ryabov
Alexandr Alexandrovich SolovyovAlexandr Alexandrovich Solovyov
Alexandr Alexandrovich Solovyov
Andrey KurkinAndrey Kurkin
Andrey Kurkin
Currently, additive manufacturing technologies for materials and products are being implemented and improved. This is due to the possibility of creating workpieces with complex geometric shapes and specified functional gradient properties. The materials with the most complex functional properties demanded by the military–energy industry include bimetals of the “low-alloyed carbon steel—stainless chromium-nickel steel” type. One of the promising ways to obtain bimetallic products is the WAAM (Wire Arc Additive Manufacturing) technology. Despite the large scientific groundwork, the composition, structure, and properties of bimetallic composites produced by WAAM have not been sufficiently studied. The aim of the current work is to study the effect of WAAM parameters and the subsequent heat treatment on the composition, structure, and physical and mechanical properties of the bimetallic composite “ER70S-6-R309LSI”. Spectral, metallographic, and X-ray diffraction studies were carried out, as were mechanical tests of the samples obtained under various WAAM modes. In order to improve the composites’ properties, various types of heat treatments were applied. It is shown that the WAAM modes, the building strategy, and heat treatment determine the structure of layers and transition zones, as well as the mechanical characteristics of the composite. The structure of ER70S-6 in the composite is represented by the ferrite and the ferrite–cementite mixture (pearlite), and ER309LSI is represented by different ratios of austenite, δ-ferrite, carbide, and intermetallic phases. From the point of view of the mechanical properties, the most promising mode of surfacing is “Double Pulse”, followed by heat treatment by way of austenitization and normalization annealing. In this case, there is a decrease in the content of the δ-ferrite, a leveling of microhardness values, and a 40% increase in the tensile strength of the composite.

29 June 2024 in Acoustics
Verified
Journal Article
Open access
PDF file
AGAlexander Gonchar
Alexander Gonchar
Alexandr Alexandrovich SolovyovAlexandr Alexandrovich Solovyov
Alexandr Alexandrovich Solovyov
VKVyacheslav Klyushnikov
Vyacheslav Klyushnikov
Currently, ultrasonic methods for assessing the fatigue lifetime of various structural materials are being actively developed. Many steel constructions are made by welding. The weld heat-affected zone is the weak point of the construction, as it is most susceptible to destruction. Therefore, it is actually important to search for acoustic parameters that uniquely characterize the structural damage accumulation in the heat-affected zone of a welded joint in order to predict failure. In this work, the specimens were made from the base metal and the welded joint’s heat-affected zone. The specimens were subjected to uniaxial tension–compression under a symmetrical cycle in the region of low-cycle fatigue with control of the strain amplitude. The propagation bulk velocities of longitudinal, shear waves and subsurface longitudinal critically refracted (LCR) waves during cyclic loading were studied. The acoustic birefringence of shear waves was calculated, and a similar parameter was proposed for longitudinal and LCR waves. The dependence of the elastic modulus ratio on the cycle ratio was obtained. It was shown that the acoustic parameters change most intensively in the heat-affected zone. According to the data of the C33/C55 ratio changes measured through the ultrasonic method, a formula for calculating the remaining fatigue life in the heat-affected zone was proposed.

19 June 2023 in Russian Journal of Water Transport
Verified
Journal Article
Open access
PDF file
AKAlexander A. Khlybov
Alexander A. Khlybov
DRDmitry A. Ryabov
Dmitry A. Ryabov
Alexandr Alexandrovich SolovyovAlexandr Alexandrovich Solovyov
Alexandr Alexandrovich Solovyov
МАМаксим Сергеевич Аносов
Максим Сергеевич Аносов
YMYuri I. Matveev
Yuri I. Matveev
АСАлександр Александрович Соловьев
Александр Александрович Соловьев
The paper presents the results of a study of the influence of the degree of deformation under uniaxial tension on the structure and physico-mechanical properties of 20KHGSA steel obtained by 3D printing by electric arc surfacing. It is shown that additive technologies for the production of materials and products have become widespread. In particular, the technologies of electric arc cultivation (WAAM method) are of particular interest. The undoubted advantage of the WAAM method is the relatively low cost of equipment and surfaced material (in comparison with laser or electron beam equipment), as well as the possibility of obtaining large-sized blanks with the least number of defects. A comparative analysis of the influence of the direction of surfacing on the properties of samples during mechanical tests is carried out. It is established that the destruction of the material occurs more intensively in the sample cut perpendicular to the direction of surfacing. Non-destructive methods for estimating the deformed state of 20KHGSA steel under uniaxial tension are proposed. It is shown that one of the most sensitive non-destructive methods for assessing the deformed state of metallic materials is the ultrasonic echo-pulse control method, which is a useful quantitative tool for monitoring the state of the material due to its simplicity and reliability. The magnetic control method has a high sensitivity to deformations. The dependence of the magnetic properties of metals (in particular, the coercive force Hc) on the degree of deformation of the material is shown

11 February 2025 in Металловедение и термическая обработка металлов
Verified
Journal Article
Closed access
PDF file
АХАлександр Анатольевич Хлыбов
Александр Анатольевич Хлыбов
ДРДмитрий Александрович Рябов
Дмитрий Александрович Рябов
Alexandr Alexandrovich SolovyovAlexandr Alexandrovich Solovyov
Alexandr Alexandrovich Solovyov
АШАнна Алексеевна Шуянова
Анна Алексеевна Шуянова
АДАлина Александровна Демченко
Алина Александровна Демченко
Исследованы процессы формирования структуры и свойств заготовок из жаропрочного никелевого сплава ЭП741НП, полученных методом горячего изостатического прессования (ГИП), а также влияние термической обработки (ТО) на его свойства. Установлено, что в заготовке после ГИП присутствуют поры, при этом распределение их объемной доли по сечению неравномерно. Проведен цифровой анализ микроструктуры на периферии и в центре заготовки, определены размер и анизотропия зерна. Выполнена оценка основных механических характеристик сплава ЭП741НП после ГИП и последующей ТО (закалка и трехступенчатое старение) в диапазоне температур 20 – 900 °C. Установлено, что проведение ТО способствует повышению прочностных характеристик сплава ЭП741НП во всем температурном интервале испытаний. Определено изменение твердости, модулей нормальной упругости E и сдвига G по сечению заготовки после ГИП и последующей ТО.