Artisanal and small-scale gold mining activities have an impact on natural resources and human health. This study addresses the assessment of surface water quality in the Lom gold basin. A combined approach of water quality index calculation, multivariate statistical analysis and spatial interpolation was used. Sampling was performed at 15 stations during low- and high-water periods in 2021 for classical physicochemical parameters and total mercury measurements. The results show that the physicochemical parameters were below drinking water standards for both periods, except for pH, total suspended solids and total mercury. These waters show a large cation deficit as well as an anion deficit. The water chemistry is controlled by precipitations and silicate dissolutions in rock that convert the water into the Ca-HCO3 and Ca-Mg-HCO3 types. The level of mercury contamination varied from acceptable to high due to high flow rates during high water that cause a dilution effect for the mercury concentration upstream and its accumulation downstream. The water quality varied from excellent to very poor with better quality during the high-water period. The Lom watershed is locally affected by physical and chemical pollution due to the abundance of suspended solids and mercury resulting from the different gold mining activities.
This research quantifies mercury use and models its transport in artisanal and small-scale gold mining (ASGM) in the Lom River during two key periods of intense mining activities and high water flow. Mercury concentrations from mining surfaces were estimated using a soil input function approach. Industrial mercury releases were assessed with a ratio-based approach using official gold production data and the mercury-to-gold ratio. The PEGASE model was applied to simulate mercury transport and pollution in the Lom River and to analyze the pressure–impact relationships of ASGM activities on surface water. Field measurements of the mercury concentrations in the Lom River during the dry and rainy seasons of 2021 were used to validate modeling results. The results indicate that volatilization has a more significant impact on the predicted mercury concentrations than photodissociation. Three scenarios were modeled for mercury use: whole ore amalgamation (WOA), combined whole and concentrate ore amalgamation (WOA + COA), and concentrate ore amalgamation (COA). Mercury use estimates ranged from 2250–7500 kg during intense activity to 1260–4200 kg during high water for the gold production of 750 and 525 kg, respectively. Industrial discharges dominated mercury pollution during the dry season while leaching from mining surfaces was the primary contributor during the rainy season.