Flexible devices are garnering substantial interest owing to their potential for wearable and portable applications. Here, flexible and self‐powered photodetector arrays based on all‐inorganic perovskite quantum dots (QDs) are reported. CsBr/KBr‐mediated CsPbBr3 QDs possess improved surface morphology and crystallinity with reduced defect densities, in comparison with the pristine ones. Systematic material characterizations reveal enhanced carrier transport, photoluminescence efficiency, and carrier lifetime of the CsBr/KBr‐mediated CsPbBr3 QDs. Flexible photodetector arrays fabricated with an optimum CsBr/KBr treatment demonstrate a high open‐circuit voltage of 1.3 V, responsivity of 10.1 A W−1, specific detectivity of 9.35 × 1013 Jones, and on/off ratio up to ≈104. Particularly, such performance is achieved under the self‐powered operation mode. Furthermore, outstanding flexibility and electrical stability with negligible degradation after 1600 bending cycles (up to 60°) are demonstrated. More importantly, the flexible detector arrays exhibit uniform photoresponse distribution, which is of much significance for practical imaging systems, and thus promotes the practical deployment of perovskite products.
Solution-processed materials, including halide perovskites and newly discovered MXenes, are emerging as promising candidates for next-generation optoelectronic devices. Here, large-scale image sensor arrays (1250 pixels) based on a MXene/perovskite/MXene structure are demonstrated by utilizing top-down techniques, i.e. spin-coating and laser-scribing. The work allows processing perovskite and MXene materials into sub-millimeter photodetector arrays on a large scale with potential for further down-scaling of the device dimensions. The favorable energy level alignment and resonance enhancement of such materials enable efficient charge transfer and detection up to the near infrared region. A high responsivity of 84.77 A W−1, a high specific detectivity of 3.22 × 1012 Jones, and a large linear dynamic range (LDR) up to 82 dB in a broadband wavelength range from visible to near-infrared are achieved. In addition, the device shows an excellent image-capture capability under near infrared illumination. Given the tunability and compatibility with complementary metal–oxide–semiconductors (CMOS), the method potentially promotes the development of low-cost, high-performance, and large format photodetector arrays.